Power Electronics Engineer

3 weeks ago


Fort Walton Beach, United States Revolution Technologies Full time

Job Summary:


Permanent Position with amazing benefits

Will pay for relocation


Eligibility Requirement: This position requires access to controlled data or information and therefore only US persons will be considered. As a US Department of Defense contractor, we are bound by the International Traffic in Arms Regulations (ITAR).


Hiring Manager Notes:

  • High power and vehicle electrification experience to have.
  • DC-DC digital design experience? Programming digital processors (bi-directional converters) preferred but not required
  • What do they use for design? We use TI products like code compressor suite.


Location: Fort Walton Beach, FL

Salary Range:

  • Level II= 2-5 years experience= $85-$95k with 2% bonus
  • Level III= 5-8 years experience= $105-$115k with 2% bonus
  • Level IV= 8-12 years experience= $125-$135k with 5% bonus
  • Level V= 12+ years experience= $140-$150k with 5% bonus


Responsibilities:

  • Performs design and development of power converters incorporating modern topologies to achieve high performance at reasonable cost.
  • Program digital signal processors (TI C2000 Delfino series MCU) for power converter control, including control for bidirectional converters.
  • Performs engineering work in basic and applied research, development/design of new or sustaining products.
  • Accepts ownership responsibility for producing thorough and accurate designs and the development of work that meets all customer specifications and company requirements for schedule, cost, producibility, quality and reliability. This includes following the design through the entire design and manufacturing lifecycle.
  • Work includes the design, fabrication, modification and evaluation of electronic apparatus, components, or circuits for use within electronics and/or aerospace equipment, devices, and systems.
  • Conduct technical analysis to validate designs, including but not limited to: trade studies, product design, system/component integration, mathematical modeling, reliability analysis, and development.
  • Perform functional, acceptance, qualification, or development testing on new or modified designs.
  • Perform detailed circuit analysis to verify design compliance to specific performance targets. Analysis to include computer aided modeling and the generation of schematics.
  • Prepare and review technical reports/documentation necessary to satisfy customer, internal and program requirements, including specifications, design documents, test plans/procedures, reports, correspondence, etc.
  • Support the bid and proposal process through technical assistance, preliminary designs, research and development, etc.
  • Establish and maintain proactive communication channels with customers, suppliers, and internal organizations as required to meet project goals.
  • Provide diagnostic support to manufacturing on new and existing products.


Minimum Requirements:

  • 3+ years industry experience electronics power conversion product design and manufacturing; relevant research & product development in support of doctoral degree or post-doctoral research an option.
  • Demonstrated DC-DC or AC-DC converter design experience.
  • Excellent organizational, interpersonal, and communications skills.
  • BSEE, or related technical Bachelor’s degree


Desired:

  • Program digital signal processors (TI C2000 Delfino series MCU) for power converter control, including control for bidirectional converters.
  • Demonstrated experience with manufacturing standards and practices.
  • Ability to provide leadership to engineering design staff.
  • Demonstrated multi-tasking and prioritization skills.
  • Experience with designing product for harsh environments such as military applications.
  • Advanced degree (MSEE / PhD) in power electronics with relevant published research


  • Fort Walton Beach, United States Revolution Technologies Full time

    Job Summary: Permanent Position with amazing benefits! Will pay for relocation! Eligibility Requirement: This position requires access to controlled data or information and therefore only US persons will be considered. As a US Department of Defense contractor, we are bound by the International Traffic in Arms Regulations (ITAR). Hiring Manager Notes: High...


  • Fort Walton Beach, United States Revolution Technologies Full time

    Job Summary: Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply. Permanent Position with amazing benefits! Will pay for relocation! Eligibility Requirement: This position requires access to controlled data or information and therefore only US persons will be considered. As a US...


  • Fort Walton Beach, United States Revolution Technologies Full time

    Job Summary:Permanent Position with amazing benefits!Will pay for relocation!Eligibility Requirement: This position requires access to controlled data or information and therefore only US persons will be considered. As a US Department of Defense contractor, we are bound by the International Traffic in Arms Regulations (ITAR).Hiring Manager Notes:High power...


  • Fort Walton Beach, United States Crane Co Full time

    Crane Aerospace & Electronics is seeking an Electrical Engineering Manager in our Defense Power Group in Fort Walton Beach, FL. Job Summary: The Engineering Manager for the Power Electronics electrical design group manages engineering design and sustaining activities and implements and maintains engineering objectives and initiatives. This role...


  • Long Beach, United States Odys Aviation Full time

    At Odys Aviation, we're building advanced vertical takeoff and landing aircraft for major airlines. This will cut travel time in half on the world's busiest routes by using city helipads and local airports. More than 40% of all flights are less than 1,000 miles - let's skip the airport and make these routes sustainable. Check out our intro video and in...


  • Fort Walton Beach, United States Crane Aerospace & Electronics Full time

    Job Summary: Electronic Assembler II performs, with supervision, basic and routine electronic or hybrid assembly operations on components, printed circuit boards, or subassemblies in accordance with military and/or other assembly standards using blueprints, visual aids, wiring lists, verbal and/or written instructions. The Assembler II may also be...


  • Fort Walton Beach, United States Crane Aerospace & Electronics Full time

    Job Summary: Electronic Assembler II performs, with supervision, basic and routine electronic or hybrid assembly operations on components, printed circuit boards, or subassemblies in accordance with military and/or other assembly standards using blueprints, visual aids, wiring lists, verbal and/or written instructions. The Assembler II may also be...


  • Fort Wayne, United States Regal Rexnord Corp Full time

    We have unique opportunities for electronic hardware engineers at various seniority levels to drive the development of motor control solutions from business case to production launch. Hardware Electronics Engineers will be responsible for the execution of multi-generation product plans for the Climate Solutions business, and take direct ownership of...


  • Fort Walton Beach, United States Revolution Technologies Full time

    We're hiring an Electrical Engineering Manager for a well known Aerospace company in Ft. Walton, FL. The Engineering Manager for the Power Electronics electrical design group manages engineering design and sustaining activities and implements and maintains engineering objectives and initiatives. This role manages resources involved power electronics...


  • Fort Walton Beach, United States Revolution Technologies Full time

    We're hiring an Electrical Engineering Manager for a well known Aerospace company in Ft. Walton, FL. The Engineering Manager for the Power Electronics electrical design group manages engineering design and sustaining activities and implements and maintains engineering objectives and initiatives. This role manages resources involved power electronics...


  • Fort Walton Beach, United States Revolution Technologies Full time

    We're hiring an Electrical Engineering Manager for a well known Aerospace company in Ft. Walton, FL. The Engineering Manager for the Power Electronics electrical design group manages engineering design and sustaining activities and implements and maintains engineering objectives and initiatives. This role manages resources involved power electronics...


  • Fort Walton Beach, United States Revolution Technologies Full time

    We're hiring an Electrical Engineering Manager for a well known Aerospace company in Ft. Walton, FL. The Engineering Manager for the Power Electronics electrical design group manages engineering design and sustaining activities and implements and maintains engineering objectives and initiatives. This role manages resources involved power electronics...


  • Fort Walton Beach, United States Revolution Technologies Full time

    We're hiring an Electrical Engineering Manager for a well known Aerospace company in Ft. Walton, FL. The Engineering Manager for the Power Electronics electrical design group manages engineering design and sustaining activities and implements and maintains engineering objectives and initiatives. This role manages resources involved power electronics...


  • Fort Walton Beach, United States Aerotek Full time

    Working with an Aerospace Electronics company in the Fort Walton Beach area that is seeking qualified Electronic Assemblers for 1st Shift!!! Description: The Electronics Technician works under limited direction/supervision and is responsible to test, troubleshoot, repair, and modify production of electronic or mechanical products, parts, equipment and...


  • Fort Walton Beach, United States Crane Co Full time

    Crane Aerospace and Electronics has an exciting opportunity for an Electronics Assembler II at our Ft. Walton Beach, FL site. Hours are Monday-Friday 6am-3:30pm on a 9/80 schedule. Job Summary: Electronic Assembler II performs, with supervision, basic and routine electronic or hybrid assembly operations on components, printed circuit boards, or...


  • Virginia Beach, United States Power Monitors Full time

    Electronics Assembler performs any combination of the following tasks to assemble components, sub-assemblies and finished products. Essential Duties and Responsibilities: Reads work orders, follows assembly documentation, sample assemblies or verbal instructions. Positions and aligns electronic components such as resistors and sockets onto printed circuit...


  • Fort Walton Beach, United States Okaloosa County, FL Full time

    GENERAL STATEMENT OF JOB Installs, constructs, maintains, and repairs water distribution, wastewater collection and wastewater treatment facility (WWTF) system structures, equipment and monitoring devices. EXAMPLES OF WORK * Performs construction, maintenance, and repairs on structures, facilities and equipment for the water and sewer collection and...


  • Fort Walton Beach, United States Aerotek Full time

    SEEKING ASSEMBLERS IN THE FORT WALTON BEACH AREA! $17-23 AN HOUR DEPENDING ON EXPERIENCE! Job Duties: Position and align parts in specified relationship to each other and uses hand or power tools to secure parts Mount assembled components on chassis, panels, or circuit boards Route wiring and cabling through assembly to terminals according to color codes...


  • Fort Wright, United States Insight Global Full time

    Insight Global is seeking a candidate for a Senior Electronics Engineer (with BSEE or MSEE and 5+ years of related experience) at our Kentucky USA office. In this role, you will be a US citizen or permanent resident, responsible for overall electronic design, subsystems and modules for the GNSS receivers and products within the JAVAD portfolio. The ideal...

  • Electronics Engineer

    3 weeks ago


    Fort Wright, United States Insight Global Full time

    Insight Global is seeking a candidate for a Senior Electronics Engineer (with BSEE or MSEE and 5+ years of related experience) at our Kentucky USA office. In this role, you will be a US citizen or permanent resident, responsible for overall electronic design, subsystems and modules for the GNSS receivers and products within the JAVAD portfolio. The ideal...