SCA Engineering Technician III
4 weeks ago
Job Description
The selected candidate will be part of a dynamic team providing technical and engineering services to USMC Air Traffic Control Systems worldwide. Will support electronic system, component installation, integration, troubleshooting, and repair. Will develop training curriculum and materials for fleet training evolutions. Will also review, write, and update technical documentation. Will be required to work independently and as part of a small team.
The hourly rate for this position is set by the Dept of Labor and is not negotiable. Current rate is $
This position is located in scenic and historic Southern Maryland in the St. Mary's County Technology Corridor adjacent to the Patuxent River Naval Air Station.
There is no monetary relocation assistance budgeted for this position. Applicants must be currently residing in or state willingness to relocate self to St. Mary's County, Maryland or surrounding areas.
Please be sure to address all requirements of posted requisition in resume. Only resumes that include all requirements will be considered.
Required Education, Experience, & Skills
High school diploma and completion of Navy Electronics “C” School or equivalent At least 8 years of experience in electronic systems, including installing electronic systems equipment and designing, preparing and modifying engineering documents and drawings At least 4 years of experience in Navy/Marine Corps ATC systems (within the last three 3 years) Ability to provide electronic, telephonic, and on-site fleet support on the operation and maintenance of military radar and navigational aids Ability to develop training curriculum and materials for fleet training evolutions Ability to train others on the use and maintenance of electronic systems Experience with test plans, procedures, schematics, technical manuals, drawings, and wire lists Experience reviewing, writing, and updating technical documentation Ability to conduct Line Replaceable Unit (LRU) level repair of electronic systems Familiarity with the Naval Aviation Maintenance Program (NAMP) Knowledge on the proper use of common and specialty hand tools, general purpose electronic test equipment (GPETE) and special purpose electronic test equipment (SPETE) Ability and willingness to travel to CONUS/OCONUS locations (20%) Experience in maintenance, repair, restoration, test, and evaluation of Air Traffic Control systems
Preferred Education, Experience, & Skills
Associate degree in electronics or engineering technology Experience in maintenance, repair, restoration, test, and evaluation of AN/TPN-31 ATNAVICS or AN/TRN-47(V)2 AMTAC Certification as a Collateral Duty Inspector (CDI) or Collateral Duty Quality Assurance Representative (CDQAR) Experience using Microsoft Office software Familiarity with the operation of Unix and/or Linux software Flexibility to learn and utilize other systems supported by this competency
Pay Information
This position is covered by a wage law called the McNamara-O'Hara Service Contract Act (SCA). The wage range for this position is determined by the Wage and Hour Division of the Department of Labor on a contract-by-contract basis.
Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.
-
Electrical Engineer III
3 weeks ago
Saint Louis, United States RTM Engineering Consultants Full timeJob DescriptionJob DescriptionPosition: Electrical Engineer IIILocation: St. Louis, MO Years of Experience: 3+ YearsAbout RTM: RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each...
-
Sterile Processing Clerk
1 week ago
Saint Louis Park, United States SCA Health Full timeOverview:Today, SCA Health has grown to 11,000 teammates who care for 1 million patients each year and support physician specialists holistically in many aspects of patient care. Together, our teammates create value in specialty care by aligning physicians, health plans and health systems around a common goal: delivering on the quadruple aim of high-quality...
-
Industrial Maintenance Technician I-III
3 weeks ago
Saint Paul, Minnesota, United States FedEx Ground Full timeJob SummaryThe Maintenance Technician III supports the FedEx Ground industrial maintenance of material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to mechanical power transmission, electrical, PLC/controls, welding/fabrication and other industrial...
-
Pharmacy Technician III
2 weeks ago
Saint Paul, Minnesota, United States Fairview Health Services Full timeOverview: Are you an experienced pharmacy technician with an active registration on the MN Board of Pharmacy? We at MHealth Fairview are looking for you to join our amazing team located in Minneapolis! This benefits eligible position is a 1.0FTE (80 hours/2 weeks) on the day shift! Under the direction of the Pharmacist, the Pharmacy Technician III is...
-
Scheduler - Midwest Ambulatory Surgery Center
4 weeks ago
Saint Paul, Minnesota, United States SCA Health Full timeOverview: Today, SCA Health has grown to 11,000 teammates who care for 1 million patients each year and support physician specialists holistically in many aspects of patient care. Together, our teammates create value in specialty care by aligning physicians, health plans and health systems around a common goal: delivering on the quadruple aim of high-quality...
-
Scheduler - Midwest Surgery Center
4 weeks ago
Saint Paul, Minnesota, United States SCA Health Full timeOverview: Today, SCA Health has grown to 11,000 teammates who care for 1 million patients each year and support physician specialists holistically in many aspects of patient care. Together, our teammates create value in specialty care by aligning physicians, health plans and health systems around a common goal: delivering on the quadruple aim of high-quality...
-
QC Technician III
2 weeks ago
Saint Joseph, United States Planet Pharma Full timeQuality Control Technician III12 month contract$28.96/hr.St Joseph, MORequiredMICROBIOLOGICALASEPTIC TECHNIQUEDOCUMENTATIONAdditionalGMPResponsibilities: Perform microbiological methods including microbial identification and environmental monitoring of classified environments. Responsible for timely communication with supervisors to inform them of testing,...
-
Information Technology Security Engineer III
3 days ago
Saint Petersburg, United States Jabil Inc. Full timeInformation Technology Security Engineer III positions offered by Jabil Inc. (St. Petersburg, FL). Consult w/ architects & other groups to ensure that solutions enter'g Jabil meet security reqs and also ensure that security solut'ns satisfy architecture reqs. Employee reports to office in St. Petersburg, FL, but may telecommute from anywhere in the U.S....
-
Maintenance Technician
2 weeks ago
Saint Michael, United States Path Engineering Full timeJob DescriptionJob DescriptionRoleAs a Maintenance Technician (also known as Machine Tool Service Technician, Equipment Maintenance Technician), you'll be responsible for maintaining and repairing our fleet of machines and systems to ensure optimal performance. This includes performing preventative maintenance tasks, troubleshooting and repairing...
-
Facilities Maintenance Technician
1 week ago
Saint Paul, United States Strom Engineering Full timeJob DescriptionJob DescriptionStrom Minnesota is currently looking for a Facilities Maintenance Technician for our client in W. St. Paul.POSITION SUMMARYThe Maintenance Technician is responsible for performing various maintenance functions that are necessary to maintain and enhance the value of the community. They work with the maintenance team and...
-
Maintenance Engineer
6 hours ago
Saint Michael, United States Path Engineering Full timeJob DescriptionJob DescriptionRoleAs a Machine Tool Service Engineer (also known as Equipment Maintenance Engineer, Machine Maintenance Technician), you'll be responsible for maintaining and repairing our fleet of high precision tooling and machining systems. Your duties will include performing preventative maintenance tasks, managing spare parts...
-
CNC Machine Maintenance Engineer
2 weeks ago
Saint Michael, United States Path Engineering Full timeJob DescriptionJob Description```RoleAs a Machine Tool Service Engineer (also known as Equipment Maintenance Engineer, Machine Tool Technician), you'll be responsible for maintaining the optimal performance of our fleet of machines and systems. This includes routine maintenance, repairs, and troubleshooting. You'll also manage spare parts inventory,...
-
Lead Engineer
4 days ago
Saint Cloud, United States Apex Engineering Group Full timeJob DescriptionJob DescriptionOffice Location: St. Cloud, MNApex Engineering Group has openings for a Lead Engineer working in our Transportation Group located in our St. Cloud, MN office. This position has been created to specifically focus on continued development and expansion of Apex’s Transportation services in the North and West Central region of...
-
Lead Engineer
3 weeks ago
Saint Cloud, United States Apex Engineering Group Full timeJob DescriptionJob DescriptionOffice Location: St. Cloud, MNApex Engineering Group has openings for a Lead Engineer working in our Transportation Group located in our St. Cloud, MN office. This position has been created to specifically focus on continued development and expansion of Apex’s Transportation services in the North and West Central region of...
-
Lead Engineer
4 days ago
Saint Cloud, United States Apex Engineering Group Full timeJob DescriptionJob DescriptionOffice Location: St. Cloud, MNApex Engineering Group has an opening for a Lead Engineer working in our Municipal Group located in our St. Cloud, MN office. Primary responsibilities include managing a team of engineers, technicians and support staff on general municipal projects from the planning phase through design and...
-
Lead Engineer
4 days ago
Saint Cloud, United States Apex Engineering Group Full timeJob DescriptionJob DescriptionOffice Location: St. Cloud, MNApex Engineering Group has an opening for a Lead Engineer working in our Water Group located in our St. Cloud, MN office. Primary responsibilities include managing a team of engineers, technicians, and support staff on water and/or wastewater projects from the planning phase through design and...
-
Lead Engineer
3 weeks ago
Saint Cloud, United States Apex Engineering Group Full timeJob DescriptionJob DescriptionOffice Location: St. Cloud, MNApex Engineering Group has an opening for a Lead Engineer working in our Water Group located in our St. Cloud, MN office. Primary responsibilities include managing a team of engineers, technicians, and support staff on water and/or wastewater projects from the planning phase through design and...
-
Lead Engineer
3 weeks ago
Saint Cloud, United States Apex Engineering Group Full timeJob DescriptionJob DescriptionOffice Location: St. Cloud, MNApex Engineering Group has an opening for a Lead Engineer working in our Municipal Group located in our St. Cloud, MN office. Primary responsibilities include managing a team of engineers, technicians and support staff on general municipal projects from the planning phase through design and...
-
Saint Inigoes Shores, Maryland, United States BAE Systems Full timeJob Description The selected candidate's responsibilities include but are not limited to:Demonstrate that equipment/systems function in accordance with Stage 3 through Stage 7 test procedures. Troubleshoot equipment/system failures and repair associated equipment for shipboard Radio Communications System (RCS). Work with engineering department to develop...
-
Lead Engineer
4 days ago
Saint Cloud, United States Apex Engineering Group Full timeJob DescriptionJob DescriptionOffice Location: St. Cloud, MNApex Engineering Group has an opening for a Lead Engineer working in our Water Group located in our St. Cloud, MN office. Primary responsibilities include managing a team of engineers, technicians and support staff on water resource projects from the planning phase through design and...