ENGINEERING TECHNICIAN IV

6 days ago

Lexington Park, Maryland, United States Amelex Full time $140,000 - $196,000 per year

Responsibilities: Perform non-routine assignments of substantial variety and complexity, using operational precedents, which are not fully applicable. Such assignments, which are typically parts of broader assignments, are screened to eliminate unusual design problems. May also plan such assignments. Receive technical advice from a supervisor or engineer and the work is reviewed for technical adequacy (or conformity with instructions). This technician may oversee or be assisted by lower level technicians and have frequent contact with professionals and others within the establishment. Perform duties such as the following:

  • Develop or review designs by extracting and analyzing a variety of engineering data. Apply conventional engineering practices to develop, prepare, or recommend schematics, designs, specifications, electrical drawings, and parts lists. Examples of designs include detailed circuit diagrams; hardware fittings or test equipment involving a variety of mechanisms; conventional piping systems; and building site layouts.
  • Conduct tests or experiments requiring selection and adaptation or modification of a wide variety of critical test equipment and test procedures; set up and operate equipment; record data, measure and record problems of significant complexity that sometimes require resolution at a higher level; and analyzes data and prepares test reports.
  • Apply methods outlined by others to limited segments of research and development projects; construct experimental or prototype models to meet engineering requirements; conduct tests or experiments and redesigns as necessary; and record and evaluate data and reports findings.

Education: High School Diploma or equivalent.

Experience: A minimum of ten (10) years of experience performing the tasking listed above in support of DoD is required. Experience directly supporting C-UAS systems and subsystems is preferred.

Other: An Active Secret Security Clearance is required. CONUS and OCONUS travel is required for this position.

Wage Range Information: This full-time position's wage range is $35 - $41/hour depending on experience and qualifications.

Benefits Information:We offer a generous benefits package including a 401k with employer match. Full time employees are also eligible for family medical, dental and vision benefits; as well as ancillary benefits including life and accidental death and dismemberment insurance; short- and long-term disability; flexible spending accounts; long-term care insurance; and accident, hospital, and critical illness insurance. Full-time employees are also eligible for 2 weeks' vacation leave accrual per year (this accrual increase as tenure with company increases), 7 days sick leave, and 11 paid holidays, with additional leave time available for bereavement, jury duty, and military training days throughout the year.

  • ENGINEERING TECHNICIAN IV

    2 days ago

    Lexington Park, Maryland, United States Amelex Full time

    Responsibilities: Perform non-routine assignments of substantial variety and complexity, using operational precedents, which are not fully applicable. Such assignments, which are typically parts of broader assignments, are screened to eliminate unusual design problems. May also plan such assignments. Receive technical advice from a supervisor or engineer and...

  • CAD Technician IV

    16 hours ago

    Lexington Park, Maryland, United States Summit Federal Services, LLC Full time

    SFS is currently looking to find a Drafter/CAD Operator IV to support their client located in Lexington Park MD. This is for an active contract and immediate opening. Qualified applicants must have an active SECRET CLEARANCEDescription Responsibilities:This operator works closely with design originators, preparing drawings or computer models of unusual,...

  • Aerospace Engineering Technician

    12 hours ago

    Lexington Park, Maryland, United States Synectic Solutions Inc Full time

    SSI needs to add an Engineering Technician to support our current list of services provided to the U.S. Navy.  This is a contingent opportunity requiring a signed letter of intent for proposal use.  Responsibilities Performs general engineering support functions for wiring, sheet metal, and electronics, drafting or machining disciplines. Operate, install,...

  • ENGINEERING TECHNICIAN III

    4 days ago

    Lexington Park, Maryland, United States Amelex Full time $70,000 - $90,000 per year

    Responsibilities: Perform assignments that are not completely standardized or prescribed. This technician selects or adapts standard procedures or equipment, using fully applicable precedents. This technician receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed; performs recurring work independently; and has...

  • Aerospace Structures Technician

    1 week ago

    Lexington Park, Maryland, United States Synectic Solutions Inc Full time $60,000 - $120,000 per year

    SSI needs to add a Structural Technician to support our current list of services provided to the U.S. Navy. This is a contingent opportunity requiring a signed letter of intent for proposal use.ResponsibilitiesPerforms strain gauge installations in support of NAVAIR structural testing. The installation can be on an aircraft component, sub-system, or on the...

  • Aerospace Structures Technician

    2 days ago

    Lexington Park, Maryland, United States Synectic Solutions Inc Full time

    SSI needs to add a Structural Technician to support our current list of services provided to the U.S. Navy.  This is a contingent opportunity requiring a signed letter of intent for proposal use.  Responsibilities Performs strain gauge installations in support of NAVAIR structural testing. The installation can be on an aircraft component, sub-system, or...

  • Aerospace Instrumentation Technician

    1 week ago

    Lexington Park, Maryland, United States Synectic Solutions Inc Full time $60,000 - $120,000 per year

    SSI needs to add an Instrumentation Technician to support our current list of services provided to the U.S. Navy.  This is a contingent opportunity requiring a signed letter of intent for proposal use.  Responsibilities Performs fabrication, installation and operational support of instrumentation systems and wiring harnesses on various aircraft and test...

  • P-8A Test Engineering Technician

    1 week ago

    Lexington Park, Maryland, United States Tekla Research, Inc. Full time $100,000 - $145,000 per year

    Must be a U.S. Citizen Clearance Required: Position requires a SECRET Security Clearance with ability to gain a TS clearance and SCI eligibilityEducation: High school graduation or equivalency certification.Desired Education: Completion of a technical school, trade school, or advanced armed services technical school curriculum or course of training in...

  • Aerospace Sheet Metal Technician

    2 days ago

    Lexington Park, Maryland, United States Synectic Solutions Inc Full time

    SSI needs to add a Sheet Metal Technician to support our current list of services provided to the U.S. Navy.  This is a contingent opportunity requiring a signed letter of intent for proposal use.  Responsibilities Performs repair, fabrication, modification, and installation of sheet metal parts, items, and assemblies. Sheet metal mechanic work requires...

  • Automotive Technician

    4 days ago

    College Park, Maryland, United States Midas COLLEGE PARK 3619 Full time $40,000 - $80,000 per year

    At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience.  We are looking for automotive technicians/mechanics that are able to work independently of others, while also being able...