CNC Repair Technician
Found in: Appcast US C2 - 2 weeks ago
JOB SUMMARY:
This position is responsible for performing highly diversified and highly skilled duties to repair and maintain machinery, equipment, maintenance, building and facilities. The position uses experience and extensive knowledge to complete work orders with use of skilled maintenance techniques including mechanical repair, plumbing, welding, heating, air conditioning, knowledge of CNC mechanical / electrical repair.
KEY RESPONSIBILITIES:
- Perform complex mechanic skills including, but not limited to, troubleshooting and repair of mechanical, electrical, pneumatic, hydraulic, cranes, and welding equipment. Read and interprets mechanical / electrical equipment manuals to diagnose, adjust, and/or repair, machine malfunctions and operating difficulties during emergency and unscheduled down-time
- Rebuild complicated machines, components and attachments, to involve dismantling, inspection, machining or replacement of purchased parts
- Perform advanced mechanic activities relative to the installation and relocation of existing machines and equipment, including disconnection and reconnection, dismantling and erecting, leveling, fitting and aligning operations
- Perform all segments of maintenance on the building, facilities, and the grounds
- Perform preventive maintenance on CNC machine, production and all facilities equipment
- Perform preventive maintenance on heating, ventilating, and air conditioning units
- Maintain required maintenance logs and files
- Submit purchasing requests for additional parts and service
- Assist Supervisor in determining the nature and scope of projects and the requirements for completion
- May direct work and assist in training of less experienced maintenance staff
- Follow all clean up and housekeeping procedures
- Comply with all quality, safety and sanitation regulations
- Work safely and follow Toshiba’s Safety Policy.
- Complete other tasks as assigned by Supervisor
Tools/Equipment
- Hand and power tools, machine tools, new equipment use as required
- Forklift or scissor lift use required
- Limited computer and basic office equipment use
SKILLS AND EXPERIENCE:
- Requires one to three years of trades training and three to five years of progressively responsible related experience, or eight to ten years of progressively responsible related experience
- Expert mechanical aptitude and experience with ability to perform complex troubleshooting and rebuilds
- Must be certifiable for Fork Truck operation
- Must be able to work at altitudes of 100ft. maximum
- Must be trainable to operate a boom lift and scissor lift
- Must have the ability to work independently
- Ability to train and direct others
EDUCATION AND TRAINING:
- Skilled trades training in a related field preferred
-
CNC Maintenance Technician
Found in: Jooble US O C2 - 3 weeks ago
Milwaukee, WI, United States Saelens Corporation Full timeDescription: CNC Maintenance Technician 2nd or 3rd shift opportunities $25 to $35 per hour Our state of the art machine shop is seeking a skilled CNC Maintenance Technician to join our team. The ideal candidate will have experience in machine repair of vertical and horizontal mill and lathes. Perform routine maintenance on CNC machines to ensure optimal...
-
CNC Maintenance Technician
Found in: beBee jobs US - 2 weeks ago
Milwaukee, Wisconsin, United States Saelens Corporation Full timeDescription:CNC Maintenance Technician2nd or 3rd shift opportunities$25 to $35 per hourOur state of the art machine shop is seeking a skilled CNC Maintenance Technician to join our team. The ideal candidate will have experience in machine repair of vertical and horizontal mill and lathes. Responsibilities:Perform routine maintenance on CNC machines to ensure...
-
CNC Machinist
3 weeks ago
Milwaukee, United States Snap-on Inc Full timeOverview2nd shift opening: 2:00pm - 10:00pm $24.33/hourIf you are mechanically inclined and enjoy hands-on work and troubleshooting, this could be your ideal job!We are looking for a person with CNC or manual machining experience with a strong mechanical/machining ability to set-up, run and troubleshoot machines. Responsibilities• Responsible for complete...
-
CNC Machinist
2 weeks ago
Milwaukee, United States Snap-on Inc Full timeOverview3rd shift opening: 10:00pm - 6:00am $24.33/hourIf you are mechanically inclined and enjoy hands-on work and troubleshooting, this could be your ideal job!We are looking for a person with CNC or manual machining experience with a strong mechanical/machining ability to set-up, run and troubleshoot machines. Responsibilities• Responsible for complete...
-
CNC Machinist
2 weeks ago
Milwaukee, United States BuildSubmarines.com Full timeOverview 3rd shift opening: 10:00pm - 6:00am $24.33/hour If you are mechanically inclined and enjoy hands-on work and troubleshooting, this could be your ideal job! We are looking for a person with CNC or manual machining experience with a strong mechanical/machining ability to set-up, run and troubleshoot machines. Responsibilities • Responsible for...
-
Electrician Maintenance CNC/PLC
3 days ago
Milwaukee, United States Caterpillar Full timeCareer Area:OperationsJob Description:Your Work Shapes the World at Caterpillar Inc.When you join Caterpillar, you're joining a global team who cares not just about the work we do – but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about...
-
Field Service Engineer
2 weeks ago
Milwaukee, United States Swift Placement & Consulting Full timeJob DescriptionJob DescriptionLooking for multiple positions in several areas:Areas of interest for candidate location:California market ( prefer surrounding areas such as Reno, Las Vegas, Oregon, etc. but would not skip out on CA residents)San Antonio/Houston, TX areaRaleigh, NC or general Carolinas areaHuntsville/Birmingham, AL / Columbus, MSPeoria,...
-
Field Service Engineer
2 weeks ago
Milwaukee, United States Swift Placement & Consulting Full timeJob DescriptionJob DescriptionLooking for multiple positions in several areas:Areas of interest for candidate location:California market ( prefer surrounding areas such as Reno, Las Vegas, Oregon, etc. but would not skip out on CA residents)San Antonio/Houston, TX areaRaleigh, NC or general Carolinas areaHuntsville/Birmingham, AL / Columbus, MSPeoria,...
-
CNC Machinist
Found in: beBee S US - 3 weeks ago
Milwaukee, United States Snap-on Inc Full timeOverview3rd shift opening: 10:00pm - 6:00am $24.33/hourIf you are mechanically inclined and enjoy hands-on work and troubleshooting, this could be your ideal job!We are looking for a person with CNC or manual machining experience with a strong mechanical/machining ability to set-up, run and troubleshoot machines. Responsibilities• Responsible for complete...
-
Industrial Maintenance Tech
4 days ago
Milwaukee, United States Celerity Staffing Solutions Full timeJob DescriptionJob DescriptionMaintenance Technician2nd Shift(North side of Milwaukee)Pay depends on experienceResponsibilities include; all electrical repair and maintenance for CNC equipment, install machines, tooling, troubleshoot equipment/situations, fabrication, training employees on PM, support improvements/recommendations and...
-
Industrial Maintenance Tech
4 days ago
Milwaukee, United States Celerity Staffing Solutions Full timeJob DescriptionJob DescriptionMaintenance Technician2nd Shift(North side of Milwaukee)Pay ranging $25 to $35 an hour based on experienceResponsibilities include; all electrical repair and maintenance for CNC equipment, install machines, tooling, troubleshoot equipment/situations, fabrication, training employees on PM, support improvements/recommendations and...
-
Industrial Maintenance Tech
1 day ago
Milwaukee, United States Celerity Staffing Solutions Full timeJob DescriptionJob DescriptionMaintenance Technician2nd Shift(North side of Milwaukee)Pay ranging $25 to $35 an hour based on experienceResponsibilities include; all electrical repair and maintenance for CNC equipment, install machines, tooling, troubleshoot equipment/situations, fabrication, training employees on PM, support improvements/recommendations and...
-
Engineering Technician
Found in: beBee jobs US - 3 weeks ago
Milwaukee, Wisconsin, United States Saelens Corporation Full timeDescription:Engineering Technician - CNC Setup Operator1st shift$28 - $35 per hour based off skill level and shiftWe are currently looking for a skilled and detail-oriented Manufacturing Engineering Technician or CNC Setup Operator to join our growing team. If you have hands-on experience in manufacturing processes, CNC machine setup, and a strong technical...
-
Engineering Technician
Found in: beBee jobs US - 2 weeks ago
Milwaukee, Wisconsin, United States Saelens Corporation Full timeDescription:Engineering Technician - CNC Setup Operator1st or 2nd shift$28 - $35 per hour based off skill level and shiftWe are currently looking for a skilled and detail-oriented Manufacturing Engineering Technician or CNC Setup Operator to join our growing team. If you have hands-on experience in manufacturing processes, CNC machine setup, and a strong...
-
Commercial Refrigeration Repair Technician
5 days ago
Milwaukee, United States HR Consult Works Full time $30 - $40Commercial Refrigerator Repair TechnicianOur client based out of New Berlin WI is looking for an experienced Commercial Refrigeration Technician to become a key member of their family-oriented team.Position is full time Monday to Friday working 7am to 5pm. OT during the week is a must along with occasional call duties.Responsibilities:Install, service, and...
-
CNC Machinist
Found in: Resume Library US A2 - 2 weeks ago
Milwaukee, Wisconsin, United States Snap-on Inc Full timeOverview: 3rd shift opening: 10:00pm - 6:00am $24.33/hour If you are mechanically inclined and enjoy hands-on work and troubleshooting, this could be your ideal job! We are looking for a person with CNC or manual machining experience with a strong mechanical/machining ability to set-up, run and troubleshoot machines. Responsibilities: • ...
-
CNC Machinist
Found in: Resume Library US A2 - 2 weeks ago
Milwaukee, Wisconsin, United States Snap-on Inc Full timeOverview: 2nd shift opening: 2:00pm - 10:00pm $24.33/hour If you are mechanically inclined and enjoy hands-on work and troubleshooting, this could be your ideal job! We are looking for a person with CNC or manual machining experience with a strong mechanical/machining ability to set-up, run and troubleshoot machines. Responsibilities: • ...
-
Machine Repair
3 days ago
Milwaukee, United States Caterpillar Full timeCareer Area:OperationsJob Description:Your Work Shapes the World at Caterpillar Inc.When you join Caterpillar, you're joining a global team who cares not just about the work we do – but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about...
-
Electrician Maintenance CNC/PLC
Found in: Careerbuilder One Red US C2 - 2 days ago
South Milwaukee, United States Caterpillar Inc. Full timeCareer Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do – but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities....
-
Engineering Technician
Found in: Jooble US O C2 - 2 days ago
Milwaukee, WI, United States Saelens Corporation Full timeDescription: Engineering Technician - CNC Setup Operator 1st or 2nd shift $28 - $35 per hour based off skill level and shift We are currently looking for a skilled and detail-oriented Manufacturing Engineering Technician or CNC Setup Operator to join our growing team. If you have hands-on experience in manufacturing processes, CNC machine setup, and a...