Assembler

3 days ago

Rochester, NY, United States Magnetic Technologies Ltd Full time
Job purpose

Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs.

Duties and responsibilities
  • Maintains proper quality and quantities of manufactured materials.
  • Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners.
  • Perform SPC on all related jobs as required.
  • Operate degreasing systems as required.
  • Able to set-up equipment where applicable.
  • Able to calibrate and zero equipment.
  • Perform preventative maintenance.
  • Use general measuring instruments, such as indicator, calipers, and height gages.
  • Rotate from one job to another if needed.
  • Maintain accurate documentation.
  • Follows all established company policies
  • Follows all established safety procedures and precautions. Including filing incident/accident reports.
  • Notifies Supervisor of all unsafe/hazardous conditions or defective equipment.
  • Other duties as assigned
Qualifications
  • High School Diploma/GED
  • Be able to follow written and oral instructions.
  • Previous employed in a production environment helpful.
  • Able to communicate.
  • Math aptitude.
  • Mechanical capabilities helpful.
Working conditions
  • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used.
  • Plant wide climate control and air conditioning
  • Could work in areas with excessive noise. NOTE: Ear protection available.
  • Certain jobs extremely dirty. NOTE: Smocks or work outfits provided.
Physical requirements
  • Could require intermittent and long periods of sitting and/or standing.
  • Required to do repetitive work.
  • Periodic lifting of materials not to exceed 50 pounds.

Hours:

A Shift:

Mon-Thurs: 5:30am-3:00pm

Fri: 5:30am-9:30am

#ROC

Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

A Shift:

Mon-Thurs: 5:30am-3:00pm

Fri: 5:30am-9:30am

  • Combination Assembler

    4 days ago

    Rochester, NY, United States GMM Pfaudler Full time

    Description of Job: Level 1 - RC 15 - Includes White Film Evaporators (WFE), Chronical Dryer Blenders (CDD) and all lower levels. Level 2 - RC 14 - All A-Level Vessel Assemblies, Clamp Top Heads and Drive Assembly, Movac Equipment. Level 3 - RC 12-13 - B-level Vessel Assembly. Level 4 - RC 10 -11 - Small Parts Assembly, Valves, Bearings, Seals, All Internal...

  • Combination Assembler

    3 days ago

    Rochester, NY, United States GMM Pfaudler Full time

    Job Description: Level 1 - RC 15 - Includes White Film Evaporators (WFE), Chronical Dryer Blenders (CDD) and all lower levels. Level 2 - RC 14 - All A-Level Vessel Assemblies, Clamp Top Heads and Drive Assembly, Movac Equipment. Level 3 - RC 12-13 - B-level Vessel Assembly. Level 4 - RC 10 -11 - Small Parts Assembly, Valves, Bearings, Seals, All Internal...

  • Combination Assembler

    22 hours ago

    Rochester, NY, United States Pfaudler Inc Full time

    Job Description: Level 1 – RC 15 – Includes White Film Evaporators (WFE), Chronical Dryer Blenders (CDD) and all lower levels. Level 2 – RC 14 – All A-Level Vessel Assemblies, Clamp Top Heads and Drive Assembly, Movac Equipment. Level 3 – RC 12-13 – B-level Vessel Assembly. Level 4 – RC 10 -11 – Small Parts Assembly, Valves, Bearings, Seals,...

  • Combination Assembler

    6 days ago

    Rochester, NY, United States Pfaudler Inc Full time

    Description of Job: Level 1 – RC 15 – Includes White Film Evaporators (WFE), Chronical Dryer Blenders (CDD) and all lower levels. Level 2 – RC 14 – All A-Level Vessel Assemblies, Clamp Top Heads and Drive Assembly, Movac Equipment. Level 3 – RC 12-13 – B-level Vessel Assembly. Level 4 – RC 10 -11 – Small Parts Assembly, Valves, Bearings,...

  • Combination Assembler

    2 weeks ago

    Rochester, NY, United States Pfaudler Inc Full time

    Description of Job: Level 1 – RC 15 – Includes White Film Evaporators (WFE), Chronical Dryer Blenders (CDD) and all lower levels. Level 2 – RC 14 – All A-Level Vessel Assemblies, Clamp Top Heads and Drive Assembly, Movac Equipment. Level 3 – RC 12-13 – B-level Vessel Assembly. Level 4 – RC 10 -11 – Small Parts Assembly, Valves, Bearings,...

  • Combination Assembler

    1 week ago

    Rochester, NY, United States Pfaudler Inc Full time

    Description of Job: Level 1 – RC 15 – Includes White Film Evaporators (WFE), Chronical Dryer Blenders (CDD) and all lower levels. Level 2 – RC 14 – All A-Level Vessel Assemblies, Clamp Top Heads and Drive Assembly, Movac Equipment. Level 3 – RC 12-13 – B-level Vessel Assembly. Level 4 – RC 10 -11 – Small Parts Assembly, Valves, Bearings,...

  • Electromechanical Assembler

    2 weeks ago

    Rochester, NY, United States L3Harris - North American Facilities Full time

    Overview Join our dynamic team in Rochester, NY, as an Electromechanical Assembler! In this role, you will play a crucial part in the assembly and testing of electromechanical systems, contributing to innovative projects that make a difference. We’re looking for someone who is detail-oriented, enjoys hands-on work, and thrives in a collaborative...

  • Electromechanical Assembler

    1 week ago

    Rochester, NY, United States L3Harris - North American Facilities Full time

    Overview Join our dynamic team in Rochester, NY, as an Electromechanical Assembler! In this role, you will play a crucial part in the assembly and testing of electromechanical systems, contributing to innovative projects that make a difference. We’re looking for someone who is detail-oriented, enjoys hands-on work, and thrives in a collaborative...

  • Assembler

    5 days ago

    Rochester, NY, United States Aerotek Full time

    Job Title: Mechanical Assembler Pay: $23/hr 1st Shift - 7am-3:30pm - with flexible hours Job Description The Technical Assembler II is responsible for performing a variety of complex builds for a diverse customer base. This role involves working from production blueprints, digital work instructions, parts lists, and verbal instructions to execute various...

  • Assembler

    3 days ago

    Rochester, NY, United States Aerotek Full time

    Job Title: Mechanical Assembler Pay: $23/hr 1st Shift - 7am-3:30pm - with flexible hours Job Description The Technical Assembler II is responsible for performing a variety of complex builds for a diverse customer base. This role involves working from production blueprints, digital work instructions, parts lists, and verbal instructions to execute various...