Electrical Engineer

648146

At EMCORE, we're committed to attracting and nurturing diverse, high-performing talent who are passionate about their work. Our employees share a common purpose-supporting our customers' missions while pursuing their own professional growth. We foster an inclusive and engaging workplace culture where innovation, collaboration, and work-life balance thrive. Core to our values is a steadfast commitment to excellence, community engagement, and integrity in everything we do.

About EMCORE

EMCORE Corporation is a leading independent provider of advanced inertial navigation solutions for the aerospace, defense, commercial, and industrial sectors. As pioneers in fiber optic gyros, ring laser gyros, and MEMS technologies, we drive innovation across a wide range of navigation applications.

Electrical Engineer

Location: Concord, CA Job Type: Full Time Department: Engineering

Job Description:

We are seeking an Electrical Engineer to contribute to the design and development of advanced mixed-signal electronics used in high-precision navigation systems. The ideal candidate will have hands-on experience with circuit design, analysis, and troubleshooting, and be capable of taking ownership of sub-systems from concept through verification.

Key Responsibilities:

• Design and analyze analog and digital circuits for precision data acquisition and control systems.
• Develop schematics, support PCB layout, and validate performance through lab testing.
• Conduct simulations and worst-case analyses to verify compliance with requirements.
• Collaborate with mechanical, firmware, and systems engineers to ensure seamless integration.
• Participate in design reviews and assist in resolving design and production issues.
• Support documentation, test procedures, and design verification reports.

Qualifications:

• Bachelor's degree in Electrical Engineering.
• 2–5 years of experience in circuit design, testing, and product development.
• Proficiency with schematic and PCB design tools (Altium, OrCAD, or equivalent).
• Solid understanding of analog/digital fundamentals, signal integrity, and power distribution.
• Experience using lab equipment such as oscilloscopes, spectrum analyzers, and power supplies.
• Strong problem-solving, communication, and teamwork skills.

Preferred Skills:

• Familiarity with FPGA, MCU, or embedded system interfaces.
• Experience with SPICE, Simulink, or MATLAB for analysis and modeling.
• Exposure to MIL-STD or aerospace/defense hardware requirements.
• Knowledge in sensor systems, inertial navigation, or precision instrumentation.

If you're passionate about electrical design and ready to work on cutting-edge projects, we'd like to hear from you Apply today and be part of an innovative team.

At EMCORE, we're committed to attracting and nurturing diverse, high-performing talent who are passionate about their work. Our employees share a common purpose-supporting our customers' missions while pursuing their own professional growth. We foster an inclusive and engaging workplace culture where innovation, collaboration, and work-life balance thrive. Core to our values is a steadfast commitment to excellence, community engagement, and integrity in everything we do.

About EMCORE

EMCORE Corporation is a leading independent provider of advanced inertial navigation solutions for the aerospace, defense, commercial, and industrial sectors. As pioneers in fiber optic gyros, ring laser gyros, and MEMS technologies, we drive innovation across a wide range of navigation applications.

Electrical Engineer

Location: Concord, CA Job Type: Full Time Department: Engineering

Job Description:

We are seeking an Electrical Engineer to contribute to the design and development of advanced mixed-signal electronics used in high-precision navigation systems. The ideal candidate will have hands-on experience with circuit design, analysis, and troubleshooting, and be capable of taking ownership of sub-systems from concept through verification.

Key Responsibilities:

• Design and analyze analog and digital circuits for precision data acquisition and control systems.
• Develop schematics, support PCB layout, and validate performance through lab testing.
• Conduct simulations and worst-case analyses to verify compliance with requirements.
• Collaborate with mechanical, firmware, and systems engineers to ensure seamless integration.
• Participate in design reviews and assist in resolving design and production issues.
• Support documentation, test procedures, and design verification reports.

Qualifications:

• Bachelor's degree in Electrical Engineering.
• 2–5 years of experience in circuit design, testing, and product development.
• Proficiency with schematic and PCB design tools (Altium, OrCAD, or equivalent).
• Solid understanding of analog/digital fundamentals, signal integrity, and power distribution.
• Experience using lab equipment such as oscilloscopes, spectrum analyzers, and power supplies.
• Strong problem-solving, communication, and teamwork skills.

Preferred Skills:

• Familiarity with FPGA, MCU, or embedded system interfaces.
• Experience with SPICE, Simulink, or MATLAB for analysis and modeling.
• Exposure to MIL-STD or aerospace/defense hardware requirements.
• Knowledge in sensor systems, inertial navigation, or precision instrumentation.

If you're passionate about electrical design and ready to work on cutting-edge projects, we'd like to hear from you Apply today and be part of an innovative team.

At EMCORE, we're committed to attracting and nurturing diverse, high-performing talent who are passionate about their work. Our employees share a common purpose-supporting our customers' missions while pursuing their own professional growth. We foster an inclusive and engaging workplace culture where innovation, collaboration, and work-life balance thrive. Core to our values is a steadfast commitment to excellence, community engagement, and integrity in everything we do.

About EMCORE

EMCORE Corporation is a leading independent provider of advanced inertial navigation solutions for the aerospace, defense, commercial, and industrial sectors. As pioneers in fiber optic gyros, ring laser gyros, and MEMS technologies, we drive innovation across a wide range of navigation applications.

Electrical Engineer

Location: Concord, CA Job Type: Full Time Department: Engineering

Job Description:

We are seeking an Electrical Engineer to contribute to the design and development of advanced mixed-signal electronics used in high-precision navigation systems. The ideal candidate will have hands-on experience with circuit design, analysis, and troubleshooting, and be capable of taking ownership of sub-systems from concept through verification.

Key Responsibilities:

• Design and analyze analog and digital circuits for precision data acquisition and control systems.
• Develop schematics, support PCB layout, and validate performance through lab testing.
• Conduct simulations and worst-case analyses to verify compliance with requirements.
• Collaborate with mechanical, firmware, and systems engineers to ensure seamless integration.
• Participate in design reviews and assist in resolving design and production issues.
• Support documentation, test procedures, and design verification reports.

Qualifications:

• Bachelor's degree in Electrical Engineering.
• 2–5 years of experience in circuit design, testing, and product development.
• Proficiency with schematic and PCB design tools (Altium, OrCAD, or equivalent).
• Solid understanding of analog/digital fundamentals, signal integrity, and power distribution.
• Experience using lab equipment such as oscilloscopes, spectrum analyzers, and power supplies.
• Strong problem-solving, communication, and teamwork skills.

Preferred Skills:

• Familiarity with FPGA, MCU, or embedded system interfaces.
• Experience with SPICE, Simulink, or MATLAB for analysis and modeling.
• Exposure to MIL-STD or aerospace/defense hardware requirements.
• Knowledge in sensor systems, inertial navigation, or precision instrumentation.

If you're passionate about electrical design and ready to work on cutting-edge projects, we'd like to hear from you Apply today and be part of an innovative team.

At EMCORE, we're committed to attracting and nurturing diverse, high-performing talent who are passionate about their work. Our employees share a common purpose-supporting our customers' missions while pursuing their own professional growth. We foster an inclusive and engaging workplace culture where innovation, collaboration, and work-life balance thrive. Core to our values is a steadfast commitment to excellence, community engagement, and integrity in everything we do.

About EMCORE

EMCORE Corporation is a leading independent provider of advanced inertial navigation solutions for the aerospace, defense, commercial, and industrial sectors. As pioneers in fiber optic gyros, ring laser gyros, and MEMS technologies, we drive innovation across a wide range of navigation applications.

Electrical Engineer

Location: Concord, CA Job Type: Full Time Department: Engineering

Job Description:

We are seeking an Electrical Engineer to contribute to the design and development of advanced mixed-signal electronics used in high-precision navigation systems. The ideal candidate will have hands-on experience with circuit design, analysis, and troubleshooting, and be capable of taking ownership of sub-systems from concept through verification.

Key Responsibilities:

• Design and analyze analog and digital circuits for precision data acquisition and control systems.
• Develop schematics, support PCB layout, and validate performance through lab testing.
• Conduct simulations and worst-case analyses to verify compliance with requirements.
• Collaborate with mechanical, firmware, and systems engineers to ensure seamless integration.
• Participate in design reviews and assist in resolving design and production issues.
• Support documentation, test procedures, and design verification reports.

Qualifications:

• Bachelor's degree in Electrical Engineering.
• 2–5 years of experience in circuit design, testing, and product development.
• Proficiency with schematic and PCB design tools (Altium, OrCAD, or equivalent).
• Solid understanding of analog/digital fundamentals, signal integrity, and power distribution.
• Experience using lab equipment such as oscilloscopes, spectrum analyzers, and power supplies.
• Strong problem-solving, communication, and teamwork skills.

Preferred Skills:

• Familiarity with FPGA, MCU, or embedded system interfaces.
• Experience with SPICE, Simulink, or MATLAB for analysis and modeling.
• Exposure to MIL-STD or aerospace/defense hardware requirements.
• Knowledge in sensor systems, inertial navigation, or precision instrumentation.

If you're passionate about electrical design and ready to work on cutting-edge projects, we'd like to hear from you Apply today and be part of an innovative team.

At EMCORE, we're committed to attracting and nurturing diverse, high-performing talent who are passionate about their work. Our employees share a common purpose-supporting our customers' missions while pursuing their own professional growth. We foster an inclusive and engaging workplace culture where innovation, collaboration, and work-life balance thrive. Core to our values is a steadfast commitment to excellence, community engagement, and integrity in everything we do.

About EMCORE

EMCORE Corporation is a leading independent provider of advanced inertial navigation solutions for the aerospace, defense, commercial, and industrial sectors. As pioneers in fiber optic gyros, ring laser gyros, and MEMS technologies, we drive innovation across a wide range of navigation applications.

Electrical Engineer

Location: Concord, CA Job Type: Full Time Department: Engineering

Job Description:

We are seeking an Electrical Engineer to contribute to the design and development of advanced mixed-signal electronics used in high-precision navigation systems. The ideal candidate will have hands-on experience with circuit design, analysis, and troubleshooting, and be capable of taking ownership of sub-systems from concept through verification.

Key Responsibilities:

• Design and analyze analog and digital circuits for precision data acquisition and control systems.
• Develop schematics, support PCB layout, and validate performance through lab testing.
• Conduct simulations and worst-case analyses to verify compliance with requirements.
• Collaborate with mechanical, firmware, and systems engineers to ensure seamless integration.
• Participate in design reviews and assist in resolving design and production issues.
• Support documentation, test procedures, and design verification reports.

Qualifications:

• Bachelor's degree in Electrical Engineering.
• 2–5 years of experience in circuit design, testing, and product development.
• Proficiency with schematic and PCB design tools (Altium, OrCAD, or equivalent).
• Solid understanding of analog/digital fundamentals, signal integrity, and power distribution.
• Experience using lab equipment such as oscilloscopes, spectrum analyzers, and power supplies.
• Strong problem-solving, communication, and teamwork skills.

Preferred Skills:

• Familiarity with FPGA, MCU, or embedded system interfaces.
• Experience with SPICE, Simulink, or MATLAB for analysis and modeling.
• Exposure to MIL-STD or aerospace/defense hardware requirements.
• Knowledge in sensor systems, inertial navigation, or precision instrumentation.

If you're passionate about electrical design and ready to work on cutting-edge projects, we'd like to hear from you Apply today and be part of an innovative team.

648146