Dimensional/Quality Inspector Level 1

3 weeks ago

South Gate, United States Precision Castparts Full time $18 - $35
With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability – not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Job Description

Position Summary:

Level One: Inspects forged bars, rings and/or rough machined parts, to ensure conformance to specifications by assisting the Chief Inspector and performing the following duties under little supervision and training.

Primary Duties & Responsibilities:

  • Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions.
  • Compares surface finish of workpiece to finish on set of standard blocks making fingertip touch comparison to ensure production of specified surface finish.
  • Measures dimensions such as length, height, and distance, between reference points to ensure product meets
  • Locates reference point on part and measures dimensions such as angle, arc, and
  • Reports findings to Inspection Supervisor and, if necessary, write Inspection Deviation Report (IDR) if parts are not in conformance.
  • Sets up and tries out inspection equipment to ensure
  • Substitutes known values such as dimensions from blueprints into standard formulas and solves for unknown quantities to determine dimensions not specified in blueprints.
  • Sets up portable CMM and related
  • Uses forklifts and cranes to move heavy

Required Skills:

  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
  • Ability to write routine reports and correspondence.
  • Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
  • Ability to apply concepts of introductory algebra and geometry
  • Ability to solve practical problems and deal with various concrete variables in situations where only limited standardization exists.
  • Ability to interpret multiple instructions furnished in written, oral, diagram, or schedule form.

Experience & Education

  • High School diploma or general education degree (GED); or five years related experience and training; or equivalent combination of education and experience.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate.

This is a 2nd shift opportunity.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

For informational purposes only, the range of pay for this role is $18.00 to $35.00 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company’s Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company’s bonus multiple, based on the Company’s performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company’s 401(k) plan.

This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.

  • Dimensional Inspector

    3 days ago

    South Gate, California, United States Volt Full time

    At Volt, we are committed to delivering high-quality products that meet our customers' expectations. As a Dimensional Inspector, you will play a critical role in ensuring the accuracy and precision of our production process.">Job Summary:We are seeking a highly skilled and detail-oriented individual to join our team as a Dimensional Inspector. In this role,...

  • Dimensional Inspector Specialist

    5 days ago

    South Gate, California, United States Volt Full time

    Company OverviewVolt is a leading manufacturer of high-quality products, and we are seeking an experienced Dimensional Inspector to join our team.Job SummaryWe are looking for a skilled and detail-oriented individual to work in our quality control department. As a Dimensional Inspector, you will be responsible for ensuring that our products meet the highest...

  • SZ 2nd shift-Dimensional Inspector

    3 days ago

    South Gate, United States Volt Full time

    Start your career with VOLT Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will:Reads blueprints or engineering specifications....

  • SZ 1st shift-Dimensional Inspector

    1 week ago

    South Gate, United States Volt Full time

    Come create your career with Volt Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will:Reads blueprints or engineering specifica...

  • SZ 1st shift-Dimensional Inspector

    2 weeks ago

    South Gate, United States Volt Full time

    Come create your career with Volt Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will: Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions. Compares surface finish of workpiece to finish on set of standard blocks...

  • SZ 1st shift-Dimensional Inspector

    2 weeks ago

    South Gate, United States Disability Solutions Full time

    Come create your career with Volt Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will: Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions. Compares surface finish of workpiece to finish on set of standard blocks...

  • SZ 2nd shift-Dimensional Inspector

    1 week ago

    South Gate, United States Disability Solutions Full time

    Start your career with VOLT Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will: Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions. Compares surface finish of workpiece to finish on set of standard blocks making...

  • SZ 1st shift-Dimensional Inspector

    1 week ago

    South Gate, United States Volt Full time

    Come create your career with VoltEnsure you read the information regarding this opportunity thoroughly before making an application. Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will:Reads blueprints or engineering specifications to obtain product information such as specified material, surface...

  • SZ 1st shift-Dimensional Inspector

    3 weeks ago

    South Gate, United States Volt Workforce Solution Full time

    Job DescriptionJob DescriptionCome create your career with Volt Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will:Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions.Compares surface finish of workpiece to finish on...

  • SZ 2nd shift-Dimensional Inspector

    1 week ago

    South Gate, United States Volt Workforce Solution Full time

    Job DescriptionJob DescriptionStart your career with VOLT Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will:Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions.Compares surface finish of workpiece to finish on set...

  • SZ 1st shift-Dimensional Inspector

    2 weeks ago

    South Gate, United States Disability Solutions Full time

    Come create your career with Volt Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will:Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions.Compares surface finish of workpiece to finish on set of standard blocks making...

  • SZ 1st shift-Dimensional Inspector

    5 days ago

    South Gate, United States Volt Full time

    Come create your career with Volt Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will:Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions.Compares surface finish of workpiece to finish on set of standard blocks making...

  • Dimensional Inspector

    3 weeks ago

    South Bend, Indiana, United States Epic Aircraft Full time

    About Epic Aircraft">We are committed to innovation, safety, and excellence in the aviation industry.As a leader in manufacturing high-performance, all-carbon fiber, single-engine turboprop aircraft, we seek talented individuals who share our passion for aerospace.A Mid-Level Opportunity">The Dimensional Inspector position offers a competitive wage DOE and...

  • Quality Assurance Inspector

    2 days ago

    South Gate, California, United States Ronin Group Full time

    Job Description:Ronin Group is seeking a skilled Dimensional Inspector to join our team. The ideal candidate will have experience with PC-DMIS, RomerArm, Calypso, or Polyworks and be able to read blueprints or engineering specifications to obtain product information.The successful candidate will compare surface finish of workpieces to standard blocks,...

  • Dimensional inspector

    3 hours ago

    South Gate, United States Ronin Group Full time

    3 must haves:High School diploma or general education degree (GED); or five years related experience and training; or equivalent combination of education and experience.Must have previous experience with PC-DMIS, RomerArm, Calypso or PolyworksMust be able to pass a background check and drug screenPosition Summary:Level One: Inspects forged bars, rings and/or...

  • Dimensional Measurement Technician

    3 days ago

    South Gate, California, United States Ronin Group Full time

    Job Summary:We are looking for a skilled Dimensional Measurement Technician to join our team at Ronin Group. This role is responsible for conducting detailed inspections of products to ensure they meet specifications.Main Responsibilities:Inspect forged bars, rings, and rough machined parts to ensure they meet specifications.Measure dimensions, angles, and...

  • SZ 1st shift-Dimensional Inspector

    1 week ago

    South Gate, CA, United States Volt Full time

    Come create your career with Volt Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will: Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions. Compares surface finish of workpiece to finish on set of standard blocks...

  • SZ 2nd shift-Dimensional Inspector

    1 week ago

    South Gate, CA, United States Volt Full time

    Start your career with VOLT Volt is immediately hiring for Dimensional Inspector in South Gate, CA. As a Dimensional Inspector you will: Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions. Compares surface finish of workpiece to finish on set of standard blocks making...

  • Production Inspector

    3 days ago

    South Gate, California, United States Volt Full time

    As a Dimensional Inspector at Volt, you will have the opportunity to work with a talented team of professionals who share your passion for quality and precision.Key Responsibilities:Read and interpret blueprints and engineering specifications to obtain product informationCompare surface finish of workpieces to standard blocks to ensure production of...

  • Dimensional Inspection Expert

    3 weeks ago

    South Bend, Indiana, United States Trigo ADR Americas Full time

    About the Job:\This Aerospace Inspector role is a unique opportunity to join a leading provider of global Supplier Delivery Assurance, Supplier Development, and Quality Management Services. We are looking for an experienced and skilled individual to conduct inspections on-site at suppliers' locations, ensuring that products meet the required specifications...