CMM Programmer/Inspector

7 days ago

Wichita, Kansas, United States Max Aerostructures LLC Full time

Develop part programs, part holding designs, AS9102 First Article set up, program operation instructions and best practice guidelines for various Coordinate Measuring Machines (CMM) systems based on customer specifications. Monitor and measure quality on close tolerance aerospace machined, metal parts and components in a production environment. Inspectors are responsible in-process, 1st part, and final dimensional inspection of parts and assemblies. Train and mentor inspection personnel on equipment setup and operation.

Primary Duties Include:

  • Review planning, engineering drawings, and digital models to determine proper dimensions and tolerance specifications for specific parts and/or tools to be measured
  • Create automated CMM programs offline
  • Create programs following a priority list to work ahead of schedule
  • Develop software inspection programs which are intended for repeated use to inspect geometrically defined components and associated fixturing.
  • Work directly with Manufacturing Engineer/Quality Engineer resources to determine inspection criteria as well as best practice inspection techniques.
  • Operate measurement equipment to perform CMM trials on newly developed part programs and prepare them for production use readiness.
  • Run CMM programs and perform inspection duties in a production environment.
  • Writing of non-conformance rejection tags.
  • Able to prove out and measure new machine fixtures and tooling for approval or required changes.
  • Approves part specifications and dimensions using hard layout methodologies.
  • Ability to document work instructions and process documentation.
  • Accurately manage CMM programs and other inspection documentation, using master programs and documents.
  • Develop custom inspection data reports based on specific customer or engineering requests, to include the setup of AS9102 First Articles / Net-Inspect.
  • Interfaces directly with the Manufacturing Engineer/Quality Engineer or manufacturing personnel to accurately explain measurement data obtained from the inspection process in order to provide clear assessment of inspection result.
  • Train inspection personnel on correct usage of CMM equipment, GD&T interpretation, part programs, and maintenance
  • Maintain compliance with program development, change management, and validation procedures and best practices.
  • Perform manual dimensional check as needed to verify questionable results
  • Identify and participate in continuous improvement projects
  • Communicate effectively (verbal and written) with all customers, internal/external
  • Accept and adapt easily to change
  • Ensure that all activities are consistent with Company Mission Statement
  • Operate job-related equipment with or without assistance
  • Perform other duties as assigned

The ideal candidate will have the following qualifications:

  • Understands Geometric Dimensioning & Tolerance concepts (of ASME Y14.5:2009 & ISO 1101:2012) and is able to appropriately apply the techniques to the inspection process.
  • Working knowledge creating CMM programs using PCDMIS HP-L10.6 scan head technology
  • Ability to program and operate PCMM's with Verisurf
  • Experience with the use of tactile scan probing technology
  • Interrogate Catia models, when necessary
  • Model up fixturing for CMM programs
  • Able to read, understand, and interprets blueprints and other technical documentation
  • Strong mathematical skills and experience with solving simple trigonometry based formulas
  • Working knowledge of manufacturing processes, CNC equipment, complex machined aerospace parts, quality standards and rework processes
  • Ability to take initiative, including asking for and offering help when needed, and perform work independently without being prompted
  • Ability to manage competing priorities, prioritize and plan work activities, use time efficiently, and work within deadlines
  • Well-developed presentation preparation and delivery skills
  • Flexibility to work evenings or weekends and travel as needed (less than 5% of time)
  • Must have problem solving skills and work well under quick turnaround production demands.
  • Preferred candidates will have at least 5 years of advanced dimensional inspection experience in the aerospace industry.
  • Positive attitude
  • Team player
  • Sense of urgency

  • Tooling Inspector

    11 hours ago

    Wichita, Kansas, United States The Atlas Group Full time

    This job was posted by : For moreinformation, please see: The Tooling Inspector is responsible for conducting periodic toolinginspections (PTIs) to verify the accuracy and compliance of aerospacetooling. This role uses advanced metrology equipment and software,including Spatial Analyzer (SA) and PolyWorks, to ensure tooling remainsprecise, functional, and...

  • Quality Inspector

    37 minutes ago

    Wichita, Kansas, United States Leading Technology Composites Full time

    Quality Inspector - 1st ShiftJob DescriptionResponsible for ensuring the product manufactured meets or exceeds customer requirements through the verification of compliance to drawing, standards, specifications, or other contractual documents; and when applicable, first article inspection.Review production job order for completion and required information.Be...

  • Aerospace CMM Programmer

    2 weeks ago

    Wichita, KS, United States Trigo Group Full time

    Position Summary: Under general supervision and reporting to the Director of Quality Operations, the CMM Programmer is responsible for the day-to-day operation of a CMM to ensure that products meet quality standards and specifications. Potential of Relocation Bonus- (Onsite Baltimore or Fort Worth) Essential Functions: The essential functions include, but...

  • Aerospace CMM Programmer

    2 weeks ago

    Wichita, KS, United States Trigo Group Full time

    Position Summary: Under general supervision and reporting to the Director of Quality Operations, the CMM Programmer is responsible for the day-to-day operation of a CMM to ensure that products meet quality standards and specifications. Potential of Relocation Bonus- (Onsite Baltimore or Fort Worth) Essential Functions: The essential functions include, but...

  • Aerospace CMM Programmer

    1 week ago

    Wichita, KS, United States Trigo ADR Americas Full time

    Position Summary: Under general supervision and reporting to the Director of Quality Operations, the CMM Programmer is responsible for the day-to-day operation of a CMM to ensure that products meet quality standards and specifications.         75% onsite, 25% remote programming. Travel periodically to other locations. Ideal candidate will have...

  • Aerospace CMM Programmer

    1 week ago

    Wichita, KS, United States Trigo Group Full time

    Position Summary: Under general supervision and reporting to the Director of Quality Operations, the CMM Programmer is responsible for the day-to-day operation of a CMM to ensure that products meet quality standards and specifications. 75% onsite, 25% remote programming. Travel periodically to other locations. Ideal candidate will have extensive knowledge...

  • Aerospace CMM Programmer

    7 days ago

    Wichita, KS, United States Trigo ADR Americas Full time

    Position Summary: Under general supervision and reporting to the Director of Quality Operations, the CMM Programmer is responsible for the day-to-day operation of a CMM to ensure that products meet quality standards and specifications.         75% onsite, 25% remote programming. Travel periodically to other locations. Ideal candidate will have...

  • Aerospace CMM Programmer

    7 days ago

    Wichita, KS, United States Trigo Group Full time

    Position Summary: Under general supervision and reporting to the Director of Quality Operations, the CMM Programmer is responsible for the day-to-day operation of a CMM to ensure that products meet quality standards and specifications. 75% onsite, 25% remote programming. Travel periodically to other locations. Ideal candidate will have extensive knowledge...

  • Aerospace CMM Programmer

    2 weeks ago

    Wichita, KS, United States Trigo ADR Americas Full time

    Position Summary: Under general supervision and reporting to the Director of Quality Operations, the CMM Programmer is responsible for the day-to-day operation of a CMM to ensure that products meet quality standards and specifications.         Potential of Relocation Bonus- (Onsite Baltimore or Fort Worth)                              ...

  • Aerospace CMM Programmer

    1 week ago

    Wichita, KS, United States Trigo ADR Americas Full time

    Position Summary: Under general supervision and reporting to the Director of Quality Operations, the CMM Programmer is responsible for the day-to-day operation of a CMM to ensure that products meet quality standards and specifications.         75% onsite, 25% remote programming. Travel periodically to other locations. Ideal candidate will have...

  • Quality Inspector

    2 weeks ago

    Wichita, KS, United States gpac Full time

    Job Description Quality Inspector We are seeking a Quality Inspector skilled with FAI Inspection to join a growing, family-owned, aerospace manufacturer specializing in precision-machined and sheet-metal components. In this role, you’ll ensure that new and revised parts meet exacting engineering and customer specifications before entering production....

  • Quality Inspector

    7 days ago

    Wichita, United States Accurus Aerospace Corporation Full time

    Remote Status: On-Site Inspectors are key personnel in the Accurus Quality Department and their duties are integral to our overall quality management system and customer satisfaction. Inspectors perform inspections on newly received goods, work-in-process, and are responsible for final inspections of machined aerospace parts and assemblies to ensure...