Engineer Trainee/Assistant Engineer

2 weeks ago

Monroe, United States Transportation, Department of Full time

Minimum Qualifications This title is part of the New York Hiring for Emergency Limited Placement Statewide Program (NY HELPS).* To be considered for appointment through NY HELPS, or 55 b/c, candidates must meet the open competitive minimum qualifications for this position. The qualifications are:

Engineer Trainee:

Either 1. a bachelor's degree or higher in engineering or engineering technology as listed below;
Or 2. proof of passing the NCEES Fundamentals of Engineering Examination (FE) AND one year of full-time engineering experience as listed below.

As an Engineer Trainee, you will serve a 24-month traineeship that leads to Assistant Engineer, Grade 20. To advance to Assistant Engineer, you must have obtained proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) and successfully completed the requirements of the traineeship to the satisfaction of the appointing authority. At the discretion of the appointing authority, early advancement to the Assistant Engineer is possible if you have obtained your FE and have successfully completed twelve months of the traineeship. It is your responsibility to notify the appointing authority’s personnel office upon obtaining proof of passing the FE. You may receive an increase in salary upon obtaining your FE. Information about this increase will be provided by the appointing authority.

Assistant Engineer:

Either 1. proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) AND a qualifying bachelor's degree or higher as listed below;
Or 2. proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) AND one year of full-time qualifying engineering experience as listed below.

Qualifying degrees: Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Geological Engineering, Geotechnical Engineering, Hydraulics Engineering, Materials Engineering, Materials Science and Engineering, Metallurgical and Materials Engineering, Structural Engineering, Transportation Engineering, Transportation Planning and Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees.

Qualifying experience: One year of full-time engineering experience with transportation projects related to highways/roadways, railroads, bridges, airports, waterways, building structures, or traffic management and safety systems.

Candidates may also be qualified for permanent appointment if reachable from the appropriate Civil Service eligible list or eligible for reassignment or transfer in accordance with Civil Service Law

Duties Description Under the direction and supervision of a licensed professional engineer, incumbents perform a variety of duties depending on assignment. Engineer Trainees/Assistant Engineers are found throughout DOT in a variety of programs.

When assigned to DESIGN, typical duties will include, but are not limited to:

*Prepare 3D plans for highway and bridge projects using CADD;

*Assist with the preparation of project reports (., project scoping reports, design reports, drainage reports),
development of engineer’s estimates, project scheduling and gathering and compilation of site data; and

*Develop notes and specifications for specialty work.
While positions are being filled for specific program areas, ET/AE’s may be assigned to various program areas
throughout their employment based on operational need. Occasionally, incumbents may also be called upon to
support department needs in other locations. This effort could range from participating remotely to occasional
travel as necessary to support program operations, capital program delivery, emergency efforts or other critical
department initiatives.

Responsibilities may include serving a role within the Incident Command System to support the department’s response to regional and statewide emergency situations.

Some positions may require additional credentials or a background check to verify your identity.

  • Engineering Technician Trainee/Senior Engineering Technician

    1 month ago

    Monroe, United States Transportation, Department of Full time

    Minimum Qualifications This title is part of the New York Hiring for Emergency Limited Placement Statewide Program (NY HELPS).* To be considered for appointment through NY HELPS, or 55 b/c, candidates must meet the open competitive minimum qualifications for this position. The qualifications are: Engineer Technician Trainee: Either 1. one year of...

  • Launch Engineer

    2 weeks ago

    Monroe, United States Midway Products Group Full time

    POSITION SUMMARY Responsible for the project launch of manufacturing process for products (new or engineering change) from prototype phase though customer launch and early phases of mass production. Facilitates the review and release of product data provided by the customer to the Midway organization and vendors. Coordinates kick-off activity for new...

  • Driver Helper Trainee

    4 weeks ago

    Monroe, United States Waste Connections Full time

    Waste Connections is thrilled to offer a one-of-a-kind opportunity for individuals looking to kickstart their career in commercial driving. Join our team in Monroe, LA! Start your journey with us today and be part of a dynamic and growing company that values its employees. Waste Connections will provide fully paid CDL schooling to motivated individuals who...

  • Manufacturing Engineer

    2 weeks ago

    Monroe, United States ITEC Co. Full time

    Job Description - Manufacturing Engineer Position Title: Manufacturing Engineer Summary Job Description: Eliminate waste in the manufacturing process and apply innovative systems to improve company workflows. Set criteria for quality and speed, then consistently measure manufacturing behaviors and evaluate success. Identify delays in production and...

  • Manufacturing Engineer

    3 weeks ago

    Monroe, United States ITEC Full time

    Job DescriptionJob DescriptionJob Description - Manufacturing EngineerPosition Title: Manufacturing EngineerSummary Job Description:Eliminate waste in the manufacturing process and apply innovative systems to improve company workflows. Set criteria for quality and speed, then consistently measure manufacturing behaviors and evaluate success. Identify delays...

  • Quality Engineer

    1 day ago

    Monroe, United States Trade Up Careers Full time

    Job DescriptionJob DescriptionOverview:The Quality Engineer will support the plant quality group through daily involvement in on-the-floor activities and by providing assistance in areas including but not limited to product launch, corrective action resolution, reviewing incoming supplier product, maintaining key quality documentation and communicating with...

  • Manufacturing Engineer

    5 days ago

    Monroe, United States ITEC Co. Full time

    Job Description - Manufacturing EngineerPosition Title: Manufacturing EngineerSummary Job Description:Eliminate waste in the manufacturing process and apply innovative systems to improve company workflows. Set criteria for quality and speed, then consistently measure manufacturing behaviors and evaluate success. Identify delays in production and sources of...

  • Manufacturing Engineer

    7 days ago

    Monroe, United States Itec Ctvt Full time

    Job Description - Manufacturing Engineer Position Title: Manufacturing Engineer Summary Job Description: Eliminate waste in the manufacturing process and apply innovative systems to improve company workflows. Set criteria for quality and speed, then consistently measure manufacturing behaviors and evaluate success. Identify delays in production and sources...

  • Process Engineer

    3 weeks ago

    Monroe, United States Gerdau Full time

    This position will assist the site Routine Facilitators, Finishing Superintendent, and plant management in ensuring the efficiency and effectiveness of all improvement aspects within their area of responsibility. The major role of this job is to focus on continuous improvement and integration of improvement principles, technical and engineering principles,...

  • Process Engineer

    3 weeks ago

    Monroe, United States Job Juncture Full time

    Job Description Job description: MISSION / SUMMARY:This is a key pulp manufacturing position with management and technical oversight of day to day operations, production improvements, and ensures the operational efficiency and safe operations of the Fiber department. The Fiber department includes operation of 3 continuous digesters (3-Kamyr), recycle plant...

  • Manufacturing Engineering Manager

    2 weeks ago

    Monroe, United States Decore-ative Specialties Full time

    Job Summary: The Manufacturing Engineering Manager plans, directs, and coordinates the activities of the maintenance, tooling, IT, and engineering departments, facilitating efficient manufacturing operations across the organization. Supervisory Responsibility: · Recruits, interviews, hires, and trains new staff in the department · Oversees the daily...

  • Product Design Engineer

    3 weeks ago

    Monroe, United States ITEC Co. Full time

    About the Company:Instrument Transformer Equipment Corporation (ITEC) is a leading provider of standard and custom engineered top quality instrument transformers. These are built to provide long term service and high accuracy in utility applications of metering and protection. The business is located in Monroe, NC (suburb of Charlotte, NC) and is...

  • Manufacturing Engineer

    4 weeks ago

    Monroe, United States CIRCOR Full time

    Manufacturing Engineer ORGANIZATIONAL STRUCTURE BUSINESS: Industrial LOCATION: Monroe, NC DIRECT REPORTING: Engineering Manager, Manufacturing FUNCTIONAL REPORTING: ManufacturingPOSITION DETAILS Position Summary This position will serve as the liaison between Manufacturing Engineering and other functional groups including manufacturing, design engineering,...

  • Senior Project Engineer

    2 days ago

    Monroe, United States CSafe Full time

    CSafe is seeking a Senior Project Engineer in Monroe, Ohio to join our world class global engineering team! In this role, you will provide continuous project management monitoring and support on large or complex engineering projects to ensure they are well planned, controlled and executed within the agreed project timeline and budget. Come join our growing...

  • Product Design Engineer

    2 weeks ago

    Monroe, United States ITEC Co. Full time

    About the Company: Instrument Transformer Equipment Corporation (ITEC) is a leading provider of standard and custom engineered top quality instrument transformers. These are built to provide long term service and high accuracy in utility applications of metering and protection. The business is located in Monroe, NC (suburb of Charlotte, NC) and is...

  • Product Design Engineer

    1 month ago

    Monroe, United States ITEC Full time

    Job DescriptionJob DescriptionAbout the Company:Instrument Transformer Equipment Corporation (ITEC) is a leading provider of standard and custom engineered top quality instrument transformers. These are built to provide long term service and high accuracy in utility applications of metering and protection. The business is located in Monroe, NC (suburb of...

  • Product Design Engineer

    4 days ago

    Monroe, United States ITEC Co. Full time

    About the Company: Instrument Transformer Equipment Corporation (ITEC) is a leading provider of standard and custom engineered top quality instrument transformers. These are built to provide long term service and high accuracy in utility applications of metering and protection. The business is located in Monroe, NC (suburb of Charlotte, NC) and is...

  • Manufacturing Engineer

    7 days ago

    Monroe, United States CIRCOR Full time

    Manufacturing Engineer ORGANIZATIONAL STRUCTURE BUSINESS: Industrial LOCATION: Monroe, NC DIRECT REPORTING: Engineering Manager, Manufacturing FUNCTIONAL REPORTING: Manufacturing POSITION DETAILS Position Summary This position will serve as the liaison between Manufacturing Engineering and other functional groups including manufacturing, design...

  • Manufacturing Engineer

    4 weeks ago

    Monroe, United States CIRCOR International Full time

    Manufacturing Engineer ORGANIZATIONAL STRUCTURE BUSINESS: Industrial LOCATION: Monroe, NC DIRECT REPORTING: Engineering Manager, Manufacturing FUNCTIONAL REPORTING: Manufacturing POSITION DETAILS Position Summary This position will serve as the liaison between Manufacturing Engineering and other functional groups including manufacturing, design engineering,...

  • Manufacturing Engineer

    3 weeks ago

    Monroe, United States TalentBridge Full time

    Talentbridge is partnered with a local manufacturing team with focus on innovative technologies and are seeking a skilled and experienced Manufacturing Engineer specializing in Machining, CNC, and assembly processes. The ideal candidate will be responsible for overseeing the production processes, ensuring efficiency, quality, and timely delivery of products....