Sheet Metal Fabricator
20 hours ago
RQC, LLC is a leading Design-Build firm specializing in commercial and governmental projects. We are seeking a skilled Sheet Metal Fabricator to join our team for ongoing work at Kings Bay Naval Submarine Base.
As a Sheet Metal Fabricator, you will be responsible for the fabrication and installation of ductwork, air distribution, and HVAC equipment on an active construction site. You will ensure that work is done in accordance with relevant codes and implement the required safety practices in support of RQ's Mission, Vision, and Values.
Requirements for this position include:
- High school diploma or G.E.D.
- 4 or more years of field or trade work experience as a journey-level sheet metal worker in a commercial, industrial, or facilities operations setting.
- Access to SUBASE Kings Bay is limited to United States citizens only.
RQC, LLC is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender, religion, marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition, sex, genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation.
All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for).
-
Sheet Metal Fabricator
21 hours ago
Saint Marys, Ohio, United States RQ Construction Full timeRQC, LLC is seeking skilled Sheet Metal Workers/Installers to join our self-perform team for ongoing work at Kings Bay Naval Submarine Base. As a Sheet Metal Fabricator, you will be responsible for the fabrication and installation of ductwork, air distribution, and HVAC equipment on an active construction site, ensuring that work is done in accordance with...
-
Manufacturing Engineer
5 days ago
Saint Marys, Ohio, United States Loc Performance Full timeJob SummaryWe are seeking a highly skilled Manufacturing Engineer to join our team at Loc Performance. As a key member of our operations team, you will be responsible for utilizing engineering methodology to support day-to-day operations, production planning, and continuous improvement.Key ResponsibilitiesManage new equipment kick-off meetings with pertinent...
-
Sheet Metal Fabricator
5 days ago
St. Marys, Georgia, United States RQ Construction Full timeJob Title: Sheet Metal InstallerWe are seeking skilled Sheet Metal Installers to join our team at RQC, LLC. as part of our ongoing work at Kings Bay Naval Submarine Base.Job Summary:As a Sheet Metal Installer, you will be responsible for the fabrication and installation of ductwork, air distribution, and HVAC equipment on an active construction site. You...
-
Sheet Metal Fabricator
3 days ago
Saint George, Utah, United States Flynn Group of Companies Full timeSheet Metal Fabrication and Installation OpportunityAbout the Role:We are seeking a skilled Sheet Metal Fabricator to join our team at Flynn Group of Companies. As a key member of our construction team, you will be responsible for fabricating and installing architectural metal wall panel systems and metal roofing. Key Responsibilities:- Fabricate or alter...
-
Sheet Metal Fabricator
4 days ago
Port Saint Lucie, Florida, United States Tradesmen International Full timeSheet Metal Worker Job DescriptionAt Tradesmen International, we're seeking a skilled Sheet Metal Worker to join our team. As a key member of our fabrication team, you'll be responsible for consistently meeting and exceeding deadlines for assigned tasks, producing high-quality parts that meet and exceed quality standards, and performing set-ups on various...
-
Aircraft Sheet Metal Fabricator
2 weeks ago
South Saint Paul, Minnesota, United States Aerotek Full timeAircraft Sheet Metal Mechanic Job DescriptionWe are seeking a skilled Structures Mechanic to join our team at Aerotek. As a key member of our team, you will be responsible for altering, repairing, and replacing sheet metal and fabricating sheet metal repairs for aircraft structures, such as wings, fuselage, floats, rigging, and surface controls.Key...
-
Sheet Metal Fabricator
22 hours ago
Saint-Priest-Palus, Nouvelle-Aquitaine, United States Atlantic Constructors, Inc. Full timeJob SummaryAtlantic Constructors, Inc. is seeking a skilled Sheet Metal Mechanic to join our team. The ideal candidate will have experience in fabricating, assembling, installing, and repairing sheet metal products using relevant equipment such as plenums, fire dampers, and diffusers.Key ResponsibilitiesInstalls distribution lines and equipment per plans,...
-
Sheet Metal Installer
3 days ago
Saint Marys, United States RQ Construction Full timeSince 1996, RQC, LLC. has been a leading player in commercial and governmental Design-Build economy. We now have a national presence with current projects, spanning coast to coast, including North Carolina. We offer management of projects throughout the United States, with our field operations' team members who work on location for each of our projects. We...
-
Metal Fabrication Specialist
4 weeks ago
Saint Paul, Minnesota, United States Aerotek Full timeAerotek **Job Summary:** As a Press Brake Operator at Aerotek, you will be responsible for setting up and operating brake presses, reading blueprints, and manufacturing tools, equipment, and other components from sheet metal or metal plates. **Key Responsibilities:** * Set up and operate brake presses to manufacture tools, equipment, and other components...
-
Sheet Metal Supervisor
3 weeks ago
Port Saint Lucie, Florida, United States PeopleReady Full timeSheet Metal Foreman Job DescriptionPeopleReady Skilled Trades is seeking a skilled Sheet Metal Foreman to lead a commercial project in Port Saint Lucie, FL.Key Responsibilities:Oversee quality installations and ensure compliance with project specifications.Plan and coordinate with project managers, foremen, and other departments to achieve project...
-
Sheet Metal Installation Supervisor
4 weeks ago
Port Saint Lucie, Florida, United States PeopleReady Full timeSheet Metal Foreman Job DescriptionWe are seeking a skilled Sheet Metal Foreman to lead our team in the installation of sheet metal ductwork for a commercial project in Port Saint Lucie, FL.Key Responsibilities:Read and interpret complex architecture drawings, 3D blueprints, and ceiling drawings to ensure accurate installations.Share in-depth knowledge of...
-
Sheet Metal Installer
1 week ago
PORT SAINT LUCIE, United States Tradesmen International Full timeTradesmen International - JobID: 4D777DA180124EB780C58F2FF24EBB9B [Installation / Fabricator] As a Sheet Metal Worker at Tradesmen International, you'll: Consistently meet and exceed deadlines for assigned tasks; Consistently produce parts that meet and exceed quality standards as determined by the Production Supervisor and/or Quality Inspector; Perform set...
-
Sheet Metal Laborer
2 weeks ago
Saint Cloud, Minnesota, United States Horizon Roofing, Inc. Full timeJob SummaryHorizon Roofing, Inc. is seeking a motivated and skilled Sheet Metal Laborer to join our team. As a key member of our crew, you will be responsible for installing and repairing sheet metal roofing and siding systems.Key ResponsibilitiesInstall and repair sheet metal roofing and siding systemsWork at heights and climb ladders safelyPerform physical...
-
Sheet Metal Laborer
4 weeks ago
Saint Cloud, Minnesota, United States Horizon Roofing, Inc. Full timeJob SummaryHorizon Roofing, Inc. is seeking a skilled Sheet Metal Laborer to join our team. As a key member of our roofing crew, you will be responsible for installing and repairing sheet metal roofing systems, ensuring a safe and efficient work environment.Key ResponsibilitiesInstall and repair sheet metal roofing systems, including cutting, bending, and...
-
Metal Fabricator
5 months ago
Bay Saint Louis, United States Point Eight Power Full timePoint EIght Power has immediate openings for Metal Fabricators at our facility in the Bay St. Louis/Waveland area. Get in on the ground floor of this exciting new opportunity. Operators Painters/Sandblasters Welder/Fitter Fabrication Assemblers Come join our Team and receive PAID benefits such as Hospitalization, Vacation, Paid...
-
Metal Fabrication Specialist
4 weeks ago
Bay Saint Louis, United States Point Eight Power Full timeMetal Fabrication Opportunities at Point Eight Power We are seeking skilled Metal Fabricators to join our team at our facility in the Bay St. Louis/Waveland area. As a Metal Fabricator at Point Eight Power, you will be responsible for fabricating and assembling metal components using various techniques and tools. **Required Skills:** * Experience in metal...
-
Fabrication Specialist
2 weeks ago
Saint Paul, Minnesota, United States Tradesmen International, Inc. Full timeJob Opportunity:We are seeking an experienced Fabrication Specialist to join our team at Tradesmen International, Inc.Job Summary:The successful candidate will be responsible for fabricating sheet metal for aircraft bodies, assembling and tooling sheet metal, and performing bonding processes using adhesives and small hand tools.Key Responsibilities:Fabricate...
-
HVAC Sheet Metal Supervisor
4 weeks ago
Saint-Priest-Palus, Nouvelle-Aquitaine, United States Atlantic Constructors, Inc. Full timeAbout the JobAtlantic Constructors, Inc. is seeking a skilled Sheet Metal Foreman to join our team. As a key member of our construction team, you will be responsible for overseeing the installation, modification, and repair of HVAC sheet metal and related systems.Key Responsibilities:Direct and supervise a team of HVAC sheet metal technicians and...
-
Sheet Metal Superintendent
3 days ago
Saint-Priest-Palus, Nouvelle-Aquitaine, United States Atlantic Constructors, Inc. Full timeJob Title: Sheet Metal SuperintendentAtlantic Constructors, Inc. is seeking a highly skilled and experienced Sheet Metal Superintendent to join our team. As a key member of our construction team, you will be responsible for overseeing the day-to-day activities of crews on assigned commercial construction projects.Key Responsibilities:Supervise field crews,...
-
Fabrication Specialist
4 weeks ago
Saint Cloud, Minnesota, United States Aerotek Full timeJob OpportunityAerotek is seeking a skilled Fabrication Specialist to join their team. As a Fabrication Specialist, you will be responsible for operating various sheet metal fabricating equipment to cut and fabricate metal products.Key Responsibilities:Operating laser, shear, break press, cutting equipment, and other industrial manufacturing machinesWorking...
-
Fabrication Assembler 3
3 weeks ago
Bay Saint Louis, Mississippi, United States Point Eight Power Full timeJob DescriptionThe primary objective of this role is to contribute to the manufacturing of Point Eight Power's switchgear product lines by assembling fabricated sheet metal according to drawing specifications.This position requires a strong understanding of manufacturing principles and the ability to interpret technical drawings and specifications.Key...
-
Fabrication Assembler 3
5 days ago
Bay Saint Louis, Mississippi, United States Point Eight Power Full timeJob Title: Fabrication Assembler 3At Point Eight Power, we are seeking a highly skilled Fabrication Assembler 3 to join our team. As a key member of our manufacturing department, you will play a crucial role in the production of our switchgear product lines.Key Responsibilities:Assemble fabricated sheet metal according to drawing specifications.Execute...