Aircraft Sheet Metal Fabricator
4 hours ago
This is a Military Technician position with the Army Reserve Aviation Command, Aviation Support Facility (ASF) MacDill Air Force Base (AFB) East located in MacDill AFB.
This position may offer a $10,000 recruitment bonus (see Additional Information Section).
Responsibilities:- Fabricates, lays out, forms and installs a variety of metal surfaces and structural members for aircraft.
- Examines aircraft flying surfaces and supporting sheet metal structures to determine extent of repair using applicable technical manuals.
- Removes damaged aircraft structural members and installs replacement members including beams and formers.
- Plans and lays out work using applicable work practices for repair and modification of aircraft metal parts and components.
- This position requires an active membership as a Soldier in the Army Reserve before a start date can be set.
- To learn more about minimum qualifications to join the Army Reserve, visit
- This position is being filled under the Direct Hire Authority for DoD Maintenance Activities
US Citizens
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social).
You will receive credit for all qualifying experience, including volunteer experience.
There is no specific length of training or experience required.
However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.
Minimum Qualifications (Screen Out Element):Ability to do the work of a(n) Sheet Metal Mechanic (Aircraft) without more than normal supervision.
To meet the screen out element, applicants should document experience or show the ability to do the following:
- Assisting with plans and lay outs of work, helping to determine repair work needed, operating various shop equipment, and helping to cut, bend and form metal parts.
Failure to meet this Screen out Element will result in an ineligible rating.
Physical effort:Makes repairs from ladders, scaffolds and toeboards and where parts worked on are in hard to reach places that require climbing, standing, stooping, bending, stretching, and working in tiring and uncomfortable positions.
Frequently lifts items that weigh up to 20 pounds and occasionally may lift and carry items up to 50 pounds.
Working conditions:Works in well-lighted but noisy shop and outside subject to heat, cold, and inclement weather.
There is continuous exposure to disagreeable odors, smoke, and fumes.
Wears protective masks, aprons, and goggles.
There are dangers of cuts, falls, burns, and injuries from hand and power tools.
-
Sheet Metal Mechanic
4 weeks ago
Tampa, Florida, United States US Army Full timeAbout the PositionThis is a Military Technician position with the Army Reserve Aviation Command, Aviation Support Facility (ASF) MacDill Air Force Base (AFB) East located in MacDill AFB.ResponsibilitiesFabricates, lays out, forms, and installs various metal surfaces and structural members for aircraft.Examines aircraft flying surfaces and supporting sheet...
-
Sheet Metal Fabricator
4 days ago
Tampa, Florida, United States Butler Aerospace and Defense Full timeJob Summary: Butler America Aerospace, LLC. is seeking a skilled Sheet Metal Technician to join our team. As a key member of our production team, you will be responsible for fabricating, assembling, installing, and repairing sheet metal products and equipment for general aviation aircraft.Key Responsibilities: * Determine project requirements, including...
-
Sheet Metal Fabricator
4 weeks ago
Tampa, Florida, United States Advanced Roofing Full timeAbout the RoleWe are seeking a highly skilled Sheet Metal Foreman to join our team at Advanced Roofing. As a key member of our fabrication and installation team, you will be responsible for setting up and operating fabricating machines to cut, bend sheet metal, and install metal roofing panels and components.Key ResponsibilitiesSet up and operate fabricating...
-
Sheet Metal Fabricator
7 days ago
Tampa, Florida, United States Tradesmen International Full timeMetal Fabrication Job Description **Job Summary:** We are seeking a skilled Sheet Metal Mechanic to join our team at Tradesmen International. As a key member of our fabrication team, you will be responsible for consistently meeting and exceeding deadlines for assigned tasks, producing high-quality parts, and performing set-ups on various machinery. **Key...
-
Sheet Metal Fabricator
4 weeks ago
Tampa, Florida, United States Tradesmen International Full timeSheet Metal Mechanic Job Description at Tradesmen International **Job Summary:** As a skilled Sheet Metal Worker at Tradesmen International, you will be responsible for consistently meeting and exceeding deadlines for assigned tasks, producing high-quality parts, and performing set-ups on machinery including press brake and manual punch press. **Key...
-
Sheet Metal Fabricator
1 month ago
Tampa, Florida, United States Tradesmen International Full time**Job Summary**Tradesmen International is seeking a skilled Sheet Metal Mechanic to join our team. As a key member of our fabrication department, you will be responsible for producing high-quality metal parts and components.**Key Responsibilities:**Meet and exceed deadlines for assigned tasksProduce parts that meet and exceed quality standards as determined...
-
Sheet Metal Fabricator
4 weeks ago
Tampa, Florida, United States Tradesmen International, Inc. Full timeJob Opportunity: Experienced HVAC / Sheet Metal Mechanics WantedWe are seeking skilled craftsmen to work on commercial HVAC and sheet metal projects in the Tampa, FL area. This is a first shift opportunity with a competitive pay range of up to $30/hour based on experience and skill level.Job Scope:Installation, alteration, fabrication, and repair of sheet...
-
HVAC and Sheet Metal Fabrication Expert
1 month ago
Tampa, Florida, United States Tradesmen International, Inc. Full timeJob Summary:We are seeking an experienced Sheet Metal Mechanic to join our team at Tradesmen International, Inc. As a key member of our commercial HVAC team, you will be responsible for installing, altering, fabricating, and repairing sheet metal products and equipment, ducts, and hoods for HVAC systems.Key Responsibilities:Utilize blueprints, drawings, and...
-
Sheet Metal Mechanic
9 hours ago
Tampa, Florida, United States Tradesmen International Full timeJob Opportunity: Sheet Metal MechanicTradesmen International is seeking experienced Sheet Metal Mechanics to join our team in the Tampa, FL area. As a Sheet Metal Mechanic, you will be responsible for installing, altering, fabricating, and repairing sheet metal products and equipment, ducts, and hoods for HVAC systems.Key Responsibilities:Utilize blueprints,...
-
Sheet Metal Mechanic
4 weeks ago
Tampa, Florida, United States Tradesmen International, Inc. Full timeJob Title: Sheet Metal MechanicJob Summary:We are seeking an experienced Sheet Metal Mechanic to join our team at Tradesmen International, Inc. As a Sheet Metal Mechanic, you will be responsible for installing, altering, fabricating, and repairing sheet metal products and equipment, ducts, and hoods for HVAC systems.Key Responsibilities:Utilize blueprints,...
-
Sheet Metal Craftsman
2 weeks ago
Tampa, Florida, United States Tradesmen International Full timeJob Opportunity for Experienced HVAC / Sheet Metal MechanicsTradesmen International is seeking skilled HVAC / Sheet Metal Mechanics to work on commercial projects in the Tampa, FL area. This is a first shift opportunity with a pay range of up to $30/hour based on experience and skill level.Job Scope:Commercial HVAC & Sheet Metal WorkInstall, Alter,...
-
Sheet Metal Mechanic
4 weeks ago
Tampa, Florida, United States Tradesmen International Full timeJob OpportunityWe are seeking an experienced Sheet Metal Mechanic to join our team at Tradesmen International.Job Scope:Commercial HVAC & Sheet Metal WorkInstall, Alter, Fabricate, and Repair Sheet Metal Products and Equipment, Ducts, and Hoods for HVAC SystemsRequirements:Able to Utilize Blueprints, Drawings, and Work OrdersBenefits:Tradesmen+ Rewards...
-
Sheet Metal Mechanic
3 weeks ago
Tampa, Florida, United States Tradesmen International Full timeJob OpportunityTradesmen International is seeking experienced HVAC / Sheet Metal Mechanics for projects in the Tampa, FL area.This is a first shift opportunity with a pay range of up to $30/hour based on experience and skill level.Job Scope:Commercial HVAC & Sheet Metal WorkInstall, Alter, Fabricate, and Repair Sheet Metal Products and Equipment, Ducts, and...
-
Sheet Metal Mechanic
1 month ago
Tampa, Florida, United States Tradesmen International, Inc. Full timeJob Summary:We are seeking an experienced Sheet Metal Mechanic to join our team at Tradesmen International, Inc. As a key member of our commercial HVAC team, you will be responsible for installing, altering, fabricating, and repairing sheet metal products and equipment, ducts, and hoods for HVAC systems.Key Responsibilities:Utilize blueprints, drawings, and...
-
Fabricator for Metal Work
3 weeks ago
Tampa, Florida, United States Snelling Full timeFabricator Job DescriptionSnelling is seeking a skilled Fabricator to join our team in Tampa, Florida. As a Fabricator, you will be responsible for reading and interpreting blueprints, cutting and shaping metal pieces, and assembling metal components using various techniques.Key Responsibilities:Blueprint Interpretation: Analyze and understand engineering...
-
Aircraft Structures Lead Technician
4 weeks ago
Tampa, Florida, United States STS Technical Services Full timeLead Aircraft Structures Technician OpportunitySTS Aviation Services is seeking a highly skilled Lead Aircraft Structures Technician to join our team in Melbourne, Florida. As a key member of our overhaul and repair station, you will be responsible for leading a team of technicians in maintaining and repairing commercial and large regional aircraft.Key...
-
HVAC Sheet Metal Technician
4 weeks ago
Tampa, Florida, United States PeopleReady Full timeJob SummaryWe are seeking a skilled HVAC Sheet Metal Mechanic to join our team at PeopleReady Skilled Trades. As a temporary role, you will support mechanical contractors throughout Tampa, FL, and enjoy weekly pay, health insurance benefits, and a flexible work schedule.Key ResponsibilitiesConstruct sheet metal components, cold boxes, and HVAC components...
-
HVAC Sheet Metal Technician
4 weeks ago
Tampa, Florida, United States PeopleReady Full timeJob SummaryWe are seeking a skilled HVAC Sheet Metal Mechanic to join our team at PeopleReady Skilled Trades. As a temporary role, you will support mechanical contractors throughout Tampa, FL, and enjoy weekly pay, health insurance benefits, and a flexible work schedule.Key ResponsibilitiesConstruct sheet metal components, cold boxes, and HVAC components...
-
Metal Fabrication Specialist
3 weeks ago
Tampa, Florida, United States Work Now Staffing Full timeJob Title: Press Brake OperatorWe are seeking a skilled Press Brake Operator to join our team at Work Now Staffing in Tampa, FL.Job Summary:The Press Brake Operator is responsible for setting up, operating, and maintaining woodworking and metal fabrication machines, including drill presses, lathes, shapers, routers, sanders, planers, and wood drilling...
-
Aircraft Structures Lead Technician
2 weeks ago
Tampa, Florida, United States STS Technical Services Full timeLead Aircraft Structures Technician OpportunitySTS Aviation Services is seeking a highly skilled Lead Aircraft Structures Technician to join our team in Melbourne, Florida. As a key member of our overhaul and repair station, you will be responsible for leading a team of technicians in the maintenance and repair of commercial and regional aircraft.Key...