3rd Shift Maintenance Technician

4 weeks ago

Asheboro, United States Graphic Packaging International, Inc. Full time
MAINTENANCE TECHNICIAN JOB SUMMARY: Maintain, repair, and install all machinery in the plant. They understand and align business operations and the Department as he/she executes their role to exceed customer expectations and align with GPI business, cultural, financial and operational objectives.

Primary Responsibilities are, but not limited to the following:

-Preventative maintenance
-Repairing machinery
-Machining parts
-Fabricating parts and install if needed
-Design machine parts
-Assemble parts
-Use of hand tools
-Troubleshooting (electrical, mechanical, pneumatic, hydraulic)
-Make and read prints
-Work with outside contractors on our equipment
-Building and grounds keeping
-Other duties as assigned
QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must have excellent attendance, be able to work independently and be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

MECHANICAL SKILLS:

Ability to pass the pre-employment Mechanical Assessment

EDUCATION and/or EXPERIENCE:

High school diploma or general education degree (GED); Industrial Maintenance degree or Certifications, additional knowledge in maintenance trade

LANGUAGE SKILLS:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

MATHEMATICAL SKILLS:

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY:

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

CERTIFICATES, LICENSES, REGISTRATIONS:

Industrial Maintenance Training

Company issued Fork Truck Operator's license.

ESSENTIAL JOB FUNCTIONS INCLUDE THE FOLLOWING:

WORK SCHEDULE:

Employees are required to work 8-hour (M-F) or 12-hour (2-2-3) schedules including weekends.

Occasional overtime is required to include 10 to 12 hour shifts.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to make a pushing and pulling motion when sawing with a hand saw unit; occasionally required to climb ladders, scaffolding, stairs, poles, or inclined surfaces when getting or putting away parts from stock room and when getting to shop/plant; rarely required to work above ground when measuring shaft/pulley on any upper level; frequently required to bend over equipment when cutting parts, working on machinery, or dealing with stock; frequently required to crouch and stoop when lifting material from floor to table or when measuring equipment in plant for repair; occasionally required to kneel when measuring equipment for repair or parts; occasionally required to twist and reach when installing and checking parts and equipment in machinery; occasionally required to use eye, hand, and foot coordination when grinding skiving wheels and when milling critical parts; occasionally required to use hand coordination of both hands for fine and gross manipulation, simple and firm grasping, and for wrist rotation.

The employee is continuously required to lift up to 10 pounds, frequently required to lift 10 to 50 pounds and occasionally required to lift over 50 pounds. The employee is frequently required to carry up to 25 pounds and occasionally required to carry over 50 pounds.

WORK ENVIRONMENT:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is regularly exposed to dust, heat, vibrations, toxic conditions, and potential work hazards.

The noise level in the work environment is usually loud.

Personal Protective Equipment (hearing protection, safety glasses, safety shoes, hairnet) is required. Other PPE may be required for specific tasks,

Required Experience

At Graphic Packaging International, we produce the paper cup that held your coffee this morning, the basket that transported those bottles of craft beer you enjoyed last weekend, and the microwave tray that heated your gourmet meal last night. We're one of the largest manufacturers of paperboard and paper-based packaging for some of the world's most recognized brands of food, beverage, foodservice, household, personal care and pet products. Headquartered in Atlanta, Georgia, we are collaborative, diverse, innovative individuals who create inspired packaging while giving back to our communities. With over 25,000 employees working in more than 130 locations worldwide, we strive to be environmentally responsible in our industry and in the communities where we operate. We are committed to workplace diversity and offer compensation and benefits programs that are among the industry's best to reward the talented people who make our company successful. If this sounds like something you would like to be a part of, we'd love to hear from you. Learn more about us at graphicpkg.

Inspired Packaging. A World of Difference.

Graphic Packaging is an Equal Opportunity Employer. All candidates will be evaluated on the basis of their qualifications for the job in question. We do not base our employment decision on an employee's or applicant's race, color, religion, age, gender or sex (including pregnancy), national origin, ancestry, marital status, sexual orientation, gender identity, genetic identity, genetic information, disability, veteran/military status or any other basis prohibited by local, state, or federal law. Click here to view the Poster, EEO is the Law.

  • 3rd Shift Maintenance Technician

    3 weeks ago

    Asheboro, North Carolina, United States Graphic Packaging International, Inc. Full time

    MAINTENANCE TECHNICIAN JOB SUMMARY:Maintain, repair, and install all machinery in the plant. They understand and align business operations and the Department as he/she executes their role to exceed customer expectations and align with GPI business, cultural, financial and operational objectives.Primary Responsibilities are, but not limited to the...

  • Industrial Maintenance Technician

    6 days ago

    Asheboro, North Carolina, United States Michelin Full time

    Job SummaryThe Maintenance Technician (RT) is a technical role that plans, organizes, directs, and performs electronic/electrical and mechanical maintenance to maximize production while ensuring product quality standards are met at the assigned facility. This position requires working rotating shifts in a 24-hour manufacturing operation.Key...

  • Maintenance Technician-Day Shift

    5 months ago

    Asheboro, United States Technimark LLC Full time

    Job DescriptionJob DescriptionJob Summary:Perform troubleshooting, maintenance repairs and preventive maintenance for all equipment and facilities. Assist the production supervisor as needed. Maintain the maintenance shop area in a neat and organized manner.Knowledge | Experience | Skills:High school diploma or GED. Must possess mechanical aptitude. Ability...

  • Maintenance Technician

    6 days ago

    Asheboro, North Carolina, United States Technimark Full time

    Job Summary:As a key member of the Technimark team, the Maintenance Technician - Equipment Specialist will be responsible for ensuring the optimal performance and efficiency of all equipment and facilities within the production environment. This will involve performing routine maintenance tasks, troubleshooting and repairing equipment as needed, and...

  • Grinder Operator-3rd shift

    4 months ago

    Asheboro, United States Wellmark LLC Full time

    Job DescriptionJob DescriptionJob Summary:Feed plastic parts onto conveyor and monitor flow of material to keep consistent flow going to grinder. Using forklift, retrieve plastic parts from storage and place at conveyor base. Adhere to safety practices at all times and keep work area clean.Knowledge | Experience | Skills:Must be able to work well with...

  • Oliver Rubber Maintenance Technician(RT)

    2 weeks ago

    Asheboro, United States Michelin Full time

    Oliver Rubber Maintenance Technician(RT) - Asheboro, North Carolina (NC) Michelin is hiring! - - - - - - - - - - - - Maintenance Technician (RT) -- Asheboro, NC - - - - - - - - - - - - The Maintenance Technician(RT) is a technical wage position that plans, organizes, directs, and performs electronic/electrical and mechanical maintenance to maximize...

  • Maintenance Technician

    2 weeks ago

    Asheboro, United States Technimark Full time

    Job Summary: Perform troubleshooting, maintenance repairs and preventive maintenance for all equipment and facilities. Assist the production supervisor as needed. Maintain the maintenance shop area in a neat and organized manner. Knowledge | Experience | Skills: High school diploma or GED. Must possess mechanical aptitude. Ability to learn injection molding...

  • Maintenance Technician

    3 months ago

    Asheboro, United States Technimark LLC Full time

    Job DescriptionJob DescriptionJob Summary:Perform troubleshooting, maintenance repairs and preventive maintenance for all equipment and facilities. Assist the production supervisor as needed. Maintain the maintenance shop area in a neat and organized manner.Knowledge | Experience | Skills:High school diploma or GED. Must possess mechanical aptitude. Ability...

  • Maintenance Technician

    2 weeks ago

    Asheboro, United States Technimark LLC Full time

    Job DescriptionJob DescriptionJob Summary:Perform troubleshooting, maintenance repairs and preventive maintenance for all equipment and facilities. Assist the production supervisor as needed. Maintain the maintenance shop area in a neat and organized manner.Knowledge | Experience | Skills:High school diploma or GED. Must possess mechanical aptitude. Ability...

  • 3rd Shift Die Cutting Operator

    4 weeks ago

    Asheboro, United States Graphic Packaging International, Inc. Full time

    CUTTING OPERATOR JOB SUMMARY: Prepare paperboard for cutter as needed, assist pressman on cutter as needed. They understand and align business operations and the Department as he/she executes their role to exceed customer expectations and align with GPI business, cultural, financial and operational objectives.Primary Responsibilities are, but not limited to...

  • 3rd Shift Die Cutting Operator

    3 weeks ago

    Asheboro, North Carolina, United States Graphic Packaging International, Inc. Full time

    CUTTING OPERATOR JOB SUMMARY:Prepare paperboard for cutter as needed, assist pressman on cutter as needed. They understand and align business operations and the Department as he/she executes their role to exceed customer expectations and align with GPI business, cultural, financial and operational objectives.Primary Responsibilities are, but not limited to...

  • Maintenance Technician

    2 months ago

    Asheboro, United States DS Smith Full time

    Primary/Essential Duties and Responsibilities: Mechanical Visually inspects and listens to machine and equipment to locate causes of malfunctions Dismantles equipment and remove parts for repair using hand tools, power tools chain falls, jacks, cranes, or hoist Inspects and measures parts to detect wear, misalignment, or other problems Lubricate...

  • 3rd Shift Sheeter Operator

    2 months ago

    Asheboro, North Carolina, United States Graphic Packaging International, Inc. Full time

    SHEETER OPERATOR JOB SUMMARY:Unwind roll stock and cut into sheets for printing. They understand and align business operations and the Department as he/she executes their role to exceed customer expectations and align with GPI business, cultural, financial and operational objectives.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties...

  • Maintenance Assistant

    2 weeks ago

    Asheboro, United States Alpine Health and Rehabilitation of Asheboro Full time

    Job DescriptionJob DescriptionMaintenance TechnicianDepartment: Physical PlantFLSA: Hourly Non-Exempt Generally Reports to: Maint. SupervisorThe following statements are intended to describe the general nature and level of work being performed and are not intended to be a complete list of all responsibilities, duties and skills required.SUMMARYAssists in the...

  • Equipment Maintenance Specialist

    2 weeks ago

    Asheboro, North Carolina, United States Cindavi Full time

    Job Overview: As an Equipment Maintenance Specialist at Cindavi, you will play a crucial role in ensuring the seamless operation of our machinery and equipment. Your primary focus will be on preventive maintenance, troubleshooting, and repairs to enhance productivity and minimize operational interruptions. This position requires a solid technical foundation,...

  • HVAC Service Technician

    2 weeks ago

    Asheboro, North Carolina, United States Savas and Sons Full time

    Job OverviewWe are seeking a skilled HVAC Technician with extensive experience in the field. Your primary responsibilities will include the installation, maintenance, and repair of heating and cooling systems.Key Responsibilities:Install new heating, ventilation, and air conditioning systemsConduct inspections and perform necessary repairs and replacements...

  • Tanker Loader/Maintenance Technician

    2 months ago

    Asheboro, United States Wellmark LLC Full time

    Job DescriptionJob DescriptionJob Summary: Feed thermoplastic materials from silos and bulk railcar to tanker. Climb and mount stationary and secure tanker truck. Operate silo hose equipped with front mounted clamp to lift & transport thermoplastic reprocessed or reground materials from storage silo to tanker truck. Keep equipment clean and in safe working...

  • Mold Maintenance Technician

    1 week ago

    Asheboro, North Carolina, United States Westfall Technik Inc Full time

    Career Opportunities with Westfall TechnikA great place to work.Current Job OpeningsExplore our available positions as they arise.Position OverviewThe Toolmaker is responsible for the repair and upkeep of high-volume plastic injection multi-cavity mold tools. This role involves the disassembly and thorough cleaning of complex molds, which can weigh thousands...

  • Generator Field Technician

    4 weeks ago

    Asheboro, United States D2B Groups Full time

    Job DescriptionJob DescriptionWe are currently hiring for the position of Generator Technician. As a Generator Technician, you will be responsible for installing, maintaining, and repairing generators and their related systems. Working with a variety of generator models and sizes, you will ensure their optimal performance and reliability.Your key...

  • Agricultural Equipment Technician

    1 week ago

    Asheboro, North Carolina, United States Gpac Full time

    We are collaborating with a prominent agricultural enterprise seeking a skilled Agricultural Technician. This extensive specialty crop operation requires a technician to handle a variety of maintenance tasks, repairs, and field operations. If you have a background in agricultural machinery and are contemplating a career transition, this opportunity may be...