Calibration Technician B
1 month ago
Position Overview
*This position is located in Panorama City*
The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician B will identify and utilize appropriate manual and automated measurement procedures.
This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician B will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician B may be asked to report opinions and interpretations.
Responsibilities and Duties
- Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications
- Maintain primary and/or intrinsic calibration standards
- Maintain secondary and/or working calibration standards
- Perform maintenance, troubleshooting and repair of precision equipment
- Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements
- Collect, compile, measure, summarize, and record data gathered during calibration.
- Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc
- Identify and correct measurement errors, as applicable
- Prepare calibration reports and certificates
- Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used
- Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes
- Train subordinates in calibration concepts and procedures
- Interact with other technicians, Customer Service Representatives, Account Managers, and customers
- Other duties and responsibilities as may be assigned
Qualifications
- Minimum High School diploma or equivalent
- Must be able to perform general math and algebra functions
- Understanding of Basic Statistics
- Must possess good written and oral, communication skills
- Technical writing ability
- Intermediate ability to troubleshoot repair, align and optimize precision equipment
- Intermediate computer skills
- Proficient in use of MS Word and Excel
- Minimum three years of calibration experience some of which can be offset with formal metrology training
- Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540)
- Must have great interpersonal and customer service skills
- Strong attention to details
- Must be a self-motivator, work as a team player, and follow written procedures
Physical Demands
- Must be able to lift up to 45 pounds without assistance
- Occasional standing and bending are required
Working Environment
Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites
Travel may be required to other domestic and possibly international locations
What We Offer
- Full - Time, non-exempt position
- Excellent benefits package includes medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health and tuition reimbursement
- Vacation, sick and paid holidays
SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.
-
Calibration Technician B
3 weeks ago
San Fernando, CA, United States SIMCO Electronics Full timePosition Overview*This position is located in Panorama City*The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time &...
-
Calibration Technician B
2 months ago
San Francisco, United States Simco Electronics Full timeJob DescriptionJob DescriptionPosition OverviewThe Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency...
-
Calibration Lab Manager
2 weeks ago
san diego, United States PEAK Technical Staffing USA Full timeJob Summary:The Calibration Lab Manager oversees all operations within the calibration laboratory, ensuring the accuracy, reliability, and compliance of test equipment used across diverse industries.This role is responsible for managing a team of technicians, coordinating equipment calibration schedules, maintaining quality standards, and ensuring all...
-
Calibration Technician
1 month ago
San Diego, United States Manpower San Diego Full timePrincipal Duties & Responsibilities • Perform Measure & Test Equipment (M&TE) calibration at a mid-level capacity at San Diego lab location. Provide a focal point for the coordination of M&TE calibration. Top 5 Skills 1. Test equipment knowledge 2. Perform Measure & Test Equipment (M&TE) calibration at a mid-level capacity 3. Power supply calibration (up...
-
Calibration Technician
3 weeks ago
san diego, United States Manpower San Diego Full timePrincipal Duties & Responsibilities • Perform Measure & Test Equipment (M&TE) calibration at a mid-level capacity at San Diego lab location. Provide a focal point for the coordination of M&TE calibration. Top 5 Skills 1. Test equipment knowledge 2. Perform Measure & Test Equipment (M&TE) calibration at a mid-level capacity 3. Power supply calibration (up...
-
Calibration Technician
1 month ago
san diego, United States Manpower San Diego Full timePrincipal Duties & Responsibilities • Perform Measure & Test Equipment (M&TE) calibration at a mid-level capacity at San Diego lab location. Provide a focal point for the coordination of M&TE calibration. Top 5 Skills 1. Test equipment knowledge 2. Perform Measure & Test Equipment (M&TE) calibration at a mid-level capacity 3. Power supply calibration (up...
-
Radio Frequency Technician
1 month ago
San Fernando, United States SIMCO Electronics Full timePosition Overview*This position is located in Panorama City*The Radio Frequency Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics,...
-
Radio Frequency Technician
1 month ago
San Fernando, United States SIMCO Electronics Full timePosition Overview*This position is located in Panorama City*The Radio Frequency Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics,...
-
Calibration Specialist
1 month ago
San Mateo, California, United States Government Jobs Full timeCalibration Technician OpportunityGovernment Jobs is seeking a skilled Calibration Technician to join our team in the Public Works Department. The successful candidate will be responsible for the operation and maintenance of the City's wastewater treatment plant, ensuring compliance with environmental regulations and providing a safe and healthy environment...
-
Calibration Lab Manager
2 weeks ago
San Diego, United States PEAK Technical Staffing USA Full timeJob Summary:The Calibration Lab Manager oversees all operations within the calibration laboratory, ensuring the accuracy, reliability, and compliance of test equipment used across diverse industries.This role is responsible for managing a team of technicians, coordinating equipment calibration schedules, maintaining quality standards, and ensuring all...
-
Calibration Lab Manager
3 weeks ago
San Diego, CA, United States PEAK Technical Staffing USA Full timeJob Summary:The Calibration Lab Manager oversees all operations within the calibration laboratory, ensuring the accuracy, reliability, and compliance of test equipment used across diverse industries.This role is responsible for managing a team of technicians, coordinating equipment calibration schedules, maintaining quality standards, and ensuring all...
-
Guitar Technician
2 weeks ago
san fernando, United States Guitar Center Full timePay Rate: $16.00/hr - $29.04/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in...
-
Equipment Maintenance Technician
5 days ago
San Fernando, California, United States ResourceMFG Full timeJob Title: Equipment Maintenance TechnicianWe are seeking a highly skilled and physically capable Equipment Maintenance Technician to join our team at ResourceMFG in Mercersburg, PA. As an Equipment Maintenance Technician, you will be responsible for maintaining and repairing equipment used in the food industry.About the JobThis is a full-time position...
-
Guitar Technician
2 weeks ago
san fernando, United States Guitar Center Full timePay Rate: $16.00/hr - $29.04/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in...
-
Guitar Technician
2 weeks ago
san fernando, United States Guitar Center Full timePay Rate: $16.00/hr - $29.04/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in...
-
QA Plant Monitor
4 weeks ago
San Fernando, United States ResourceMFG Full timesummary NOW HIRING SEASONAL QA PLANT MONITORS IN MARICOPA! Job Type: Full-time /Seasonal Start pay: $22.00 per hour (Resume & Steel Toe Shoes Required) Training hours: Monday-Friday 06:00 AM-2:30 PM Production hours: 12 hours shift, 3 days on/4 days off/4 days on/3 days off (day and night shifts) Quality Assurance Plant Monitor/Truck Sampler-De-linter This...
-
HVAC Technician
3 months ago
San Jose, United States Aramark Full timeAramark - JobID: 505869 [Refrigeration Technician / AC Technician] As a HVAC Technician at Aramark, you'll: Install, inspect, test, operate, and repair all refrigeration and related equipment for preserving food, making ice, cooling water, air conditioning, heating, and ventilation; Calibrate, repair, and maintain all pneumatic control systems and related...
-
Service Technician
2 months ago
San Jose, United States Snap-on Full timeCome join a company dedicated to making the world a safer placeWe have 59 years of knowledge and a retooled vision that challenges us to put our products on every assembly line of the world’s most well-known manufacturing companiesTo do that we need creative thinkers, doers, with a global skill and mindset able to drive product development ideas through to...
-
Operating Technician
1 month ago
San Francisco, California, United States B. Braun Medical Inc Full timeAbout B. Braun Medical Inc.B. Braun Medical Inc. is a leading manufacturer of medical products and services. We are committed to providing innovative solutions to improve patient care and safety. As an Operating Technician, you will play a critical role in ensuring the smooth operation of our manufacturing processes.Responsibilities Operate and maintain...
-
San Antonio, Texas, United States Classic Collision Full timeUltimate Auto Glass and Electronics Elevate Your Automotive Repair Career Are you an experienced Automotive repair specialist seeking a lucrative opportunity to leverage your skills and expertise? We are now hiring an Automotive Calibration/Diagnostic Technician in the ___________ area for a full-time position that offers a competitive...
