NDT Technician Trainee

3 days ago

Franklin, Massachusetts, United States Precision Castparts Corp Full time
Job Description:

This is a job for a NDT Technician Trainee position with a company located in the United States.

Job Summary:
As a NDT Technician Trainee, you will be responsible for participating in a training program for Non-Destructive Testing (NDT) as controlled by NAS 410 and PCC Procedure RI 4.1. You will gain work experience under the direct observation of a certified Level 2 or Level 3 or, a certified Level 1 or NDT instructor only when approved by the Responsible Level 3.

Key Responsibilities:

1. Training and Development:
Participate in a training program for NDT and gain work experience under the direct observation of a certified Level 2 or Level 3 or, a certified Level 1 or NDT instructor only when approved by the Responsible Level 3.

2. Essential Duties and Responsibilities:

a. Trainee:
An individual who is documented as participating in a training program for an NDT method and is in the process of becoming qualified for certification to Level 1-Limited, Level 1 or directly to Level 2 shall be considered a trainee.In the technique/method in which they are preparing for certification, trainees shall:

Be documented as a trainee and be actively participating in a training program for a stated NDT method for a limited and specified period of time.

Obtain experience under the direct observation of a Level 2 or Level 3 in the same method.

Obtain experience under the direct observation of a Level 1 or instructor only when approved by the responsible Level 3.

The trainee follows established procedures and part specific technique cards. Report faulty operations, defective material or solutions, and report these and any unusual conditions to proper supervision. An NDT trainee will be actively working toward obtaining their level one.

3. Secondary Duties and Responsibilities:

a. Compliance:
Must comply with all applicable safety requirements, policies, and procedures, while maintaining a clean, safe, and orderly work environment. Must participate in required training, medical monitoring, safety, and health evaluations and programs. Must wear required Personal Protective Equipment (PPE) in all designated areas of facility.

Perform all physical functions of position, standing, stooping, bending, sitting, walking, twisting, kneeling, turning, and lifting of materials up to 50 lbs.

Meet established attendance standards. Work overtime as needed. Must report any work-related injury or illness immediately to your direct supervisor. Perform other duties as assigned.

4. Education, Experience and Required Skills:
High school diploma or GED preferred but not required.

Must qualify to PCC Structurals Quality Control Procedure RI 4.1 The position requires a minimum of a high school diploma with the ability to read and follow established procedures and instructions.

The individual will be required to enter a formal training program to obtain a certification as a Level 1 technician.

Use simple arithmetic including decimals and fractions as needed. Must have the ability to read and work from established procedures, specifications, formulas, charts, tables, drawings, similar information. Entry level position with no previous experience in the method.

5. Additional Data:
Relocation is authorized for this position. This position requires use of information or access to production processes subject to national security controls under U.S.

export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)).

To be qualified to work in this facility, a successful applicant must be a U.S.

Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency.

The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.

Precision Castparts Corp.

is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.

Precision Castparts Corp

  • NDT Technician Trainee

    4 weeks ago

    Franklin, New Hampshire, United States Precision Castparts Corp Full time

    Job SummaryWe are seeking a highly motivated and detail-oriented NDT Trainee to join our team at Precision Castparts Corp. As an NDT Trainee, you will be responsible for participating in our comprehensive training program for Non-Destructive Testing (NDT) and gaining hands-on experience under the guidance of certified Level 2 or Level 3 technicians.Key...

  • NDT TRAINEE 1st

    4 weeks ago

    Franklin, United States Precision Castparts Corp Full time

    This is a job for a NDT TRAINEE 1st Shift position with a company located in Franklin, NH. Job Description: HOURLY PAY RATE: $22.00 - $25.00 * Depending upon experience * NDT Technician Trainees are required to be active participants in the training program for the Non-Destructive Testing (NDT) as controlled by NAS 410 and PCC Procedure RI 4.1. Trainees...

  • NDT Technician Trainee

    2 weeks ago

    Franklin, New Hampshire, United States Precision Castparts Corp Full time

    Job Description:This is a job for a NDT TRAINEE 1st Shift position with a company located in Franklin, NH.Job Summary:As a NDT Trainee, you will be responsible for participating in a training program for Non-Destructive Testing (NDT) as controlled by NAS 410 and PCC Procedure RI 4.1. You will gain work experience under the direct observation of a certified...

  • NDT Trainee

    2 weeks ago

    Franklin, New Hampshire, United States Precision Castparts Corp Full time

    Job SummaryWe are seeking a highly motivated and detail-oriented NDT Trainee to join our team at Precision Castparts Corp. As an NDT Trainee, you will be responsible for participating in a comprehensive training program to become certified in Non-Destructive Testing methods.Key ResponsibilitiesParticipate in a training program for Non-Destructive Testing...

  • NDT Trainee 2nd Shift

    3 weeks ago

    Franklin, New Hampshire, United States Precision Castparts Corp Full time

    NDT Trainee Job DescriptionAt Precision Castparts Corp, we are seeking a highly motivated and detail-oriented NDT Trainee to join our team. As an NDT Trainee, you will be responsible for participating in a training program to become certified as a Level 1 technician in Non-Destructive Testing (NDT).Key Responsibilities:Participate in a training program to...

  • NDT TRAINEE 1st Shift

    4 months ago

    Franklin, United States Precision Castparts Corp Full time

    HOURLY PAY RATE: $22.00 - $25.00* Depending upon experience * SUMMARY: NDT Technician Trainees are required to be active participants in the training program for the Non-Destructive Testing (NDT) as controlled by NAS 410 and PCC Procedure RI 4.1. Trainees gain work experience under the direct observation of a certified Level 2 or Level 3 or, a certified...

  • NDT TRAINEE 2nd Shift

    4 months ago

    Franklin, United States Precision Castparts Corp Full time

    HOURLY PAY RATE: $22.00 - $25.00* Depending upon experience * SUMMARY: NDT Technician Trainees are required to be active participants in the training program for the Non-Destructive Testing (NDT) as controlled by NAS 410 and PCC Procedure RI 4.1. Trainees gain work experience under the direct observation of a certified Level 2 or Level 3 or, a certified...

  • NDT Trainee

    1 week ago

    Franklin, New Hampshire, United States Precision Castparts Corp Full time

    Job Summary:We are seeking a highly motivated and detail-oriented NDT Trainee to join our team at Precision Castparts Corp. As an NDT Trainee, you will be responsible for participating in a comprehensive training program to become certified in Non-Destructive Testing (NDT) methods.Key Responsibilities:Participate in a training program to become certified in...

  • NDT Trainee 2nd Shift

    4 weeks ago

    Franklin, New Hampshire, United States Precision Castparts Corp Full time

    Job SummaryWe are seeking a highly motivated and detail-oriented NDT Trainee to join our team at Precision Castparts Corp. As an NDT Trainee, you will be responsible for participating in a training program for Non-Destructive Testing (NDT) and gaining work experience under the direct observation of a certified Level 2 or Level 3.Key...

  • NDT TRAINEE 1st Shift

    4 weeks ago

    Franklin, United States Precision Castparts Corp Full time

    CountryUnited States of AmericaState / CountyNew HampshireCityFranklinDivisionStructuralsCompanyTilton/FranklinFunctionOperationsWorkplace TypeOn-SitePosition typeFull TimeOpportunity ID10433 Company ProfileAt PCC Tilton, we believe that the safe air travel is essential as it ensures our family and friends return home safely each and every day. We support...

  • NDT TRAINEE 2nd Shift

    4 months ago

    Franklin, United States Precision Castparts Corp Full time

    CountryUnited States of AmericaState / CountyNew HampshireCityFranklinDivisionStructuralsCompanyTilton/FranklinFunctionOperationsWorkplace TypeOn-SitePosition typeFull TimeOpportunity ID10437 Company ProfileAt PCC Tilton, we believe that the safe air travel is essential as it ensures our family and friends return home safely each and every day. We support...

  • Non-Destructive Testing

    2 weeks ago

    Franklin, New Hampshire, United States Precision Castparts Corp Full time

    Job SummaryWe are seeking a highly skilled Non-Destructive Testing (NDT) Inspector to join our team at Precision Castparts Corp. As an NDT Inspector, you will be responsible for conducting non-destructive testing on complex castings to ensure their quality and integrity.Key ResponsibilitiesSet up and standardize equipment for non-destructive testingInterpret...

  • NDT Penetrant Technician Level II 2nd Shift

    2 weeks ago

    Franklin, New Hampshire, United States Precision Castparts Corp Full time

    Job SummaryWe are seeking a highly skilled NDT Penetrant Technician Level II to join our team at Precision Castparts Corp. As a key member of our operations team, you will be responsible for performing non-destructive testing inspections on complex castings using penetrant inspection methods.Key ResponsibilitiesSet up and standardize equipment, process...

  • NDT X-Ray Technician Level I

    2 months ago

    Franklin, United States Precision Castparts Corp Full time

    HOURLY PAY RANGE: $21.25 - $32.00*Depending upon experienceSUMMARY:ESSENTIAL DUTIES AND RESPONSIBLITIES:Participate in the X-RAY inspection of product castings. Follow instructions from customer or department supervision were provided or, in the absence of instructions. Operate X-RAY equipment and expose film following established techniques. Load and...

  • NDT X-Ray Technician TR OR Level I 2nd SHIFT

    2 months ago

    Franklin, United States Precision Castparts Corp Full time

    HOURLY PAY RANGE: $21.25 - $32.00*Depending upon experienceSUMMARY:ESSENTIAL DUTIES AND RESPONSIBLITIES:Participate in the X-RAY inspection of product castings. Follow instructions from customer or department supervision were provided or, in the absence of instructions. Operate X-RAY equipment and expose film following established techniques. Load and...

  • NDT Penetrant Technician Level II 2nd Shift

    2 months ago

    Franklin, United States Precision Castparts Corp Full time

    HOURLY PAY RATE: $ 25.00 - $33.00* Depending upon experience * SUMMARY: ESSENTIAL DUTIES AND RESPONSIBLITIES:Set up and standardize equipment, process parts, interpret and evaluate indications for acceptance or rejection, and document results. Be thoroughly familiar with the scope and limitations of the PT method. Be capable of providing the necessary...

  • NDT Penetrant Technician Level II 2nd Shift

    4 weeks ago

    Franklin, United States Precision Castparts Corp Full time

    HOURLY PAY RANGE: $21.25 - $38.75** Depending upon experience SUMMARY: ESSENTIAL DUTIES AND RESPONSIBLITIES: Set up and standardize equipment, process parts, interpret and evaluate indications for acceptance or rejection, and document results. Be thoroughly familiar with the scope and limitations of the PT method. Be capable of providing the necessary...

  • X-Ray Technician

    2 weeks ago

    Franklin, New Hampshire, United States Precision Castparts Corp Full time

    Job SummaryWe are seeking a highly skilled X-Ray Technician to join our team at PCC Structurals. As a key member of our operations team, you will be responsible for ensuring the quality and safety of our aerospace castings.Key ResponsibilitiesParticipate in the X-Ray inspection of product castings.Operate X-Ray equipment and expose film following established...

  • X-Ray Technician Level I

    2 weeks ago

    Franklin, New Hampshire, United States Precision Castparts Corp Full time

    Job SummaryWe are seeking a highly skilled X-Ray Technician Level I to join our team at Precision Castparts Corp. In this role, you will be responsible for participating in the X-RAY inspection of product castings, following instructions from customer or department supervision, and operating X-RAY equipment and exposing film following established...

  • Pharmacy Technician Specialist

    4 days ago

    Franklin, Tennessee, United States Appalachian Regional Healthcare Full time

    Job Summary:The Certified Pharmacy Technician Specialist will provide technical support to the pharmacy team, assisting in the preparation of sterile products, drug therapy research, and supply management. This role requires a strong understanding of pharmacy operations and a commitment to maintaining aseptic work environments.Key Responsibilities: Types and...