Residential Assembler
7 days ago
Set up miscellaneous light and automatic assembly and packing machines to perform a variety of operations, such as adjusting set-ups until parts and sub-assemblies meet prescribed specification; instruct operators in proper use of set-up; troubleshoot on machines; and, make necessary adjustments and set ups to keep machines in operation. Assembler will be expected to work in a flexible team environment. This is a full-time permanent Union-affiliated position for the 1st Shift. Weekends and overtime hours as needed based on demand.
JOB DUTIES:
- Operate assembly machines and equipment safely. Make up unit and multiple pack cartons, pack assemblies as prescribed, seal and label cartons.
- Will be required to perform work per print, process documentation, parts lists, maintenance manuals, engineering documentation or engineering instruction.
- Perform functional tests, such as visual, mechanical, and electrical checks on parts, sub-assemblies, and devices. Check quality of parts being run using a variety of gages and other measuring equipment and stop production due to defects. Make sure measurement instruments being used are properly calibrated.
- Use an appropriate system to obtain and move materials and supplies within the department to meet production schedules.
- Perform changeover duties and machine startup/shut down procedures. Load/unload parts.
- Perform operator maintenance awareness duties and checklists.
- Set-up and operate a variety of assembly equipment. Required to work within skill level, experience, and training to maximize equipment uptime. Implement flexible workstations.
- Rework parts and assist with product problem solving. Gather data for continuous improvement.
- Conduct downtime tracking (where applicable) and keep updated documentation on equipment problems, scrap, quality checks, etc.
- Work in a team environment which may include: Learning and using team skills, training other team members, identifying bottlenecks and work arounds. Will be required to attend communications meetings. May be asked to give customer/supplier tours and perform safety tours. Be responsible for actions log.
- Rotate among all jobs in department and move to bottlenecks.
- Perform and prioritize daily schedule, based on customer's requirements. Assist with scheduling and planning. Provide order status.
- Use basic computer skills to assist with communication between groups, cells, and shifts.
- May require successful completion of a variety of on the job certifications or qualification programs (including classroom instruction where applicable).
- MOS - Embrace and engage in the Manufacturing Operating System (MOS) including activities, but not limited to Safety & Behavioral Observation Process (BOP), 5S, Continuous Improvement (Kaizen), Tiered Accountability Process, Standard Work, Rapid Problem Solving (RPS), Built In Quality (BIQ), Coaching, Total productive Maintenance (TPM) and Knowledge Sharing
YOU MUST HAVE:
- +6 months of experience with assembly or machine operating in a manufacturing environment
TOOLS AND EQUIPMENT EXPERIENCE PREFERRED:
- Common hand tools and power drivers
- Personal computer
- Inspection equipment and gages
- Non-motorized material handling equipment
- Miscellaneous light machines
- Housekeeping equipment
- Semi-automated and automated machines
- Soldering equipment
WORKING CONDITIONS:
- Exposure to miscellaneous chemicals, including, but not limited to: Alcohols, Epoxy/Loctite, Mercury, Oil/vanishing oil, Urethane Foam Resin, Ethylene Glycol, Methylethylketone (MEK), Molycote, Glycol, Acetone, Lead Solder, Beryllium Copper, Hot Melt Glue, Polymeric Isocyanate, General cleaning chemicals, and various other solvents/chemicals.
- Works standing while performing duties online.
- Hand soldering may be required.
- Long pants, safety shoes, and safety glasses with side shields required. Personal Protective Equipment as required according to job duties.
- No drinking or eating in designated areas.
- Must maintain good housekeeping practices in assigned area. (Perform 5S activities within cell)
- Must work in a team environment and will be required to rotate to various aspects of the job.
- May be exposed to noise, dirt and/or chemicals (examples listed above) in some areas.
- Assemblers are flexed to multiple departments based on demand need.
WE VALUE:
- Mechanical repair experience (both machine and automotive) will also be considered
- Computer literacy
- Good oral and written communication skills
- Strong work ethic and initiative to learn processes
- A certain degree of creativity and latitude
- Solder certifications
WHAT'S IN IT FOR YOU:
- Immediate vacation and sick time
- Immediate benefits including 401k/retirement matching programs, health, vision, and dental insurances, and employee stock purchasing program.
#LI-YC2
#LI-ONSITE
-
Residential Plumbing Installer
2 days ago
Mill Valley, California, United States Handyman Heroes Full timeOverviewWe are seeking a skilled and reliable Residential Plumbing Installer to join our team. This role involves installing, repairing, and maintaining plumbing systems in residential settings, ensuring compliance with safety standards and building codes. The ideal candidate will have a strong background in construction and plumbing, with the ability to...
-
Warehouse Senior Manager
1 hour ago
Moreno Valley, California, United States Legrand North America Full time $157,000 - $161,000Position DescriptionAt a GlanceLegrand has an exciting opportunity for a Warehouse Senior Manager to join the Wattstopper Team in Moreno Valley, CA.The Senior Manager, Warehouse & Reverse Logistics is responsible for leading end-to-end warehouse operations and reverse logistics processes, including receiving, inventory management, shipping, returns...
-
Manufacturing Engineering/NPL Manager
4 days ago
Simi Valley, California, United States Regal Rexnord Corporation Full time $107,000 - $165,000 per yearSuccessful candidate will lead the manufacturing engineering team to resolve daily manufacturing challenges, manufacturing process improvements, and bring breakthrough changes to our machining, assembly and supplier support, by implementing lean concepts to reduce waste and variation. This position is located in Simi Valley, California.ResponsibilitiesReduce...
-
Manufacturing Engineer II
1 week ago
Simi Valley, California, United States Regal Rexnord Corporation Full time $75,000 - $110,000 per yearPosition OverviewThe Manufacturing Engineer II is responsible for helping to drive cost reduction activities through process improvements to directly impact the overall performance objectives for the company and compliance to AS9100 and NADCAP requirements and/or division. This position significantly impacts Regal Rexnord's ability in the areas of Safety,...
-
Manufacturing Engineering/NPL Manager
7 days ago
Simi Valley, California, United States Regal Rexnord Full time $107,000 - $165,000Successful candidate will lead the manufacturing engineering team to resolve daily manufacturing challenges, manufacturing process improvements, and bring breakthrough changes to our machining, assembly and supplier support, by implementing lean concepts to reduce waste and variation. This position is located in Simi Valley, California.Responsibilities...
-
Warehouse Senior Manager
2 weeks ago
Moreno Valley, CA, United States Legrand NA Full timePosition Description At a Glance Legrand has an exciting opportunity for a Warehouse Senior Manager to join the Wattstopper Team in Moreno Valley, CA. The Senior Manager, Warehouse & Reverse Logistics is responsible for leading end-to-end warehouse operations and reverse logistics processes, including receiving, inventory management, shipping, returns...
-
Warehouse Senior Manager
2 weeks ago
Moreno Valley, CA, United States Legrand NA Full timePosition Description At a Glance Legrand has an exciting opportunity for a Warehouse Senior Manager to join the Wattstopper Team in Moreno Valley, CA. The Senior Manager, Warehouse & Reverse Logistics is responsible for leading end-to-end warehouse operations and reverse logistics processes, including receiving, inventory management, shipping, returns...
-
Plumbing Cable Technician
4 days ago
Sun Valley, United States L.A. Hydro-Jet & Rooter Service Full timeAs a Cable Technician for L.A. Hydro Jet & Rooter Services for the Night Shift (1:00 PM Start Time) in the Sun Valley, CA area. You will be responsible for assembling, installing, and repairing pipes, fittings, and fixtures of water and drainage sewage systems.WHAT SETS L.A. HYDRO-JET APART:Competitive hourly wages and benefits package.Dispatched from home...
-
Pipe Fitter I
4 days ago
Spring Valley, United States PACER GROUP Full timeTitle: Pipe Fitter IWork Location: Spring Valley, CA 91978Shift: 5:30 am - 2 pm.Duration: 6 months Temp to hireInterviews are onsiteJob Summary:We are seeking a skilled and safety-conscious Pipe Fitter to join our team. The ideal candidate will be responsible for installing, repairing, and maintaining piping systems in accordance with project specifications...
-
Pipe Fitter I
4 days ago
Spring Valley, United States PACER GROUP Full timeJob Title: Pipe Fitter ILocation: Springs Valley, CA, 91978Duration: 6 Months (Contract to Permanent)Shift Timing: 5:30 am - 2 pmNote: Potential to convert to FT based on upcoming work Interviews are onsite Description:Job Summary: We are seeking a skilled and safety-conscious Pipe Fitter to join our team. The ideal candidate will be responsible for...
-
Pipe Fitter I
4 days ago
Spring Valley, United States PACER GROUP Full timeBelow mentioned is the full job description for your reference:Job Title: Pipe Fitter ILocation:Spring Valley, CA, 91978Duration: 6 Months (Contract to Permanent)Shift Timing: 5:30 am - 2 pmNote: Potential to convert to FT based on upcoming work Interviews are onsite Job Summary: We are seeking a skilled and safety-conscious Pipe Fitter to join our team. The...
-
Electrical Engineer II
2 days ago
Golden Valley, United States Resideo Full timeAre you interested in a career in product development and contributing to a variety of Original Equipment Manufacturer products? As an Electrical Engineer, you'll participate in all phases of product development lifecycle. You'll generate schematic designs and layouts, create specifications, assemble product prototypes and perform testing, create reports,...
-
Pipe Fitter I
2 weeks ago
Spring Valley, CA, United States Pacer Group Full timeBelow mentioned is the full job description for your reference: Job Title: Pipe Fitter I Location:Spring Valley, CA, 91978 Duration: 6 Months (Contract to Permanent) Shift Timing: 5:30 am - 2 pm Note: Potential to convert to FT based on upcoming work Interviews are onsite Job Summary: We are seeking a skilled and safety-conscious Pipe Fitter to join our...
-
PLUMBING SALES REP
2 weeks ago
Apple Valley, CA, United States Pro Integrity Plumbing Corp Full timeBenefits: 401(k) matching Bonus based on performance Company car Free food & snacks Free uniforms Opportunity for advancement Benefits/Perks No On Call nights Monday through Friday Schedule (Some Saturdays) Competitive Compensation Performance based Bonuses Make $6k to $15k + a month in commission. Company paid Cell Phone and Boots Job Summary We are looking...
-
PLUMBING SALES REP
1 week ago
Apple Valley, CA, United States Pro Integrity Plumbing Corp Full timeBenefits: 401(k) matching Bonus based on performance Company car Free food & snacks Free uniforms Opportunity for advancement Benefits/Perks No On Call nights Monday through Friday Schedule (Some Saturdays) Competitive Compensation Performance based Bonuses Make $6k to $15k + a month in commission. Company paid Cell Phone and Boots Job Summary We are looking...