Calibration Technician C

23 hours ago

Sterling, United States SIMCO Electronics Full time

Position Overview

Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. Calibration Technician will identify and utilize appropriate manual and automated measurement procedures.


This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. Calibration Technician may be asked to report opinions and interpretations.


Responsibilities and Duties

  • Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications
  • Working with a range of RF-enabled devices including cell phone antennas, amplifiers, two-way radios, satellite systems, and internet access points.
  • Troubleshooting circuits used in RF transmission independently and with site engineers.
  • Identifying and repairing faults in finished assemblies making adjustments as required.
  • Identifying the causes of faults and work with on-site teams to implement preventative measures so that they do not happen again.
  • Model creation, assembly, tuning, and plan development as well as modifying antenna prototypes, parts, and assemblies.
  • Maintaining documentation of test cases.
  • Performing routine antenna capability tests.
  • Maintain primary and/or intrinsic calibration standards
  • Maintain secondary and/or working calibration standards
  • Perform maintenance, troubleshooting and repair of precision equipment
  • Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements
  • Collect, compile, measure, summarize, and record data gathered during calibration.
  • Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc
  • Identify and correct measurement errors, as applicable
  • Prepare calibration reports and certificates
  • Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used
  • Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes
  • Train subordinates in calibration concepts and procedures
  • Interact with other technicians, Customer Service Representatives, Account Managers, and customers
  • Other duties and responsibilities as may be assigned


Qualifications

  • Minimum High School diploma or equivalent
  • Must be able to perform general math and algebra functions
  • Understanding of Basic Statistics
  • Must possess good written and oral, communication skills
  • Technical writing ability
  • Intermediate ability to troubleshoot repair, align and optimize precision equipment
  • Intermediate computer skills
  • Proficient in use of MS Word and Excel
  • Minimum three years of calibration experience some of which can be offset with formal metrology training
  • Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540)
  • Must have great interpersonal and customer service skills
  • Strong attention to details
  • Must be a self-motivator, work as a team player, and follow written procedures

Physical Demands

  • Must be able to lift up to 45 pounds without assistance
  • Occasional standing and bending are required

Working Environment

Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites

Travel may be required to other domestic and possibly international locations


What We Offer

  • Full - Time, non-exempt position
  • Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement
  • Vacation, sick and paid holidays


SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.

  • Calibration Technician C

    23 hours ago

    Sterling, United States Simco Electronics Full time

    Job DescriptionJob DescriptionPosition OverviewCalibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines...

  • Repair Technician

    1 day ago

    Sterling, United States Simco Electronics Full time

    Job DescriptionJob Description*$3K SIGN ON BONUS!*Position Overview:The Repair Technician will apply knowledge of measurement science, mathematics, physics and electronics to perform calibration and repair of test measurement and diagnostic equipment used in the Life Science, RF/Telecommunications, and Semiconductor/Electronic Components markets. This...

  • Electro Mechanical Technician

    1 day ago

    Sterling, United States SIMCO Electronics Full time

    Position Overview:The Repair Technician will apply knowledge of measurement science, mathematics, physics and electronics to perform calibration and repair of test measurement and diagnostic equipment used in the Life Science, RF/Telecommunications, and Semiconductor/Electronic Components markets. This position will normally receive general instructions on...

  • Electro Mechanical Technician

    23 hours ago

    Sterling, United States SIMCO Electronics Full time

    Position Overview:The Repair Technician will apply knowledge of measurement science, mathematics, physics and electronics to perform calibration and repair of test measurement and diagnostic equipment used in the Life Science, RF/Telecommunications, and Semiconductor/Electronic Components markets. This position will normally receive general instructions on...

  • Precision Equipment Technician

    5 days ago

    Sterling, Virginia, United States Simco Electronics Full time

    Job DescriptionThe Radio Frequency Technician will be responsible for calibrating inspection, measurement, and test equipment (IM&TE) in various disciplines, including Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency.

  • Test Measurement Technician

    4 days ago

    Sterling, Virginia, United States Simco Electronics Full time

    About the JobWe are seeking a highly skilled Repair Technician to join our team at Simco Electronics. As a member of our team, you will be responsible for calibrating and repairing complex test measurement equipment, ensuring it meets our high standards.Your primary responsibilities will include:Evaluating and testing systems to identify areas for...

  • Maintenance Technician

    4 days ago

    Sterling, United States KETTLER Full time

    Overview K E T T L E R currently has an opening for a Maintenance Technician at Cascades Overlook, located in Sterling, V A. If you have a good work ethic, a passion for helping people, and want an opportunity to learn and grow, K E T T L E R is the place for you. The Maintenance Technician, under the direction of the Maintenance Manager, is...

  • Maintenance technician

    3 days ago

    Sterling, United States Kettler Full time

    Overview K E T T L E R currently has an opening for a Maintenance Technician at Cascades Overlook, located in Sterling, V A. If you have a good work ethic, a passion for helping people, and want an opportunity to learn and grow, K E T T L E R is the place for you. The Maintenance Technician, under the direction of the Maintenance Manager, is responsible for...

  • Test Equipment Technician

    6 days ago

    Sterling Heights, Michigan, United States SIMCO Electronics Full time

    Job DescriptionAs a Test Equipment Technician at SIMCO Electronics, you will play a critical role in ensuring the accuracy and reliability of our products. You will be responsible for testing and calibrating inspection, measurement, and test equipment (IM&TE) in various disciplines, including Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave,...

  • Maintenance Technician

    4 days ago

    Sterling, PA, United States KETTLER Full time

    Overview K E T T L E R currently has an opening for a Maintenance Technician at Cascades Overlook, located in Sterling, V A. If you have a good work ethic, a passion for helping people, and want an opportunity to learn and grow, K E T T L E R is the place for you. The Maintenance Technician, under the direction of the Maintenance Manager, is...

  • Maintenance Technician

    4 days ago

    Sterling, PA, United States KETTLER Full time

    Overview K E T T L E R currently has an opening for a Maintenance Technician at Cascades Overlook, located in Sterling, V A. If you have a good work ethic, a passion for helping people, and want an opportunity to learn and grow, K E T T L E R is the place for you. The Maintenance Technician, under the direction of the Maintenance Manager, is...

  • Commissioning Technician

    1 day ago

    Sterling, United States Vertical Mechanical Group Inc Full time

    Job Posting: Commissioning Technician Location: Sterling, VA Company: Vertical Mechanical Group (VMG) At Vertical Mechanical Group (VMG), we are always seeking talented individuals to join our growing team. Our commitment to exceptional customer service and innovative solutions drives our success and fuels continuous expansion. We're excited to offer...

  • Mechanical Systems Technician

    4 days ago

    Sterling, Virginia, United States Vertical Mechanical Group Inc Full time

    Job DescriptionWe're seeking a skilled Controls Technician to join our team. This role is critical in ensuring the successful installation, maintenance, and troubleshooting of control automation systems for HVAC equipment in commercial and residential environments.The ideal candidate will have a strong understanding of HVAC and control systems, including...

  • HEAVY EQUIPMENT SHOP TECHNICIAN

    15 hours ago

    Sterling, United States Carter Machinery Company, Inc Full time

    We are currently offering a $1,500 sign-on bonus for Heavy Equipment Shop Technician new hires, payable after 90-days of employment. Carter Machinery Company, the authorized Caterpillar dealer serving Virginia, West Virginia, Maryland, Delaware and Washington D.C. is hiring a Heavy Equipment Shop Technician in Dulles, Virginia. The Heavy Equipment Shop...

  • Electronics Repair Specialist

    4 days ago

    Sterling, Virginia, United States Simco Electronics Full time

    Job DescriptionThe role of a Repair Technician at Simco Electronics involves applying advanced technical knowledge to calibrate and repair complex test measurement equipment. This includes evaluating, testing, and troubleshooting systems to the component level, as well as performing laboratory and work area housekeeping.Responsibilities include:Evaluating...

  • Heavy Equipment Technician

    2 days ago

    Sterling Heights, Michigan, United States Carter Machinery Company, Inc Full time

    We are seeking a skilled Heavy Equipment Technician to join our team at Carter Machinery Company, Inc. in Dulles, Virginia.The ideal candidate will have a strong background in diagnosing and repairing heavy construction equipment and work tools in a shop environment.About the RoleDiagnose and repair equipment and components in a fast-paced shop...

  • Electrical Lead

    1 week ago

    Sterling, Colorado, United States Clean Harbors Full time

    Company OverviewClean Harbors is a world-class environmental service organization and market leader in industrial hazardous waste management, parts-cleaning technology, and oil re-refining. We generate more than $1.2 billion in annual revenue and have a strong commitment to excellence deeply rooted in a sense of tradition.Salary and BenefitsThe salary for...

  • Tactical Vehicle Technician

    18 hours ago

    Sterling Heights, United States DCS Corp Full time

    Job DescriptionJob DescriptionPerform as an electronics technician: fabricating, installing, and troubleshooting vehicle platform systems. This is an opportunity to join the fast-paced world of DCS's team at the Ground Vehicle Systems Center group located in Warren, MI. Essential Job Functions:Install, and subsequently troubleshoot, sub-systems into...

  • Tactical Vehicle Technician

    15 hours ago

    Sterling Heights, United States DCS Corp Full time

    Perform as an electronics technician: fabricating, installing, and troubleshooting vehicle platform systems. This is an opportunity to join the fast-paced world of DCS's team at the Ground Vehicle Systems Center group located in Warren, MI. Essential Job Functions: Install, and subsequently troubleshoot, sub-systems into various vehicle platforms. Test and...

  • Tactical Vehicle Technician with Security Clearance

    2 days ago

    Sterling Heights, United States DCS Corporation Full time

    Perform as an electronics technician: fabricating, installing, and troubleshooting vehicle platform systems. This is an opportunity to join the fast-paced world of DCS's team at the Ground Vehicle Systems Center group located in Warren, MI. Essential Job Functions: Install, and subsequently troubleshoot, sub-systems into various vehicle platforms. Test and...