Press Operator

4 weeks ago

Grand Rapids, United States Boyd Full time

Job Description

Essential Duties Include:

Read and understand “Change Spec. Card Procedure” Read and understand “Non-Conforming Product Procedure” Get magnets from magnet board that contains the work order information for production Locate pallet or cart with the WOR folder containing the corresponding material, work order numbers and instructions Determine and obtain the correct tool for the job identified on the Spec. Card from the tooling rack Remove tooling from box, attach bearer blocks and slide into tooling station Set the machine for the appropriate job Retain Supplier raw material tag with lot # and run # information along with “Approved for Use” tags on separate sheet of paper (if only using partial material and retuning excess material do not retain tag, just record part #, lot # and run # on sheet) Complete “Sign-off Check List” (if operator has less than 1-year experience, needs sign-off from experienced operator with over 1 year experience) Print out (core tags or box tags) along with 1st piece and last piece labels with correct information, Make sure the right material is used where needed, to the proper side of the liner and in the right orientation Place material in machine. Feed it through the fife guide and adjust it for center run. Place adhesive in machine and line-up with materials so that they are even with each other Start machine, adjust tension and alignment as needed Pass the material through to the die cutting station Remove any waste or air-injection from the tool Adjust nip-roller speed for proper speed and dimensions of part Verify part to print and or mylar and record dimensions Retain first approved piece and place label on back side Complete In-Process check sheet during the run. Complete End-of-Run sign off confirming the required parts were produced. Retain last approved piece and label back side Maintain a clean and safe work area, cleaning floor, machine, work area at end of each job and at end of shift Cut cores for particular jobs when needed. Obtain boxes and materials necessary for job Operate production equipment to produce good, quality product in an efficient/quality-oriented manner. Makes suggestions for ways to improve production process Works with sales and estimating to test/run samples for new product introduction Makes sure product being produced matches the spec card and the degree of quality needed (tolerances Updates spec card for future runs when process is changed Observe machine operation to detect workpiece defects or machine malfunctions; adjust machines as necessary. Change worn machine accessories such as cutting tools and brushes, using hand tools. Perform minor machine maintenance, such as oiling or cleaning machines, changing filters or adding lubricant to the Rotary press when necessary. Notify supervisors when major service is required. Other duties as assigned.

Education:

High school diploma or equivalent

Requirements

Essential Duties Include:

Read and understand “Change Spec. Card Procedure” Read and understand “Non-Conforming Product Procedure” Get magnets from magnet board that contains the work order information for production Locate pallet or cart with the WOR folder containing the corresponding material, work order numbers and instructions Determine and obtain the correct tool for the job identified on the Spec. Card from the tooling rack Remove tooling from box, attach bearer blocks and slide into tooling station Set the machine for the appropriate job Retain Supplier raw material tag with lot # and run # information along with “Approved for Use” tags on separate sheet of paper (if only using partial material and retuning excess material do not retain tag, just record part #, lot # and run # on sheet) Complete “Sign-off Check List” (if operator has less than 1-year experience, needs sign-off from experienced operator with over 1 year experience) Print out (core tags or box tags) along with 1st piece and last piece labels with correct information, Make sure the right material is used where needed, to the proper side of the liner and in the right orientation Place material in machine. Feed it through the fife guide and adjust it for center run. Place adhesive in machine and line-up with materials so that they are even with each other Start machine, adjust tension and alignment as needed Pass the material through to the die cutting station Remove any waste or air-injection from the tool Adjust nip-roller speed for proper speed and dimensions of part Verify part to print and or mylar and record dimensions Retain first approved piece and place label on back side Complete In-Process check sheet during the run. Complete End-of-Run sign off confirming the required parts were produced. Retain last approved piece and label back side Maintain a clean and safe work area, cleaning floor, machine, work area at end of each job and at end of shift Cut cores for particular jobs when needed. Obtain boxes and materials necessary for job Operate production equipment to produce good, quality product in an efficient/quality-oriented manner. Makes suggestions for ways to improve production process Works with sales and estimating to test/run samples for new product introduction Makes sure product being produced matches the spec card and the degree of quality needed (tolerances Updates spec card for future runs when process is changed Observe machine operation to detect workpiece defects or machine malfunctions; adjust machines as necessary. Change worn machine accessories such as cutting tools and brushes, using hand tools. Perform minor machine maintenance, such as oiling or cleaning machines, changing filters or adding lubricant to the Rotary press when necessary. Notify supervisors when major service is required. Other duties as assigned.

Education:

High school diploma or equivalent

  • Set Up Brake Press Operator

    1 month ago

    Grand Rapids, United States Elwood Staffing Full time

    An international manufacturer of point of purchase displays and decorative wire products is looking to add a Set-Up Break Press Operator to their team. Apply today to learn more! Company Profile. Our client is an international manufacturer of point o Press Operator, Brake Press, Press, Operator, Staffing, Production

  • Set Up Brake Press Operator

    2 months ago

    Grand Rapids, United States Elwood Staffing Full time

    An international manufacturer of point of purchase displays and decorative wire products is looking to add a Set-Up Break Press Operator to their team. Apply today to learn more! Company Profile. Our client is an international manufacturer of point o Press Operator, Brake Press, Press, Operator, Staffing, Production

  • Flexographic Press Operator

    3 weeks ago

    Grand Rapids, United States Advantage Label & Packaging, Inc Full time

    Advantage Label and Packaging was built upon the belief that relationships are the fundamental elements for success. From our customers and vendors to our team members, our goal is to create long-term partnerships based on trust. We are focused on making lives better for our clients, employees, and business partners. Our unique approach to labeling solutions...

  • Brake Press Operator

    4 weeks ago

    Grand Rapids, United States Metal Components Full time

    Job DescriptionJob DescriptionJob Title: Press Brake OperatorDepartment: ManufacturingReports To: Shift SupervisorFLSA Status: Non-exempt SUMMARYSet up and operate press brake to bend, notch, punch, form roll, arc or straighten metal plates or sheet metal, following structural blueprint or sketch specifications, complying with quality standards.PRIMARY...

  • Printing Press Operator

    5 days ago

    Grand Rapids, United States Graphic Specialties Full time

    Job Title: Printing Press Operator This is a full-time position. Pay for this position will range from $18.00-$24.00 per hour depending on level of relevant experience. We are a leading trade bindery/finishing company. We offer services such as printing, PUR perfect binding, mechanical book binding, index tabbing, die cutting, foil stamping, folding &...

  • Press Operator

    4 weeks ago

    Grand Rapids, United States Boyd Company Full time

    Job DescriptionEssential Duties Include: Read and understand "Change Spec. Card Procedure" Read and understand "Non-Conforming Product Procedure" Get magnets from magnet board that contains the work order information for production Locate pallet or cart with the WOR folder containing the corresponding material, work order numbers and instructions Determine...

  • Press Operator

    2 weeks ago

    Grand Rapids, Michigan, United States Boyd Company Full time

    Essential Duties Include: Read and understand "Change Spec. Card Procedure" Read and understand "Non-Conforming Product Procedure" Get magnets from magnet board that contains the work order information for production Locate pallet or cart with the WOR folder containing the corresponding material, work order numbers and instructions Determine and obtain the...

  • Digital Print Label Press Operator

    2 weeks ago

    Grand Rapids, Michigan, United States Advantage Label & Packaging, Inc Full time

    Advantage Label and Packaging (a UFP Packaging Company) was built upon the belief that relationships are the fundamental elements for success. From our customers and vendors to our team members, our goal is to create long-term partnerships based on trust. We are focused on making lives better for our clients, employees, and business partners. Our unique...

  • Press Assistant

    3 weeks ago

    Grand Rapids, United States Dennen Steel Corp Full time

    **Job Title**: General Laborer **Department**: Press **Reports To**: Press Supervisor **FLSA Status**: Non-Exempt **SUMMARY** Total responsibility for the safe, quality, and efficient operation of a press and banding tool. **ESSENTIAL DUTIES AND RESPONSIBILITIES **include the following. Must maintain a regular, reliable, consistent and punctual...

  • Press Operator

    4 weeks ago

    Grand Rapids, United States Boyd Full time

    **Essential Duties Include: - Read and understand “Change Spec. Card Procedure” - Read and understand “Non-Conforming Product Procedure” - Get magnets from magnet board that contains the work order information for production - Locate pallet or cart with the WOR folder containing the corresponding material, work order numbers and instructions -...

  • Press Brake Operator

    4 weeks ago

    Grand Rapids, United States GA Richards Full time

    Job Type Full-timeDescriptionPay Scale: $16 - $25/hourShift: Monday - Friday, 7:00 AM - 3:00 PMBenefits After 90 days: Medical, Dental, Vision, PTO, and 401K!Set-up experience is preferred, but we are willing to train someone with great mechanical knowledge!Set up, adjust and operate press brakes to perform standardized and repetitive production operations...

  • Press Assistant

    2 weeks ago

    Grand Rapids, United States Dennen Steel Corp Full time

    **SUMMARY** Total responsibility for the safe, quality, and efficient operation of a press and banding tool. **ESSENTIAL DUTIES AND RESPONSIBILITIES **include the following. Must maintain a regular, reliable, consistent and punctual attendance in accordance with assigned schedule and time off policies. Other duties may be assigned. - Cover primary...

  • Press Brake Operator

    4 weeks ago

    Grand Rapids, United States GA Richards Full time

    Job Type Full-time Description Pay Scale: $16 - $25/hour Shift: Monday - Friday, 7:00 AM - 3:00 PM Benefits After 90 days: Medical, Dental, Vision, PTO, and 401K! Set-up experience is preferred, but we are willing to train someone with great mechanical knowledge! Set up, adjust and operate press brakes to perform standardized and repetitive production...

  • Digital Print Label Press Operator

    3 weeks ago

    Grand Rapids, United States Advantage Label & Packaging, Inc Full time

    Advantage Label and Packaging (a UFP Packaging Company) was built upon the belief that relationships are the fundamental elements for success. From our customers and vendors to our team members, our goal is to create long-term partnerships based on trust. We are focused on making lives better for our clients, employees, and business partners. Our unique...

  • Automatics Press Operator

    2 weeks ago

    Grand Rapids, United States Ridgeview Industries, Inc. Full time

    If you are looking for an organization committed to the principles of Excellence, Integrity, Faith, and Teamwork, then Ridgeview Industries offers a challenging and rewarding employment opportunity for you. Ridgeview Industries is a leading metal stamping and assembly supplier primarily serving the automotive market. We currently employ approximately 600...

  • Press Brake Operator

    4 weeks ago

    Grand Rapids, United States GA Richards Full time

    Job DescriptionJob DescriptionShift: Monday - Friday, 7:00 AM - 3:00 PMBenefits After 90 days: Medical, Dental, Vision, PTO, and 401K!Set-up experience is preferred, but we are willing to train someone with great mechanical knowledge!Set up, adjust and operate press brakes to perform standardized and repetitive production operations on a limited variety of...

  • Press Brake Setup Operator

    2 weeks ago

    Grand Rapids, United States G A Richards Company Full time

    Description: **Pay Scale**: $16 - $25/hour **Shift**: Monday - Friday, 7:00 AM - 3:00 PM **Benefits After 90 days**: Medical, Dental, Vision, PTO, and 401K! Set-up experience is preferred, but we are willing to train someone with great mechanical knowledge! Set up, adjust and operate press brakes to perform standardized and repetitive production...

  • Press Brake Operators

    2 weeks ago

    Grand Haven, Michigan, United States Workbox Staffing Full time

    Job DescriptionJob Description Press Brake Operator, Up to $24/hr – 1st Shift - West Olive This company is hiring urgently Apply nowPreferred Qualifications: Ability to read blueprints, micrometers, and calipers is required. Ability to troubleshoot problems with machinery. Must be able to lift up to 50 lbs. is required. 1+ year experience with Press...

  • 2nd Shift Press Assistant

    3 weeks ago

    Grand Rapids, United States Advantage Label & Packaging, Inc Full time

    **Advantage Label & Packaging** was built upon the belief that relationships are the fundamental elements for success. From our customers and vendors to our team members, our goal is to create long-term partnerships based on trust. We are focused on making lives better for our clients, employees, and business partners. Our unique approach to labeling...

  • Case Press Operator

    3 weeks ago

    Grand Island, United States Essential Personnel Inc Full time

    Are you wanting to work for a family owned company? Essential Personnel is seeking candidates to fill Case Press Operator positions at a company in Grand Island. Candidates must have at least 1-2 years manufacturing or machine operating experience. A Press Operator, Press, Operator, Mechanical, Staffing, Manufacturing