Press Operator

3 days ago

Grand Rapids, Michigan, United States Boyd Full time $40,000 - $70,000 per year

Job Description:

Essential Duties Include:

  • Read and understand "Change Spec. Card Procedure"
  • Read and understand "Non-Conforming Product Procedure"
  • Get magnets from magnet board that contains the work order information for production
  • Locate pallet or cart with the WOR folder containing the corresponding material, work order numbers and instructions
  • Determine and obtain the correct tool for the job identified on the Spec. Card from the tooling rack
  • Remove tooling from box, attach bearer blocks and slide into tooling station
  • Set the machine for the appropriate job
  • Retain Supplier raw material tag with lot # and run # information along with "Approved for Use" tags on separate sheet of paper (if only using partial material and retuning excess material do not retain tag, just record part #, lot # and run # on sheet)
  • Complete "Sign-off Check List" (if operator has less than 1-year experience, needs sign-off from experienced operator with over 1 year experience)
  • Print out (core tags or box tags) along with 1st piece and last piece labels with correct information,
  • Make sure the right material is used where needed, to the proper side of the liner and in the right orientation
  • Place material in machine.  Feed it through the fife guide and adjust it for center run.
  • Place adhesive in machine and line-up with materials so that they are even with each other
  • Start machine, adjust tension and alignment as needed
  • Pass the material through to the die cutting station
  • Remove any waste or air-injection from the tool
  • Adjust nip-roller speed for proper speed and dimensions of part
  • Verify part to print and or mylar and record dimensions
  • Retain first approved piece and place label on back side
  • Complete In-Process check sheet during the run.
  • Complete End-of-Run sign off confirming the required parts were produced.
  • Retain last approved piece and label back side
  • Maintain a clean and safe work area, cleaning floor, machine, work area at end of each job and at end of shift
  • Cut cores for particular jobs when needed.  Obtain boxes and materials necessary for job
  • Operate production equipment to produce good, quality product in an efficient/quality-oriented manner.
  • Makes suggestions for ways to improve production process
  • Works with sales and estimating to test/run samples for new product introduction
  • Makes sure product being produced matches the spec card and the degree of quality needed (tolerances etc..)
  • Updates spec card for future runs when process is changed
  • Observe machine operation to detect workpiece defects or machine malfunctions; adjust machines as necessary.
  • Change worn machine accessories such as cutting tools and brushes, using hand tools.
  • Perform minor machine maintenance, such as oiling or cleaning machines, changing filters or adding lubricant to the Rotary press when necessary.
  • Notify supervisors when major service is required.
  • Other duties as assigned.

Education:

High school diploma or equivalent

All Job Posting Locations (Location)

Grand Rapids

Remote Type

On-Site

EEO Statement

Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

  • Press Operator Apprentice- 2nd Shift

    3 days ago

    Grand Rapids, Michigan, United States e5-9cbe-4cf7-b696-ca1fa06429ab Full time $43,000 - $58,000 per year

    Advance Your Career Through Hands-On Printing ExcellenceAre you a mechanically inclined, eager-to-learn individual ready to start your journey in the printing industry? At Our Daily Bread Ministries, we're more than a global content organization—we're a ministry dedicated to making the life-changing wisdom of the Bible understandable and accessible to all....

  • Automatic Press Operator Trainee

    3 days ago

    Grand Rapids, Michigan, United States Pridgeon and Clay Inc. Full time $40,000 - $60,000 per year

    1st shift: 6:30am-4:30pm M-TH, OT AvailableAre you looking for a challenging yet rewarding job that allows you to utilize your skills to their fullest potential? Do you want to join a team of hardworking, enthusiastic and creative people and enjoy working with a company that recognizes and embraces diversity? Do you take pride working with a company that is...

  • Secondary Press Operator- 3rd shift

    23 hours ago

    Grand Rapids, Michigan, United States Challenge Manufacturing Full time

    Who We Are:Challenge Manufacturing's mission is to manufacture with operational excellence by empowering our employee-owners. As a leading tier 1 supplier of complex metal assemblies for the global automotive industry, we drive innovative solutions for future mobility. We believe the best ideas come from individual unique perspectives. These ideas combined...

  • Printing-Offset Press Operator/Helper 2nd Shift

    7 days ago

    Grand Rapids, Michigan, United States Pageworks Full time $57,600 - $72,800 per year

    Pageworks is a progressive and growing commercial printing company in Grand Rapids area. We are looking for a conscientious offset printing press operator/2nd Pressman who takes pride in his or her work and who is dedicated to service and quality.Ideal candidates will have at least 1 Year experience in offset printing as an operator, experience on full size...

  • Experienced (only) Brake Press Operator

    5 days ago

    Grand Rapids, Michigan, United States Metal Components Full time $42,000 - $72,000 per year

    Metal Components is a start-to- finish sheet metal and tube processing company located in the South End of Grand Rapids Michigan. With a focus on quality, we utilize our engineering, fabrication capabilities and our attention to continuous improvement to serve an array of industries such as furniture, medical and other related industries.Metal Components is...

  • Press Packer 3rd Shift

    5 days ago

    Grand Rapids, Michigan, United States Challenge Manufacturing Full time $40,000 - $70,000 per year

    Who We Are:Challenge Manufacturing's mission is to manufacture with operational excellence by empowering our employee-owners. As a leading tier 1 supplier of complex metal assemblies for the global automotive industry, we drive innovative solutions for future mobility. We believe the best ideas come from individual unique perspectives. These ideas combined...

  • Trims Operator

    1 day ago

    Grand Rapids, Michigan, United States Falk Panel Full time

    Steel Trims OperatorAbout the position:The Steel Trims Operator will be responsible for effectively carrying out operational duties associated with the shearing of steel into flat stock sheets, then packaging them to go to trim shops, this role will be working in a small team and will also occasionally operate the press brake.Key Responsibilities:Operate...

  • 2nd Shift

    1 day ago

    Grand Rapids, Michigan, United States Haerter Stamping LLC Full time

    H2Stamping USA LLC is a rapidly growing, international supplier of high-precision stamping, molding, tooling, and assemblies. We are looking to hire experienced 2nd Shift Stamping Press Operators with a minimum of 3 years' experience running automatic stamping presses.We offer an excellent paid time off package, paid holidays, paid breaks, a robust benefit...

  • Tool and Die Journeyman

    1 week ago

    Grand Rapids, Michigan, United States AIMS Advantage Full time $48,000 - $90,000 per year

    Tool and Die Journeyman Duties Performs all in-house die polishing and bench work Maintains a preventative maintenance program on all tools. Keeps a thorough and accurate history on each tool Performs mold cleaning, lubrication, and proper mold identification to the tooling standards Maintains parting line, quality and surface polish Maintains and tracks all...

  • SPS03 Machine 1st Shift

    3 days ago

    Grand Rapids, Michigan, United States Steelcase Full time $80,000 - $150,000 per year

    General InformationCountry:USAState:MichiganCity:Grand RapidsOffice Location:4100 68th Street Date posted:27-Nov-2025Business Function:Manufacturing/OperationsPosition Type:Full-Time/RegularDescriptionGeneral Description(Summary description of the primary duties and objectives of the position.)Sets up and operates highly technical machines requiring...