Welder

3 weeks ago

Batavia NY, Genesee County, NY, United States Graham Corporation and Subsidiaries Full time
Description

Position Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate.

Skills:

To perform the job successfully, an individual should demonstrate the following competencies:

1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site.

2. Strong organization and time management skills.

3. High attention to detail.

4. Demonstrate behavior consistent with company values.

5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture.

6. Exhibits polite and professional communication via phone, e-mail and mail.

7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan.

8. Maintain a collaborative relationship with internal and external stakeholders.

9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement.

10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention.

11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements.

12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals.

13. Ability to thrive in a team environment.

Physical and Mental Demands:

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors.

• Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure.

• Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.

Requirements

Qualifications:

To qualify for this position, an individual must possess the knowledge, training, experience and abilities required.

Education and Training:

• Technical Trades School in Welding

• High school GED Required

Experience:

• 1+ years of welding experience.

Other:

• Must be willing to work overtime as required.

• Minimal travel may be required

Work Authorization:

Must be able to work in the U.S without sponsorship.

  • Welder

    1 week ago

    Batavia, United States Beneficial Talent Source Full time

    Job DescriptionJob DescriptionEastside Cincinnati Metal Job Shop is seeking welders for 1st shift, M-F 6a-3:30p, (automatic 5 hours of OT every week!). Pay is based on weld assessment, $20-30 an hr.Must have previous job shop experience, be able to TIG weld stainless, mild steel sheet metal and light plate, able to read blueprints, layout and fit up. Need to...

  • Production Welder

    1 month ago

    Batavia, United States Big Tex Trailer Manufacturing, Inc. Full time

    Perform work in a professional and safe manner, report unsafe work practices. Capable of learning and understanding layout, assembly, and welding procedures. Complete and or understand reports including scrap, safety, quality, workorders, inventory, Welder, Production, Welding, Manufacturing, Fabrication

  • Welder

    3 days ago

    Batavia, United States Kable Staffing Full time

    Job DescriptionJob DescriptionKable Staffing is in urgent need of a Welder in Batavia, OH. This position is a full-time, Temp to Hire opportunity.FULL JOB DESCRIPTIONPRINCIPAL DUTIES & RESPONSIBILITIESClock orders in/out of profit fabVerification of punching to setup sheetsReading of job packet routersVisual inspection of partsREQUIREMENTSHigh School...

  • Welder - 2nd Shift

    4 days ago

    Batavia, United States Graham Corporation Full time

    This is position is 4 days a week, 10 hours a day, Monday through Thursday.Job Duties:Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly.Investigates special welding instructions to conform to Quality Assurance requirements.Slag work;...

  • Welder 1st Shift

    1 month ago

    Batavia, United States Kable Staffing Full time

    Job DescriptionJob DescriptionKable Staffing is hiring Welder in Batavia, OH. This position is a full-time, temp to hire opportunity.FULL JOB DESCRIPTIONPRINCIPAL DUTIES & RESPONSIBILITIESSafe and efficient operation of equipment.Excellent blueprint and fit-up skills.Excellent TIG welding skills with sheet metal and light plate.Perform all required quality...

  • Welder - 2nd Shift

    5 days ago

    Batavia, United States Graham Corporation Full time

    This is position is 4 days a week, 10 hours a day, Monday through Thursday.Job Duties:Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. Investigates special welding instructions to conform to Quality Assurance requirements. Slag work;...

  • Welder - 2nd Shift High Bay

    2 days ago

    Batavia, United States Graham Corporation Full time

    Job Duties:Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly.Investigates special welding instructions to conform to Quality Assurance requirements.Slag work; examines weld for size of bead, penetration and quality continuous code...

  • Mig Welder

    4 days ago

    Batavia, United States Kable Staffing Full time

    Job DescriptionJob DescriptionMIG WELDERROLE RUNDOWNThe candidate will require a minimum of 1 year experience or attended a trade school for welding mild or structural steel using gas metal arc welding (GMAW/ MIG) and flux cored arc welding (FCAW) welding methods. The ability to weld in at least one of the following weld positions is a must (flat,...

  • Welder - 2nd Shift High Bay

    10 hours ago

    Batavia, United States Graham Corporation Full time

    Job Duties:Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. Investigates special welding instructions to conform to Quality Assurance requirements. Slag work; examines weld for size of bead, penetration and quality continuous code...

  • Welder

    3 weeks ago

    Batavia, United States BuildSubmarines.com Full time

    Description Position Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production...

  • Welder

    4 days ago

    Batavia, United States Marmon Holdings, Inc. Full time

    Ellis & Watts Global Industries IncCome join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.About us ...Ellis & Watts solve...

  • Welder

    2 weeks ago

    Batavia, United States Graham Corporation and Subsidiaries Full time

    DescriptionPosition Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production...

  • Welder

    3 weeks ago

    Batavia, United States Graham Corporation and Subsidiaries Full time

    Job DescriptionJob DescriptionDescription:Position Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications....

  • Welder

    5 days ago

    Batavia, United States Marmon Holdings, Inc. Full time

    Ellis & Watts Global Industries IncCome join a team where People make the difference! As a part of Marmon Holdings, Inc., a highly decentralized organization, we rely heavily on people with the aptitude, attitude, and entrepreneurial spirit to drive our success, and we're committed to attracting and retaining top talent.About us ...Ellis & Watts solve...

  • Press Brake Operator

    3 days ago

    Batavia, United States Kable Staffing Full time

    Job DescriptionJob DescriptionPRESS BRAKE OPERATORKable Staffing is in urgent need of a Press Brake Operator in Batavia, OH. This position is a full-time, temp to hire opportunity. ROLE RUNDOWNAs a Metal Fabricator and Welder, you'll be at the heart of creating structures that stand the test of time. This role offers a dynamic blend of creativity,...

  • Maintenance Mechanic

    5 days ago

    Batavia, United States Graham Corporation and Subsidiaries Full time

    DescriptionPosition Summary: The Maintenance Mechanic is responsible for routine and unexpected maintenance, troubleshooting and repair of the facilities and equipment at Graham. This includes buildings and grounds, mobile equipment, fixed machines and equipment, mobile machinery and a range of powered and hand tools. The employee reports to the Lead...

  • Maintenance Mechanic

    4 days ago

    Batavia, United States Graham Corporation and Subsidiaries Full time

    DescriptionPosition Summary: The Maintenance Mechanic is responsible for routine and unexpected maintenance, troubleshooting and repair of the facilities and equipment at Graham. This includes buildings and grounds, mobile equipment, fixed machines and equipment, mobile machinery and a range of powered and hand tools. The employee reports to the Lead...

  • Maintenance Mechanic

    4 days ago

    Batavia, United States Graham Corporation and Subsidiaries Full time

    Job DescriptionJob DescriptionDescription:Position Summary: The Maintenance Mechanic is responsible for routine and unexpected maintenance, troubleshooting and repair of the facilities and equipment at Graham. This includes buildings and grounds, mobile equipment, fixed machines and equipment, mobile machinery and a range of powered and hand tools. The...

  • CNC Mill Operator

    4 days ago

    Batavia, United States Graham Corporation and Subsidiaries Full time

    Job DescriptionJob DescriptionDescription:Position Summary: 1st shift Lay out, cut or trim parts or components to dimension, contour or bevel as specified by drawings, bills of material, or oral instructions, using flame cutting plasma arc torch. Key Results Areas by level of workLevel I: Quality – Complete and accurate work performed efficiently1....

  • Project Engineer

    2 weeks ago

    Batavia, United States Graham Corporation and Subsidiaries Full time

    Job Description Job Description Description: Position Summary: This position is familiar with multiple product lines but may focus on one product line to develop product expertise and works independent with some supervision of work. Has successfully managed some medium specification projects that shipped and/or made some sales calls or presentations...