Laser Electrical Optical Technician
4 weeks ago
Under general supervision, perform set-up, alignment, build, inspection, operation and test of electro-optical, electro-mechanical, laser and optical assemblies, from small sub-assemblies to completed integrated systems, while adhering to applicable Quality Systems Procedures. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The essential duties listed below are performed on a daily basis, therefore consistent and regular attendance is required. The requirements listed below are representative of the knowledge, skills, abilities and physical demands required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Essential Duties:
· Setup, build and alignment of electro-optical, electro-mechanical, laser and optical components and subassemblies· Cleans and installs high power laser optical components· Performs optical alignment; optimizes and fixes alignment of optics components· Troubleshooting, rework and integration of lasers, electronics and optical components· Varied work including electronics test and calibration, cable/harness installation and test, electro-optical and electro-mechanical assembly and test· Read, interpret and redline (as needed) blue prints, engineering change orders, schematics, assembly aids, non-conformance reports and repair instructions· Complies with all safety regulations to ensure a safe and clean work environmentComplies with Trimedyne Quality Management System including the quality policy, quality systems procedures, work instructions and proper documentation procedures
Other Responsibilities:
· Assembles, aligns, and tests assemblies and final product to support schedules · Responsible for completing the necessary paperwork related to material movementPerform other responsibilities as assigned
Knowledge, Experience and Skill/Ability Requirements:
| 1. Minimum Education Required:
| | · High School Diploma or general education degree (GED) · Electrical or Optical Technician degree preferred
| | | 2. Minimum Experience Required:
| | · Two to five years laser electro-optical assembly and test experience, including laser alignment, gluing, cleaning, soldering, test, and FQC, preferably in medical device manufacturing, or · equivalent combination of education and experience
| | | 3. Skills and Abilities Required:
| | · Good hand-eye coordination in the use of a variety of hand tools and precision measuring equipment, including microscopes and optical alignment fixtures · Close, distance, color & peripheral vision; depth perception and ability to adjust focus · Ability to read and comprehend drawings, schematics, diagrams and work instructions · Ability to understand and carry out instructions in written, oral or diagram form · Good organization skills and attention to detail · Good verbal and written communication skills required to follow written and verbal instructions; proficiency in the documentation of procedures, data and records · Ability to verify correct wiring and basic functionality of various sub-assemblies · Knowledge of standard optical test equipment · Basic computer skills, including common office applications
| Typical Working Conditions: (Describe environment including exposure to heat, cold, fumes, chemicals, allergens, mold, etc.) | Employees are regularly exposed to risk of electrical shock and occasionally exposed to the risk of laser radiation. Employees occasionally work near moving mechanical parts and are occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
| Equipment Used: (List all manual and automated equipment used in the course of performing essential functions.) | Works with manual and pneumatic tools, test equipment and inspection gauges, laser equipment, splicing equipment, spotcure light source, DI flushing station, laminar flow bench, microscopes, lens paper and cleaner
| Essential Physical Tasks: (List all physical tasks encountered in performing essential functions. | Stand, walk, sit, stoop, kneel, crouch, crawl; use hands to finger, handle or feel objects, tools, controls; reach with hands and arms; talk and hear; lift and/or move up to 50 pounds
-
Electro-Optical Systems Technician
1 month ago
Corona, California, United States TRIMEDYNE INC Full timeJob SummaryUnder general supervision, perform setup, alignment, build, inspection, operation, and test of electro-optical, electro-mechanical, laser, and optical assemblies, from small sub-assemblies to completed integrated systems, while adhering to applicable Quality Systems Procedures.Key ResponsibilitiesSetup, build, and alignment of electro-optical,...
-
Electrical Systems Technician
4 weeks ago
Corona, California, United States AmerisourceBergen Drug Corporation Full timeJob OverviewAmerisourceBergen Drug Corporation is seeking a skilled Electrical Systems Technician to join our team. In this role, you will be responsible for supporting the effective use and functionality of automated equipment within our Distribution Center.As an Electrical Systems Technician, you will diagnose and repair electrical and mechanical issues,...
-
Preventative Maintenance Technician
2 months ago
Corona, United States Circle K Full timeCircle K - 255 E Rincon St [Field Technician / Maintenance Mechanic] As a Maintenance Technician at Circle K, you'll: Maintain equipment by troubleshooting, repairing, cleaning and maintaining store and gas equipment; Facilitate repairs by contacting service vendors for materials; Maintain safe and clean work environment; Maintain facilities by performing...
-
Industrial Technician
3 weeks ago
Corona, United States Konecranes Nuclear Equip and Services LLC Full timeJob DescriptionJob DescriptionCountry: United StatesLocation: Corona, CA, United StatesEmployment type: Undefined termAt Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth....
-
Industrial Technician
1 week ago
Corona, United States Konecranes Nuclear Equip and Services LLC Full timeJob DescriptionJob DescriptionCountry: United StatesLocation: Corona, CA, United StatesLocation details: Employment type: Undefined termFull-time/part-time position: Full timeWorkplace Type: Field ServiceAt Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive....
-
Service Technician
4 weeks ago
Corona, California, United States Porta Kleen Full timeJob Summary:We are seeking a highly skilled Service Technician to join our team at Porta Kleen. As a Service Technician, you will be responsible for the maintenance, installation, and cleaning of portable sanitation equipment such as sleep trailers, shower trailers, restroom trailers, and shower trailers at the shop or in the field.Key...
-
Service Technician
4 weeks ago
Corona, California, United States MPW Industrial Services Full timeJob Summary:We are seeking a highly skilled Service Technician to join our team at MPW Industrial Services. As a Service Technician, you will be responsible for the maintenance, installation, and cleaning of portable sanitation equipment such as sleep trailers, shower trailers, restroom trailers, and shower trailers at the shop or in the field.Key...
-
HVAC Technician
1 month ago
Corona, California, United States LDI Mechanical Inc Full timeJob SummaryLDI Mechanical, Inc. is seeking a skilled HVAC Technician to join our start-up team. The ideal candidate will have experience in the multi-family HVAC industry and be able to work independently. Responsibilities include performing start-up processes on newly installed equipment, inspecting and maintaining HVAC systems, and troubleshooting...
-
Service Technician
1 month ago
Corona, United States MPW Industrial Services Full timeService Technician JOB FUNCTION: As a Service technician, you are responsible for the maintenance, installation and cleaning of portable sanitation equipment such as sleep trailers, shower trailers, restroom trailers, and shower trailers at the shop or in the field. ESSENTIAL FUNCTIONS: Service Technicians conduct routine maintenance and...
-
Electrician (2nd Shift)
3 weeks ago
Corona, United States 3M Full time3M - [Maintenance Technician / Electrical Technician] As an Electrician at 3M, you'll: Install and maintain electrical systems in a manufacturing setting; Troubleshoot and repair electrical issues on machinery and equipment; Perform routine inspections to ensure compliance with safety regulations; Collaborate with other maintenance team members to complete...
-
Electrician (2nd Shift)
3 weeks ago
Corona, United States 3M Full time3M - [Maintenance Technician / Electrical Technician] As an Electrician at 3M, you'll: Install and maintain electrical systems in a manufacturing setting; Troubleshoot and repair electrical issues on machinery and equipment; Perform routine inspections to ensure compliance with safety regulations; Collaborate with other maintenance team members to complete...
-
Generator Field Service Technician
2 months ago
Corona, United States Generac Full timeWe are Energy Systems, the leader in industrial power solution sales, service, and rentals.With an ongoing tradition of providing excellent products and outstanding service for our customers, Energy Systems is one of the longest existing Generac Industrial Distributors in the United States. We are a full-service distributor of Generac equipment and solutions...
-
Service Technician
1 month ago
Corona, United States Porta Kleen Full timeJOB FUNCTION: As a Service technician, you are responsible for the maintenance, installation and cleaning of portable sanitation equipment such as sleep trailers, shower trailers, restroom trailers, and shower trailers at the shop or in the field. ESSENTIAL FUNCTIONS: Service Technicians conduct routine maintenance and repairs on sleep trailers, restroom...
-
Refractive Technician/Counselor
4 weeks ago
Corona, United States Schneider Lasik Inc Full timeJob DescriptionJob DescriptionOur practice is looking for a happy and outgoing individual with a bubbly personality to add to our growing LASIK center!Are you looking for a job that is high-tech, high–touch and all about making the customer experience the top priority? If so, you may be just the right person to join our team!We specialize in laser vision...
-
Maintenance Technician
1 month ago
Corona, New York, United States LEFRAK ORGANIZATION Full timeJob DescriptionWe are seeking a skilled maintenance professional to join our team at the LeFrak Organization. As a maintenance technician, you will play a critical role in ensuring the physical integrity of our properties and providing a safe, secure, and comfortable living environment for our residents, visitors, and staff.Key Responsibilities:Perform...
-
Facilities Maintenance Technician II
4 weeks ago
Corona, United States Shamrock Foods Company Full timePay: $30-$36/HR D.O.E. Workdays: Tuesday-SaturdaySchedule: 6:00 AM-2:30PMThe Facilities Maintenance Technician II is responsible for installing, maintaining, and repairing machinery, equipment, physical structures, and pipe and electrical systems in commercial or industrial facilities. (S)he will also support training of level I technicians. Essential...
-
Commercial HVAC Service Technician
1 month ago
Corona, California, United States Inland Mechanical Services Inc Full timeJob SummaryAs a Commercial HVAC Service Technician at Inland Mechanical Services Inc., you will utilize your expertise in problem-solving and troubleshooting to communicate with clients and provide solutions for repairing their HVAC systems. Your responsibility will be to source all necessary materials or equipment to successfully complete the job and exceed...
-
Facilities Maintenance Technician II
2 weeks ago
Corona, United States Shamrock Foods Company Full timePay: $30-$36/HR D.O.E. Workdays: Tuesday-SaturdaySchedule: 6:00 AM-2:30PM The Facilities Maintenance Technician II is responsible for installing, maintaining, and repairing machinery, equipment, physical structures, and pipe and electrical systems in commercial or industrial facilities. (S)he will also support training of level I technicians. Essential...
-
Maintenance Technician II
1 month ago
Corona, California, United States 3M Full timeKey Responsibilities:Maintain and repair manufacturing equipment to ensure optimal performance and efficiency.Troubleshoot electrical and mechanical issues to minimize downtime and optimize production.Perform preventative maintenance tasks to extend equipment lifespan and reduce maintenance costs.Collaborate with the production team to ensure smooth...
-
Maintenance Technician II
4 weeks ago
Corona, California, United States 3M Full timeKey Responsibilities:As a Maintenance Tech at 3M, you will be responsible for maintaining and repairing manufacturing equipment, troubleshooting electrical and mechanical issues, and performing preventative maintenance tasks. You will also assist with equipment installations and upgrades, document maintenance activities and equipment performance, and...