Hardware Engineer

4 weeks ago

Andover, United States Engtal Full time

My client is the world’s leading manufacturer of commercial plumbing systems and has been in operation since 1906. We are at the forefront of the green building movement and provide sustainable restroom solutions. We manufacture water-efficient products including flush valves, electronic faucets, soap dispensing and sink systems along with vitreous china fixtures for commercial, industrial and institutional markets worldwide.

The Electronic Hardware Engineer II is responsible for the design, development, and implementation of electronic products hardware design. Create and maintain product documents. Evaluate and upgrade existing electronics hardware design. Create test protocols. Perform worst case and failure analysis. Create and execute engineering change orders. Generate engineering report. Guide the work of technicians.


Job Duties And Responsibilities

  • Design, develop, and implement board level design, simulation, and optimization of front end circuitry, schematics capture, PCB layout and component evaluation.
  • Create hardware design description and block diagram as required.
  • Use a combination of logic, experience, analysis and methodologies to make solid, timely decisions and solve problems. Including but not limited to worst case analysis and DFMEAs
  • Plans and create effective test protocols to verify and validate engineering designs to product requirements
  • Produce detailed engineering reports
  • Produce component level test for new and existing products
  • Design necessary verification firmware routine for peripheral function testes
  • Process and execute ECNs
  • Follow established document control procedures
  • Work with internal and external resources on design optimization
  • Support advance research
  • Guide the work of technicians
  • Other duties and responsibilities as required.


Qualifications

  • Bachelor's Degree in Electrical or Computer engineering
  • 2+ Years relative experience
  • Capable of designing small embedded system hardware
  • Experience developing PCB
  • Experience using ICE tools in debugging peripheral driver
  • Experience with circuit simulation
  • Experience with capture schematics
  • Experience with ECAD software
  • Strong experience using lab equipment (Oscilloscope, function generator) and setting up test stand and prototyping
  • Strong oral communication skills
  • Working knowledge and growing expertise in embedded sensor development


We offer a highly competitive compensation and benefits package, including:

  • A choice of Medical (with Health Savings Account), Dental, Vision, Rx Insurance for employees and their eligible dependents
  • Company paid Basic Life and AD & D Insurance, Basic Accident Insurance, Disability Insurance, Employee Assistance Program, and Well-being Programs.
  • Paid time off, Paid Sick Leave, Paid Vacation time, Paid Sick time, Paid Military Leave, and Paid Volunteer time away from work.
  • Dependent Care Flexible Spending Account, Commuter Parking and Transit Accounts, and Tuition Reimbursement benefits.
  • 401(k) Retirement Savings Plan with a Company match.
  • Employee Service Anniversary Awards and Employee Recognition Programs

  • Hardware Quality Engineer

    3 days ago

    Andover, United States Raytheon Technologies Corporation Full time

    We are seeking a Hardware Quality Engineer with hands-on hardware quality experience to become a key part of Sensors Operations Quality organization. Here at Raytheon, our Operations Quality Team assures product and process quality with an emphasis o Quality Engineer, Hardware, Quality, Engineer, Operations, Technology, Security

  • Sr Operations Quality Engineer

    5 hours ago

    Andover, United States Raytheon Technologies Corporation Full time

    We are seeking a Senior Hardware Quality Engineer with hands-on hardware quality experience to become a key part of Operations Quality Advanced Electronic Assembly Team. Here at Raytheon, our Operations Quality Team assures product and process qual Quality Engineer, Operations, Quality, Engineer, Operation, Security, Technology

  • Senior C++ Software Engineer with Cloud

    5 days ago

    Andover, United States Motion Recruitment Full time

    Our client is looking to bring on a senior software engineer who has expertise in C++, and AWS. This would be a hybrid contract-to-hire role located in Andover, Massachusetts. Are you passionate about robotics, software development, and cutting-edge technologies? Join their team at a leading robotics consulting firm based in Andover, Massachusetts. ...

  • Senior Manager System Engineering

    2 weeks ago

    Andover, United States JCW Group Full time

    JCW is working on an exciting search for a Senior Manager System Engineer for a global medical device company out of Andover, MA. This role would be 3 days onsite. The ideal candidate will be coming from a medical device regulated background with strong hardware and firmware systems knowledge. This role will be leading a team and requires prior managerial...

  • Senior Manager System Engineering

    2 weeks ago

    Andover, United States JCW Group Full time

    JCW is working on an exciting search for a Senior Manager System Engineer for a global medical device company out of Andover, MA. This role would be 3 days onsite. The ideal candidate will be coming from a medical device regulated background with strong hardware and firmware systems knowledge. This role will be leading a team and requires prior managerial...

  • Senior Manager System Engineering

    2 weeks ago

    Andover, United States JCW Group Full time

    JCW is working on an exciting search for a Senior Manager System Engineer for a global medical device company out of Andover, MA. This role would be 3 days onsite. The ideal candidate will be coming from a medical device regulated background with strong hardware and firmware systems knowledge. This role will be leading a team and requires prior managerial...

  • Silicon Systems Engineer

    3 weeks ago

    Andover, United States Vicor Corporation Full time

    Job Summary Vicor Product Development Engineering is hiring a motivated individual to define, develop, validate and bring to production the latest in silicon power controllers and other ICs for cutting edge power conversion products.  We are seeking an individual with creativity, talent, experience and a drive for success in a collaborative work...

  • Mechanical Engineer

    7 days ago

    Andover, United States Advanced Clinical Full time

    Mechanical Engineer (Control Systems) *Ideal candidate will have experience with Fluidics and/or Pneumatics within a Medical Device company. *Matlab or comparable experience The Mechanical Engineer, Control Systems will be responsible for MATLAB development for pneumatics systems. Works on the design and development of the control systems embedded in the...

  • Mechanical Engineer

    1 week ago

    Andover, United States Advanced Clinical Full time

    Mechanical Engineer (Control Systems)*Ideal candidate will have experience with Fluidics and/or Pneumatics within a Medical Device company.*Matlab or comparable experienceThe Mechanical Engineer, Control Systems will be responsible for MATLAB development for pneumatics systems. Works on the design and development of the control systems embedded in the...

  • Mechanical Engineer

    2 weeks ago

    Andover, United States Advanced Clinical Full time

    Mechanical Engineer (Control Systems)*Ideal candidate will have experience with Fluidics and/or Pneumatics within a Medical Device company.*Matlab or comparable experienceThe Mechanical Engineer, Control Systems will be responsible for MATLAB development for pneumatics systems. Works on the design and development of the control systems embedded in the...

  • Mechanical Engineer

    2 weeks ago

    Andover, United States Advanced Clinical Full time

    Mechanical Engineer (Control Systems)*Ideal candidate will have experience with Fluidics and/or Pneumatics within a Medical Device company.*Matlab or comparable experienceThe Mechanical Engineer, Control Systems will be responsible for MATLAB development for pneumatics systems. Works on the design and development of the control systems embedded in the...

  • Mechanical Engineer

    6 days ago

    Andover, United States Advanced Clinical Full time

    Mechanical Engineer (Control Systems)*Ideal candidate will have experience with CFD (Computational Fluid Dynamics), Fluidics and/or Pneumatics within a Medical Device company.*Matlab or comparable experienceThe Mechanical Engineer, Control Systems will be responsible for MATLAB development for pneumatics systems. Works on the design and development of the...

  • Mechanical Engineer

    6 days ago

    Andover, United States Advanced Clinical Full time

    Mechanical Engineer (Control Systems)*Ideal candidate will have experience with CFD (Computational Fluid Dynamics), Fluidics and/or Pneumatics within a Medical Device company.*Matlab or comparable experienceThe Mechanical Engineer, Control Systems will be responsible for MATLAB development for pneumatics systems. Works on the design and development of the...

  • Mechanical Engineer

    5 days ago

    Andover, United States Advanced Clinical Full time

    Mechanical Engineer (Control Systems) *Ideal candidate will have experience with CFD (Computational Fluid Dynamics), Fluidics and/or Pneumatics within a Medical Device company. *Matlab or comparable experience The Mechanical Engineer, Control Systems will be responsible for MATLAB development for pneumatics systems. Works on the design and development of the...

  • Mechanical Engineer

    6 days ago

    Andover, United States Advanced Clinical Full time

    Mechanical Engineer (Control Systems)*Ideal candidate will have experience with CFD (Computational Fluid Dynamics), Fluidics and/or Pneumatics within a Medical Device company.*Matlab or comparable experienceThe Mechanical Engineer, Control Systems will be responsible for MATLAB development for pneumatics systems. Works on the design and development of the...

  • Sr Embedded Firmware Engineer

    1 week ago

    Andover, United States Vicor Corp. Full time

    Job SummaryJob Description Senior Firmware Engineer (Vicor Corporation; Andover, MA): The Sr. Firmware Engineer is responsible for developing high quality firmware in C for new and existing designs; hands-on hardware experience, system debugging and code enhancement and optimization; ensuring the use of formal development methods, implementation of...

  • Senior Manufacturing Engineer

    6 days ago

    Andover, United States Katalyst HealthCares & Life Sciences Full time

    Job Description : Contract Senior Manufacturing Engineer Reports to: Manufacturing Engineering Manager Department of Manufacturing Engineering focuses on manufacturing at our headquarters in Andover Massachusetts. The team works on developing, maintaining, and improving manufacturing processes to support our initiative to deliver the highest quality...

  • Senior Firmware Engineer

    3 weeks ago

    Andover, United States Centura, Inc Full time

    Job DescriptionJob DescriptionPerform embedded software/firmware development and validation in the area of Power Management – Buck Regulators and Motor Control as examplesDevelopment of software architecture and design documentation for real time embedded applicationConduct and participate in peer review of software designs, code and test...

  • Senior Manufacturing Engineer

    1 week ago

    Andover, United States TransMedics Full time

    JOB DESCRIPTION Position: Senior Manufacturing Engineer Reports to: Manufacturing Engineering Manager DEPARTMENT OF MANUFACTURING ENGINEERING focuses on manufacturing of the Organ Care System at our headquarters in Andover Massachusetts. The team works on developing, mainaining, and improving manufacturing processes to support our initiavive to deliver the...

  • Jr. Field Service Electrical/Mechanical Engineer position

    4 weeks ago

    Andover, United States TOP Group - Japanese Recruiting Agency Full time

    A Japanese machinery manufacturing company is looking for an entry-level electrical service engineer in Andover, MA. 1-2 years of experience in engineering is preferred. Bilingual skills in Japanese, Chinese or Spanish are huge plus for this position. The similar positions are also available nationwide.Title: Customer EngineerSalary: 55-65K Base +...