Die Cut Helper
2 months ago
Position Summary
Works as a helper on one of the 3 Die Cut Machines. Assist Die Cut Operator with changeovers and set-up, produce parts and packaging. Also responsible for following safety, quality and production requirements for the department.
Position Responsibilities
Helps to remove material from machine and package.
Follows established procedures and setups.
Responsible for punching out die cut holes, packaging, and labeling as assigned by machine operator or lead.
Perform minor repairs or adjustments to machine settings to ensure proper machine operating efficiencies as instructed to do so by machine operator, shift lead, or supervisor.
Reports any machine safety concerns, equipment malfunctions, or product abnormalities immediately to operator, shift lead, and/or supervisor.
Any other task assigned by management to include housekeeping within the department and department assigned exterior area of the facility.
Performs other duties as assigned
Nature and Scope
Works under direct supervision and follows written/verbal instructions to accomplish assigned tasks.
Resolves routine questions and problems, refers complex issues to others.
Demonstrates an awareness of the relative urgency of tasks and responds accordingly.
Knowledge and Skills
Must have basic math skills to include addition, subtraction, and multiplication.
Basic reading and writing.
Able to work in a hot, dusty environment while wearing appropriate PPE.
Must have the ability to communicate with machine operator, co-workers, shift lead, and supervisor
Education
High School Diploma or GED equivalent
Physical Requirements / Working Environment
Must be able to perform essential responsibilities with or without reasonable accommodations.
**Will be in a non-climate controlled environment and will be exposed to fiberglass daily and regularly***
-
Die Cut Operator
3 months ago
Houston, United States NESC Staffing Full time5-7 days per week Position SummaryThe position of Die Cut Machine operator is to run one of the three Die Cut lines, follow established procedures, and set-up. The Die Cut Operator tends to the daily operation and daily run schedule to ensure product is made with high quality and on time. Also performs minor repairs or adjustments to machine settings to...
-
Cut-To-Length Helper
3 months ago
Houston, United States SPS Full timeWhat is a Cut-to-Length Helper? Our product (steel) comes in big coils. Our customers usually need steel that’s flat, so we use a Cut-To-Length machine to decoil the steel and cut it to meet customer needs. This position helps Cut-To-Length Operators safely load steel onto machines, decoil it, and cut it into sheets. This position helps the company...
-
Die Cutter
3 months ago
Houston, United States ResourceMFG Full timesummary Printing plant in Durham, NC needs DIE Cutters ASAP! Shift: 2/2/3 Schedule 7am to 7pm and 7pm to 7am 2 Shift Available $22-25.25/hr Based on Experience, must show in Resume Primary responsibilities: Machine setup Die-cutting operation following operational and safety procedures Troubleshooting process Inspecting product to specifications to meet...
-
Printing Press Helper
3 months ago
Houston, United States Smurfit Kappa Group - US Full timeJob DescriptionJob Description2nd shift(1:30 pm – 10 pm)Responsible for assisting the operator in all activities associated with running the printing press including setup, operation, cleanup, and recommending improvements to operations.Primary DutiesLearn relevant local and company requirements, rules and procedures. Strictly follows rules and guidelines...
-
Carpenters Helper
4 weeks ago
Houston, United States Staff Time Professional LLC Full timeJob DescriptionJob DescriptionEast Houston employer is looking for carpenter helpers with own basic tools with the ability to work 10-12 hour shifts with weekend work .This position has mandatory overtime that is required to work. All carpenter hepers must be able to carry duties but not limited to assist leading carpenter with cuts & measurements along with...
-
Technical Sales Engineer
3 months ago
Houston, United States Seco Tools Full timeTechnical Sales Engineer - Cutting Tools in Houston, TX areaSeco Tools is seeking a results-driven Regional/Territory Technical Sales Professional for the Houston, TX area to join our team. The ideal candidate will have a solid background in technical sales, with expertise in the medical and aerospace industries. As a Regional/Territory Sales Professional,...
-
CNC Machinist Helper
2 months ago
Houston, United States ARIA Signs and Design, LLC Full timeJob DescriptionJob DescriptionAria Signs and Design is a top-tier architectural signage manufacturer and we are looking for a FRIENDLY, PUNCTUAL, and RELIABLE individual to join our team of Shop Helpers. This is an entry level position that will require candidates to perform various tasks including maintaining areas around all of the CNC machines, keeping...
-
Grafoil Facer
4 weeks ago
Houston, United States Lamons (LGC EmployeeCo., LLC) Full timeJob DescriptionJob DescriptionJob SummarySets up and operates Grafoil Punch Press machine. Applies Grafoil, Teflon or Mica to face of gaskets. May use tape measure. Keeps area clean. May perform other duties as assigned by Supervisor.Job Duties and ResponsibilitiesReceives gaskets to apply Grafoil/Teflon facing to gaskets. Retrieves gasket material, as...
-
Grafoil Facer
4 weeks ago
Houston, United States Lamons (LGC EmployeeCo., LLC) Full timeJob DescriptionJob DescriptionJob SummarySets up and operates Grafoil Punch Press machine. Applies Grafoil, Teflon or Mica to face of gaskets. May use tape measure. Keeps area clean. May perform other duties as assigned by Supervisor.Job Duties and ResponsibilitiesReceives gaskets to apply Grafoil/Teflon facing to gaskets. Retrieves gasket material, as...
-
Lead Converting Operator
1 month ago
Houston, United States Spark Packaging Full timeJob DescriptionJob DescriptionPosition: Lead Converting Operator Location: Houston, TX Position Summary:The Lead Converting Operator will be directly responsible for running the line and directing the work of the Machine Operators and Assistants to ensure smooth operation and the highest quality of products. Position Responsibilities:Set up the flexo folder...
-
Custom Wood Shop Helper
1 month ago
Houston, United States Wheels & Feels Full timeJob DescriptionJob DescriptionRequirements - Remove assembly parts from the cut table for sanding. - Keeping parts and areas organized and clean. - Sanding of parts produced in the area daily. - Cut carpet from patterns as required by the order. - Provide Quality parts processed in the area. - Utilizing electric sanders, saws, and scissors. -...
-
Welder 1st and 2nd Shifts
1 month ago
Houston, United States ResourceMFG Full timesummary 1st and 2nd ShiftsResourceMFG is immediately hiring experienced Aluminum and Steel Welders on 1st and 2nd shifts for a premier manufacturing company in Randleman!!These are career opportunities with great pay, benefits and growth opportunities. Shift and Pay for this Welder Position: 1st Shift Monday - Friday, 6:00am - 2:30pm $23.00hr 2nd shift...
-
Metal Shop Helper
4 weeks ago
Houston, United States Houston Custom Metal Works LLC Full timeJob DescriptionJob DescriptionWe need some help in all areas of a metal shop. Preparing raw materials, moving stuff around, going to customer sites to install, and helping keep the shop in good order are all things we need help with.Requirements:Comfortable in shop environment.Understanding of safety practices.Ability to accurately read a tape measure to...
-
Production Operator
1 month ago
Houston, United States VAM USA Full timeJob DescriptionJob DescriptionKey Responsibilities include:Apply thread lubricant or storage compound to threads, as required. Apply proper thread protectors to finished threads to prevent damage.Operate cut-off saw to cut off pipe ends or rejected threads as directed.Operate swaging equipment as directed.Manually drifts pipe as required. Perform shop...
-
Production Operator
3 months ago
Houston, United States VAM USA Full timeJob DescriptionJob DescriptionKey Responsibilities include:Apply thread lubricant or storage compound to threads, as required. Apply proper thread protectors to finished threads to prevent damage.Operate cut-off saw to cut off pipe ends or rejected threads as directed.Operate swaging equipment as directed.Manually drifts pipe as required. Perform shop...
-
Apprentice Electrician
1 month ago
Houston, United States Optimized Personnel Solutions Full timeJob DescriptionJob DescriptionPreferred minimum of 6 months documented field experience in chosen craft discipline. Must have the ability to read and interpret instructions and documentation. The level and degree of job responsibilities and requirements vary depending on months of experience and assigned. Helpers primarily assist in these activities.Assist...
-
Commercial Plumber
3 weeks ago
Houston, United States Optimized Personnel Solutions Full timeJob DescriptionJob DescriptionLooking for hardworking, knowledgeable commercial plumber. To install commercial plumbing on small to large-scale commercial jobs including restaurants, retail, warehouses, hotels, some multi-family, and much more. Lead a team and perform all duties for all stages of the jobs from the ground up. Responsibilities:Commercial...
-
Commercial Plumber
2 months ago
Houston, United States Optimized Personnel Solutions Full timeJob DescriptionJob DescriptionLooking for hardworking, knowledgeable commercial plumber. To install commercial plumbing on small to large-scale commercial jobs including restaurants, retail, warehouses, hotels, some multi-family, and much more. Lead a team and perform all duties for all stages of the jobs from the ground up. Responsibilities:Commercial...
-
CNC Operator
2 months ago
Houston, United States Core and Main Full timeCompany Overview: About Core & Main Based in St. Louis, Core & Main is a leading distributor of water, sewer, storm drain and fire protection products in the United States. Operating approximately 320 branches nationwide, the company combines local expertise with a national supply chain to provide contractors and municipalities innovative solutions for new...
-
Burner
1 day ago
Houston, United States The Reserves Network Inc Full timeJob DescriptionJob DescriptionBurner 2nd Shift | $24 to $27 an hour | Monday through Friday 530pm to 5am What Matters MostCompetitive pay rate of $24 to $27 an hour based on experience Schedule: 2nd Shift; Monday through Friday 530pm to 5am Location: North Houston | Aldine and Northline area Temporary-to-hire opportunity with career growth and...