Lathe Operator

1 week ago

Canton, United States Surge Staffing Full time
Job DescriptionJob Description

The Rate of pay starts at $23.56 with a top rate of $25.32 until February where it jumps up to $26.08

Monday through Friday 10 hour shifts from 9pm- 7am and  Saturday1am-6pm

 

Responsible for turning necks, facing, centering, etc -finishing lathe-smaller finer cuts-customer centers, etc.

· An overhead crane is used on these machines to set rolls and take out chip boxes.

· The employee can hook up the chain for the chip box, by squatting to the level of the chain and not having to lift it to place it on the crane hook.

· Finishing Lathe- the employee needs to make an average of 4 tools changes per shift on this machine. Based on the design of the machine, the tool change is made between knee and waist level, and some have easier leverage than others.

· They weigh between 10-40#s and are handled on an infrequent basis per hour.

· Once set-up is completed, the employee runs the machine using automatic controls between waist and chest level with minimal coordination of bilateral hands.

· When the machine is running, the employee is only required to supervise the operation and dislodge chips on an occasional to frequent basis per hour.

· Chips are pushed by climbing on 2 steps and using a chip pusher to dislodge the chips while using a partial squatting motion in the standing position.

· Chips can also be pushed from a vertical position at ground level and this mostly involves using bilateral arms.

· Some lathes do not have hydraulics to move the rolls on the machine.

· The rolls have to be locked or unlocked from their location by using a variety of cranks, wrenches, etc.

· This involves increased use of bilateral upper extremities with twisting of the trunk. Need to be able to push and pull with at least 50#s of force to use the tools.

· To apply drivers to roll may be required to lift up to 90# waist level to neck of roll several times each month.

· Rough Lathe-needs to be able to lift a 50# tool without a jib crane and place it at 28 inches off the floor from the left side and make sure it fits in the slot for the tool.

· There is only a space of 2 feet on the side of the insert, so that the employee would not be able to stand in front of it and perform this task.

· Also need to be able to handle a chip pusher that is 10 feet and 8 inches long and weighs 15# on an occasional to frequent basis per hour.

· Need to be able to push chips that are approximately 12 feet away.

· Dual Compound -the cutters on this machine need to be mounted twice the number of times as a regular lathe as they cut from both ends.

· The parts are mounted sideways from the right and the left.

· On one side the part is mounted 25 inches off the floor from approximately 2 feet away and from 6 inches away on the other side.

· Do not need to use a chip pusher on this machine as they move into the underground bin by themselves, but the employee needs to be able to use a broom to knock them down with minimal force on an infrequent to occasional basis per hour.

Company Descriptiona fabricator and a maker of custom displays.Company Descriptiona fabricator and a maker of custom displays.

  • Lathe Machinist

    3 days ago

    Canton, United States Your Hiring Coaches Full time

    Manual Lathe Machinist to operate Vertical Turning Lathe | Vertical Turret Lathe | Vertical Boring Mill Part diameters ranging from 30" - 124" Roughing and Finishing operations are performed. Finishing to tight tolerances. Machine, inspect parts ( micrometers, caliphers etc) and change tools. Read and follow work order instructions Machine setup without...

  • Lathe Machinist

    1 day ago

    Canton, United States International Staff Consulting Full time

    Manual Lathe Machinist to operate Vertical Turning Lathe | Vertical Turret Lathe | Vertical Boring MillPart diameters ranging from 30" - 124"Roughing and Finishing operations are performed. Finishing to tight tolerances.Machine, inspect parts ( micrometers, caliphers etc) and change tools. Read and follow work order instructionsMachine setup without...

  • Lathe Machinist

    1 week ago

    Canton, Ohio, United States Surge Staffing Full time

    Job SummaryWe are seeking a skilled Lathe Operator to join our team at Surge Staffing. The ideal candidate will have experience operating lathe machines and be able to work independently with minimal supervision.Key Responsibilities:Operate lathe machines to produce high-quality partsSet up and adjust machine tools as neededMonitor machine performance and...

  • Manual Machine Operator

    2 weeks ago

    Canton, United States Aerotek Full time

    Job DescriptionJob DescriptionJob Title: Manual Machine OperatorJob DescriptionManual Machine Operator (Lathe and Mills) | $20-$23 | 1st Shift | Canton, OH- Operate Manual Machines (Lathes and Mills)- Machining with Copper, Brass, Stainless Steel, Mild Steel, and Aluminum- Read Blueprints- Utilize calipers and micrometers for tolerancing- Set up machines for...

  • Press Brake Operator

    1 month ago

    Canton, United States Snelling Full time

    Snelling Staffing of Canton, OH is hiring a Press Brake Operator for a company in Canton, OH! Weekly Pay! Job Overview We are seeking a skilled Press Brake Operator to join our team. The ideal candidate will have experience working with various machinery and tools in a manufacturing setting. Responsibilities - Set up and operate a press brake machine to...

  • Machinist Machine Operator

    1 month ago

    Canton, United States International Machine Tool & Full time

    Job DescriptionJob DescriptionTo perform machining center operations as assigned by supervisor.Responsibilities:Setup machineSetup and change toolingInspection of own workmanshipPerform preventative maintenance on machineClean machine and surrounding areaNotify immediate supervisor of machine problemsFilling out time cards correctlySkills:Must be able to...

  • Experienced Manual Machinist for Classic Car Parts

    2 months ago

    Canton, Ohio, United States Lonestar Caliper Co. Full time

    Job OverviewPosition: Manual MachinistCompany: Lonestar Caliper Co.Job ResponsibilitiesWe are seeking a skilled Machinist to manufacture and refurbish classic automotive components. This role can be full-time or part-time, depending on the candidate's availability.The Machinist will be tasked with restoring vintage parts to their original specifications from...

  • Transformer Winding Department Lead Technician

    1 week ago

    Canton, Ohio, United States Integrity Technical Services, Inc. Full time

    Electrical Winding and Testing SpecialistIntegrity Technical Services, Inc. is seeking a skilled Electrical Winding and Testing Specialist to join our team in Canton, Ohio. As a key member of our Transformer Winding Department, you will be responsible for testing, rewinding, and refurbishing AC/DC motors. Key Responsibilities:High School / GED, Technical /...

  • CNC Machinist

    2 weeks ago

    Canton, Ohio, United States Staff Management SMX Full time

    CNC Machinist Job DescriptionWe are seeking a skilled CNC Machinist to join our team at Staff Management SMX. As a CNC Machinist, you will be responsible for operating computer numerical control (CNC) machines to produce high-quality parts.Key Responsibilities:Operate CNC machines to produce parts with precision and accuracyRead and interpret blueprints,...

  • CNC Machinist

    1 month ago

    Canton, United States Staff Management | SMX Full time

    Job DescriptionJob DescriptionCNC Machinists produce parts by operating a computer numerical control (CNC) machine. In this role, CNC Machinists adhere to quality and safety standards, complete accurate quality records as per SIS ISO standard requirements, and maintain the minimal daily maintenance requirements of equipment and supplies. These positions will...

  • Transformer Winding Department Lead

    4 weeks ago

    Canton, Ohio, United States Integrity Technical Services, Inc. Full time

    Job Title: Transformer Winding Department LeadWe are seeking a highly skilled and experienced Transformer Winding Department Lead to join our team at Integrity Technical Services, Inc.Job Summary:The Transformer Winding Department Lead will be responsible for overseeing the daily operations of the transformer winding department, ensuring that all tasks are...

  • Electrical Winding Department Lead

    1 week ago

    Canton, Ohio, United States Integrity Technical Services, Inc. Full time

    Job Title: Electrical Winding Department LeadJob Summary:Integrity Technical Services, Inc. is seeking an experienced Electrical Winding Department Lead to join our team. The successful candidate will be responsible for overseeing the winding department, ensuring high-quality products, and maintaining a safe working environment.Responsibilities:Oversee the...

  • CNC Machinist

    1 week ago

    Canton, Georgia, United States Staff Management | SMX Full time

    CNC Machinist Job DescriptionCNC Machinists at Staff Management | SMX produce high-quality parts by operating computer numerical control (CNC) machines. This role requires adherence to quality and safety standards, accurate quality record-keeping, and minimal equipment maintenance.Key Responsibilities:Operate CNC machines to produce partsAdhere to quality...

  • Transformer Winder

    1 week ago

    Canton, Ohio, United States gpac Full time

    Job Title: Transformer WinderJob Summary:We are seeking a skilled Transformer Winder to join our team at GPAC. As a key member of our team, you will be responsible for coil winding transformers in a workshop environment.Key Responsibilities:Wind various types of liquid and dry transformersOperate wire-coiling machines for winding wire or sheet coilsReview...

  • Transformer Winder

    3 weeks ago

    Canton, Ohio, United States gpac Full time

    Job Title: Transformer WinderGPAC is seeking a skilled Transformer Winder to join our team. As a key member of our electrical assembly team, you will be responsible for coil winding transformers in a workshop environment.Key Responsibilities:Wind various types of liquid and dry transformersOperate wire coiling machines for winding wire or sheet coilsReview...

  • Transformer Coil Winder

    4 weeks ago

    Canton, Ohio, United States gpac Full time

    Job Title: Transformer Coil WinderAt GPAC, we are seeking a skilled Transformer Coil Winder to join our team. As a key member of our production team, you will be responsible for winding transformers in a workshop environment.Key Responsibilities:Wind various types of liquid and dry transformersOperate wire-coiling machines for winding wire or sheet...

  • Manual Machinist

    4 weeks ago

    North Canton, United States Employ-Temps Staffing Service Full time

    Manual MachinistWe currently have a full-time Direct Hire opportunity for an experienced Manual Machinist with a customer in North Canton, OH who designs and manufactures world-class induction heating and melting equipment for steel manufacturers worldwide.In this position, you will be working in a modern full-service sheet metal fabrication and machine shop...

  • Senior Manufacturing Engineering Specialist

    2 days ago

    Canton, United States Cook Group Full time

    Overview: The Senior Manufacturing Engineer plans, directs, and coordinates manufacturing processes for medical device products, and supports Operations in a way to assure a quality product is produced in a timely manner. The Production Engineer works with Operations, Quality Assurance and Regulatory Affairs to improve existing product designs and processes...

  • Senior Manufacturing Engineering Specialist

    5 months ago

    Canton, United States Cook Group Full time

    Overview: The Senior Manufacturing Engineer plans, directs, and coordinates manufacturing processes for medical device products, and supports Operations in a way to assure a quality product is produced in a timely manner. The Production Engineer works with Operations, Quality Assurance and Regulatory Affairs to improve existing product designs and processes...

  • Manual Machinist

    1 month ago

    North Canton, United States Employ-Temps Staffing Service Full time

    Manual Machinist We currently have a full-time Direct Hire opportunity for an experienced Manual Machinist with a customer in North Canton, OH who designs and manufactures world-class induction heating and melting equipment for steel manufacturers worldwide. In this position, you will be working in a modern full-service sheet metal fabrication and machine...