Shipfitter
2 weeks ago
Shipyard Experience is required. Housing assistance is available.
Please contact our team for more informationCell: or *Please send us a text if we don't answer*
POSITION SUMMARY:
- Layout and fabricate metal structural parts, such as plates, bulkheads, and frames.
- Brace them in position within the hull of ships for riveting or welding.
- May prepare molds and templates for fabrication of nonstandard parts according to specifications.
ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING:The essential duties and responsibilities may be different than described.
- Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays.
- Comply with the company, Federal, State, and local safety, ethics, and environmental rules, regulations, and policies while performing duties.
- Layout the position of parts on metal, working from blueprints or templates and using a scribe and hand tools.
- Locate and mark reference lines, such as center, buttock, and frame lines.
- Align parts with each other, using jacks, turnbuckles, clips, wedges, and mauls.
- Mark the location of the holes to be drilled and install temporary fasteners to hold the part in place for welding or riveting.
- Prepare molds and templates for the fabrication of nonstandard parts.
- Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips.
- Tack weld clips and brackets in place before permanent welding.
- Accountable for the completion of daily work assignments.
- Flag cranes and pull angle iron as required.
- Work with minimal supervision.
- Perform other duties as assigned.
Job Requirements:Education/ Experience:
- High school diploma or GED equivalent, plus three to five years of ship fitting experience desired.
- Knowledge of materials, methods, and the appropriate tools to construct marine vessels required.
- An equivalent combination of education and experience may be considered.
- Must be able to cut and burn with a torch or plasma cutter.
- Tack weld with stainless rods, MIG, and aluminum.
- Requires knowledge of ship terminology, safety, and OSHA regulations.
- Ability to read and comprehend written, oral, or diagram forms.
- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
- Ability to read and understand blueprints.
- Knowledge of the safe operation and use of hand and power tools.
- Ability to add, subtract, multiply, and divide into all units of measure.
- Ability to read a tape measure.
- Integrity, ethics, flexibility/ adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multitasking.
- Maintain the confidential integrity of details pertaining to the shipyard.
PHYSICAL DEMANDS:
- While performing the duties of this job, the employee is regularly required to communicate.
- The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms.
- This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday.
- The employee must frequently lift and/ or move up to 50 pounds.
- The specific vision and abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
- The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards.
- The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space.
Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other basis protected by local, state, or federal law.
About LaborOne Staffing:
We're always hiring Great people for our projects. We have work available for Skilled Craft - Welders, Fitters, Electricians, Machinists, Blaster Painters, Fire Watch General Labor, Etc. in Shipyards on both coasts and along the Gulf Coast region.We also have General Labor jobs available in Texas, Florida, South Carolina, Virginia and California.
-
shipfitter ha
2 weeks ago
Pascagoula, Mississippi, United States HII Full timeReq ID: 37688 Team: 07 Shipfitters Entity: Ingalls ShipbuildingUS Citizenship Required for this Position: No Full-Time Shift: Multiple Relocation: No relocation assistance available Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No We're building tomorrow's fleet todayWith more than 11,000 employees, HII's Ingalls...
-
shipfitter ha
2 weeks ago
Pascagoula, Mississippi, United States HII Full timeWelcome to a Shipfitter position at Ingalls Shipbuilding!Location:Pascagoula, Mississippi, United StatesCompany: Ingalls Shipbuilding is a vital contributor to the economic growth of Alabama, employing over 11,000 individuals.Overview:The Shipfitter role at Ingalls Shipbuilding involves utilizing craftsmanship to shape steel into battle-tested ships.Job...
-
shipfitter - experienced he (june)
2 weeks ago
Pascagoula, Mississippi, United States H I I CORP Defunct Full timeJOB TITLE: Shipfitter - Experienced (June)Company: Ingalls ShipbuildingLocation: Pascagoula, Mississippi, United StatesShipfitters Entity: Ingalls ShipbuildingJob Description:The Ingalls Shipfitter role involves crafting, shaping, and assembling steel to build ships for the U.S. Navy and U.S. Coast Guard.Responsibilities include working with various tools to...
-
foreman shipfitter
2 weeks ago
Pascagoula, Mississippi, United States HII Full timeFOREMAN SHIPFITTERLocation:Pascagoula, Mississippi, United StatesDate:Jun 17, 2024Req ID: 38004Team: 81 HullEntity: Ingalls ShipbuildingUS Citizenship Required for this Position: NoFull-TimeShift: MultipleRelocation: No relocation assistance availableVirtual/Telework Opportunity: No - Not eligible for teleworkTravel Requirement:NoWe're building tomorrow's...
-
Shipfitter
2 months ago
Pascagoula, United States Ameri-Force Full timeJob DescriptionJob Description3+ years of prior experience, as a shipfitterWorking from blueprints or templates, lays out position of parts on metal using a scribe and hand tools.Locates and marks reference lines.Positions parts in hull of vessel with assistance from a Tacker or Helper.Align parts in relation to each other using jacks, come-a-longs,...
-
Shipfitter
4 weeks ago
Pascagoula, United States Ameri-Force Full timeJob DescriptionJob Description3+ years of prior experience, as a shipfitterWorking from blueprints or templates, lays out position of parts on metal using a scribe and hand tools.Locates and marks reference lines.Positions parts in hull of vessel with assistance from a Tacker or Helper.Align parts in relation to each other using jacks, come-a-longs,...
-
Shipfitter
2 months ago
Pascagoula, United States B&D Contracting, Inc Full time $29GENERAL FUNCTION: The shipfitter is responsible for the surface preparation of structural metal components and the lay out and fabrication of metal structural parts within the hull of a vessel for riveting and welding.TYPICAL DUTIES AND RESPONSIBILITIES: The following statements are intended to describe the general nature and level of work being performed...
-
Shipfitter
1 month ago
Pascagoula, United States ARC Energy Full timeJob Title: Advance Shipfitter Location: Various Job Site and Locations. Hourly Rate: Depending on Experience. About Us: We are a veteran owned mechanical contractor, supplies welding, machining, heat treating and NDE services to the power and process industries. We specialize in delivering piping and boiler services through planned outages, emergent work,...
-
Shipfitter
4 weeks ago
Pascagoula, United States ARC Energy Full timeJob Title: Advance Shipfitter Location: Various Job Site and Locations. Hourly Rate: Depending on Experience. About Us: We are a veteran owned mechanical contractor, supplies welding, machining, heat treating and NDE services to the power and process industries. We specialize in delivering piping and boiler services through planned outages, emergent work,...
-
Shipfitter
1 month ago
Pascagoula, United States Arc Energy Services Full timeJob DescriptionJob DescriptionJob Title: Advance ShipfitterLocation: Various Job Site and Locations.Hourly Rate: Depending on Experience.About Us: We are a veteran owned mechanical contractor, supplies welding, machining, heat treating and NDE services to the power and process industries. We specialize in delivering piping and boiler services through planned...
-
Shipfitter
20 hours ago
Pascagoula, United States Arc Energy Services Full timeJob DescriptionJob DescriptionJob Title: Advance ShipfitterLocation: Various Job Site and Locations.Hourly Rate: Depending on Experience.About Us: We are a veteran owned mechanical contractor, supplies welding, machining, heat treating and NDE services to the power and process industries. We specialize in delivering piping and boiler services through planned...
-
Shipfitter
4 weeks ago
Pascagoula, United States Arc Energy Services Full timeJob DescriptionJob DescriptionJob Title: Advance ShipfitterLocation: Various Job Site and Locations.Hourly Rate: Depending on Experience.About Us: We are a veteran owned mechanical contractor, supplies welding, machining, heat treating and NDE services to the power and process industries. We specialize in delivering piping and boiler services through planned...
-
Ship Fitter
2 months ago
Pascagoula, United States Hutco Full timePosition: Shipfitter Job Location: Pascagoula, MS Hutco Branch: Moss Point, MS Rate of Pay: $24.10 -$26.10 per hour Description: Lays out and fabricates metal structural parts, such as plates, bulkheads, and frames, and braces them in position within Business Services, Staffing
-
Ship Fitter
4 weeks ago
Pascagoula, United States Hutco, Inc. Full timePosition: Shipfitter Job Location: Pascagoula, MS Hutco Branch: Moss Point, MS Rate of Pay: $24.10 -$26.10 per hour Description: Lays out and fabricates metal structural parts, such as plates, bulkheads, and frames, and braces them in position within Business Services, Staffing
-
Heat Straightener B
2 months ago
Pascagoula, United States B&D Contracting, Inc Full time $26 - $28GENERAL FUNCTION: The heat straightener is responsible for the fairness preparation and straightness of structural metal components. Straightens metal workpieces to blueprint specifications using hand tools. Reports directly to Foreman.TYPICAL DUTIES AND RESPONSIBILITIES: The following statements are intended to describe the general nature and level of work...
-
Shipfitter (2nd Class)
1 week ago
Pascagoula, United States Bollinger Shipyards Full timeJob DescriptionJob Description2nd Class Ship Fitter - Must have a minimum of 3 months of ship fitting experience and must be able to demonstrate the ability to accurately perform layout, cutting with a torch, metric measuring (i.e. cm, mm, etc.) and structural fitting processes by successfully passing a hands-on craft test in accordance with craft...
-
Shipfitter (1st Class)
1 week ago
Pascagoula, United States Bollinger Shipyards Full timeJob DescriptionJob DescriptionThe ideal candidates for the position must have a minimum of 3 years of ship fitting experience. Must be able to demonstrate the ability to accurately perform layout, cutting with a torch, metric measuring (i.e. cm, mm, etc.) and structural fitting processes by successfully passing a hands-on craft test.Powered by...
-
Per Diem Welder/Fitter
1 month ago
Pascagoula, United States Aerotek Full time**_JOB IS LOCATED IN Calvert City, Kentucky_****SEEKING SHIPFITTERS FOR FAST PACED WORK ENVIRONMENT****NEED TO HAVE PROPYLENE TORCH EXPERIENCE AND KNOWLEDGE****$28-34 an hr $100 a day per diem for travelers )**Job Description:+ Ability to layoff piece parts for fabrication and assembly+ Ability to assemble structural piece parts in accordance with...
-
Per Diem Welder/Fitter
4 weeks ago
Pascagoula, United States Aerotek Full time**_JOB IS LOCATED IN Calvert City, Kentucky_****SEEKING SHIPFITTERS FOR FAST PACED WORK ENVIRONMENT****NEED TO HAVE PROPYLENE TORCH EXPERIENCE AND KNOWLEDGE****$28-34 an hr $100 a day per diem for travelers )**Job Description:+ Ability to layoff piece parts for fabrication and assembly+ Ability to assemble structural piece parts in accordance with...
-
Pascagoula, United States NSC Technologies Full timeThe ideal candidates for the position must have a minimum of 3 years of ship fitting experience. Must be able to demonstrate the ability to accurately perform layout, cutting with a torch, metric measuring (i.e. cm, mm, etc.) and structural fitting p Construction, Night Shift, Staffing
-
Pascagoula, United States NSC Technologies Full timeThe ideal candidates for the position must have a minimum of 3 years of ship fitting experience. Must be able to demonstrate the ability to accurately perform layout, cutting with a torch, metric measuring (i.e. cm, mm, etc.) and structural fitting p Construction, Staffing
-
Pascagoula, United States NSC Technologies Full timeThe ideal candidates for the position must have a minimum of 3 years of ship fitting experience. Must be able to demonstrate the ability to accurately perform layout, cutting with a torch, metric measuring (i.e. cm, mm, etc.) and structural fitting p Construction, Night Shift, Staffing
-
Pascagoula, United States NSC Technologies Full timeThe ideal candidates for the position must have a minimum of 3 years of ship fitting experience. Must be able to demonstrate the ability to accurately perform layout, cutting with a torch, metric measuring (i.e. cm, mm, etc.) and structural fitting p Construction, Staffing