Maintenance Technician

2 months ago

Romulus, United States EmployBridge Full time

2nd Shift (2:00 p.m. - 10:30 p.m.)
3rd Shift (10:00 p.m. - 6:30 a.m.)

Pay - No Journeyman's Card: $35.44 per hr. 4% pay raise after 1,000 hours worked. Will reach top rate ($38.52) after an additional 1,000 hours worked.

Pay - with Journeyman's Card: $38.52

Shift premium: 35 cents per hr. for 2nd shift and 45 cents per hr. for 3rd shift

We are seeking Maintenance Technicians for 2nd and 3rd shift with auto manufacturing plant experience, skilled trades mechanical tech expertise with assembly lines and/or injection molding presses preferred. Assembly line trouble-shooting skills needed.

Job description
The primary role is to continually monitor production throughput and act accordingly to maintain optimal equipment utilization. Applies technical knowledge in determining equipment malfunctions, and applies skill in restoring equipment operations. Uses software programs and testing equipment to diagnose malfunctions. Applies reliability and maintainability data to determine proactive improvements to production equipment. Performs all work in accordance with established safety procedures, ensures compliance with engineering specifications and/or codes. Duties may include but are not limited to:
Tasks:
Diagnostic, analysis, trouble shooting of vacuum pumps , chemical feed pumps, Aquatrac chemical controllers for water systems, sand filters, Adams strainers, Harmsco filters, if not part of landlord equipment or service
Complete preventative maintenance tasks for make up air units, supply and exhaust fans.
Repair door hardware such as lock sets, levers and door closers.
Diagnostic, analysis, trouble shooting of production equipment, if solution not found at team level
Fabricate and install hangers, straps, brackets, fixtures, anchors or other supports used in holding of supporting pipe, hose and tubing. (After initial installation)
Repair and install metal guarding. (after initial installation)
Repair and maintain all exhaust equipment used on production machines to include equipment hoods, ducts, stacks, blowers, louvers, squirrel cages, motor, belts, pulleys, bearings, shafts, and impellers. (after initial
Install and remove motors of one horsepower and larger. Unless covered by supplier contract or needs rigging
Install and replace ceiling tiles. (after initial installation)
Install, maintain, and repair valves and regulators for control of vacuum, air, water, and other gases.
Maintain, calibrate and repair helium test equipment
Install, maintain, and repair piping, tubing, hosing, pumps, hose reels, bladders, drinking fountains, pneumatic cylinders, air motors, lubricators, gas or fluid filters, lubricators, strainers, counter balancers, and separators.
Remove and install hydraulic pumps as required. (Pumps to be sent to manufacturer for repair) Install and or relocate all bins, pans, hoppers, tanks, guards, cabinets, lockers, booths, blowers, conveyors, part chutes, baskets, storage racks, ladders, cribs, cribbing metal building structures, guard rails. (after initial
Maintain all conveyor systems. (after initial installation)
Maintain and repair all track, slides, shuttles, turntables, hold downs.
Maintain drive belts, pulleys, drive chains, sprockets, bearings and drive couplings.
Install machine bases, including fabrication and installing reinforcement rods, anchor bolts, and pad removal and repair. (after initial installation) Perform welding, burning and cutting duties as directed
Repair production machine tool equipment in tool room; including maintaining and replacing chains, sprockets, sheaves, pulleys, belts, clutches, and gears as needed Repair pneumatic tools, staple guns, air power hand tools to include grinders, drills, rivet guns, and impacts (if not covered under supplier service or warranty)
Assist if necessary in transport, install, remove, of office equipment.
Will hang signs on production floor.
Will install, maintain, and repair cribbing. (After initial installation)
Writes own programs for CNC equipment to include CAD/CAM.
Will hang signs on production floor.
Will install, maintain, and repair cribbing. (After initial installation)
Assistor be assisted by other trades as particular skills are required
Required skills as they relate to SRP job descriptions Pipefitters, Millwrights, Welders, Industrial Truck Repair, Machine Repair, Power Services &any other mechanical related skilled trades.

Job Type: Full-time
Benefits:

  • 401(k)
  • 401(k) matching
  • Dental insurance
  • Employee assistance program
  • Employee discount
  • Flexible spending account
  • Health insurance
  • Life insurance
  • Paid time off
  • Referral program
  • Tuition reimbursement
  • Vision insurance

Schedule:

  • 8 hour shift
  • Monday to Friday
  • Overtime
  • Weekends as needed

Work Location: In person

  • Maintenance Technician

    12 hours ago

    Romulus, Michigan, United States Aerotek Full time

    Aerotek Job DescriptionJob Title: Maintenance TechnicianJob Summary:We are seeking a skilled Maintenance Technician to join our team at Aerotek. As a key member of our maintenance team, you will be responsible for performing a wide variety of tasks to ensure the smooth operation of our equipment.Key Responsibilities:Perform routine maintenance and repairs on...

  • Residential Maintenance Technician

    2 months ago

    Romulus, United States ISG Full time

    Job DescriptionJob DescriptionA national company with a facility in the Romulus, MI area is currently seeking several Residential Maintenance Technicians for Direct Hire opportunities with their growing team. These are exciting opportunities for Residential Maintenance Technicians looking for a company that offers excellent management, development, training,...

  • Residential Maintenance Technician

    2 months ago

    Romulus, United States ISG Full time

    Job DescriptionJob DescriptionA national company with a facility in the Romulus, MI area is currently seeking several Residential Maintenance Technicians for Direct Hire opportunities with their growing team. These are exciting opportunities for Residential Maintenance Technicians looking for a company that offers excellent management, development, training,...

  • Maintenance Technician

    1 month ago

    Romulus, United States Delta Hotels by Marriott - Detroit Metro Airport Romulus, MI Full time

    Job DescriptionJob Description$19 Hour. Full Time. Open flexibility.We’re looking for a hardworking maintenance technician to join our team! You’ll make sure our facilities are operating efficiently, regularly inspect our building for any damage, and conduct routine maintenance on our equipment to keep it running smoothly. The ideal person for this job...

  • Maintenance Technician

    2 months ago

    Romulus, United States Delta Hotels by Marriott - Detroit Metro Airport Romulus, MI Full time

    Job DescriptionJob Description$19 Hour. Full Time. Open flexibility.We’re looking for a hardworking maintenance technician to join our team! You’ll make sure our facilities are operating efficiently, regularly inspect our building for any damage, and conduct routine maintenance on our equipment to keep it running smoothly. The ideal person for this job...

  • Maintenance Technician

    2 months ago

    Romulus, United States Magnuson Hotel - Detroit Airport Full time

    Job DescriptionJob DescriptionBenefits:Life Insurance401(k)Company partiesDental insuranceEmployee discountsHealth insuranceTraining & developmentVision insuranceKey Responsibilities:Report directly to the General Manager and collaborate with the maintenance team to ensure efficient operations.Conduct thorough surveys of buildings to identify and repair...

  • Maintenance Technician

    1 month ago

    Romulus, United States Magnuson Hotel - Detroit Airport Full time

    Job DescriptionJob DescriptionBenefits:Life Insurance401(k)Company partiesDental insuranceEmployee discountsHealth insuranceTraining & developmentVision insuranceKey Responsibilities:Report directly to the General Manager and collaborate with the maintenance team to ensure efficient operations.Conduct thorough surveys of buildings to identify and repair...

  • Maintenance Technician

    2 weeks ago

    Romulus, United States Yanfeng Automotive Full time

    The role of a Plant Maintenance Technician is to participate in the Total and Preventive Maintenance (TPM) for all equipment and facilities. Internal Essential functions of the job and specific requirements Install, repair and maintain all equipment and facilities Analyze mechanical and operational problems on assigned equipment and make necessary...

  • Maintenance Technician

    7 hours ago

    Romulus, Michigan, United States RHP Staffing Full time

    Job SummaryRHP Staffing is seeking a skilled Maintenance Technician to join our team at our Metro Commons community in Romulus, MI. As a key member of our maintenance team, you will be responsible for performing general grounds and lawn maintenance, as well as basic repairs to homes owned by the community.Key ResponsibilitiesPerform routine maintenance tasks...

  • Plant Maintenance Technician

    1 month ago

    Romulus, United States Manpower Full time

    Job DescriptionJob DescriptionOur client, A leading automotive supplier is seeking a Maintenance Technician to join their team. You will be part of the facility supporting the whole plant. The ideal candidate will have 3 years of industrial Maintenance experience.Job Title: Plant Maintenance Technician - 2nd Shift  Location: Romulus, MIPay Range: $25...

  • Plant Maintenance Technician

    2 weeks ago

    Romulus, United States Manpower Group Inc. Full time

    Our client, A leading automotive supplier is seeking a Maintenance Technician to join their team. You will be part of the facility supporting the whole plant. The ideal candidate will have 3 years of industrial Maintenance experience. Job Title: Plant Maintenance Technician - 2nd Shift Location: Romulus, MI Pay Range: $25 - $30/ hr. What’s the...

  • Plant Maintenance Technician

    3 months ago

    Romulus, United States Manpower Full time

    Our client, A leading automotive supplier is seeking a Maintenance Technician to join their team. You will be part of the facility supporting the whole plant. The ideal candidate will have 3 years of industrial Maintenance experience. Job Title: Plant Maintenance Technician - 2nd Shift   Location: Romulus, MI Pay Range: $25 - $30/hr.  What’s...

  • Maintenance Technician

    12 hours ago

    Romulus, Michigan, United States Wayne County Schools Employment Network Full time

    Job SummaryWe are seeking a skilled Maintenance Technician to join our team at Wayne County Schools Employment Network. The successful candidate will be responsible for performing a range of general maintenance tasks, including service, repair, and preventive maintenance of various equipment and infrastructure.Key ResponsibilitiesEffectively and efficiently...

  • Maintenance Technician

    15 hours ago

    Romulus, Michigan, United States Manpower Inc Full time

    Job Summary:We are seeking a skilled Maintenance Technician to join our team at Manpower Inc. as a 3rd shift maintenance technician. The successful candidate will be responsible for installing, repairing, and maintaining equipment to ensure optimal production and quality.Key Responsibilities:Equipment Installation and Repair: Install, repair, and maintain...

  • 3rd Shift Maintenance Technician

    2 weeks ago

    Romulus, United States Manpower Full time

    Position: Plant Maintenance Technician Location: Romulus, MI 3rd Shift $25 - $30/hr Responsibilities: Install, repair, and maintain equipment for optimal production and quality.Analyze and correct mechanical and operational issues.Conduct post-repair testing for equipment functionality.Record operational data for set-up and preventive maintenance.Contribute...

  • Maintenance Technician I

    2 weeks ago

    Romulus, United States KLS Logistics Services Inc Full time

    Hours are 4 pm to 12:30 am. Role Purpose: The Maintenance Technician is responsible for most major equipment repairs, upgrades, installations and changes related to the warehouse and packaging operations, including MHE repairs and PM's. This role will perform the quarterly, bi-annual and annual PMs as per schedule. This role will have assigned machines to...

  • Maintenance Technician

    3 weeks ago

    Romulus, United States Kroger Fulfillment Center Full time

    *Fulfillment Maintenance Tech JOB DESCRIPTION:*Responsible for maintaining and repairing equipment, buildings, and fixtures of the distribution center. Maintain lift trucks and keep them in good repair. The company also requires that all employees perform all tasks in a safe manner consistent with corporate policies and state and federal laws. Demonstrate...

  • Maintenance Supervisor

    2 months ago

    Romulus, United States Malace HR Full time

    Job DescriptionJob DescriptionMalace|HR is seeking an experienced Maintenance Supervisor to work onsite at an automotive manufacturer in Romulus, MI. As a Maintenance Supervisor you will be responsible for shift mechanics, electricians, and housekeepers. These technicians will be performing maintenance activities, such as troubleshooting/repairing facility...

  • Maintenance Professional

    1 week ago

    Romulus, Michigan, United States Sun Communities, Inc. Full time

    About the Role:Sun Communities, Inc. is seeking a skilled Maintenance Technician to join our team. As a Maintenance Technician, you will be responsible for providing a full range of maintenance and repair services for our manufactured housing communities.Key Responsibilities:Community Maintenance: Ensure the community is presentable, inviting, and adheres to...

  • Maintenance Technician

    7 days ago

    Romulus, Michigan, United States EmployBridge Full time

    Job SummaryEmployBridge is seeking a skilled Maintenance Technician to join our team. As a Maintenance Technician, you will be responsible for ensuring the optimal operation of our production equipment and maintaining a safe and efficient work environment.Key ResponsibilitiesMonitor production throughput and take corrective action to maintain optimal...