Electrical Assembler
2 weeks ago
We are seeking a skilled Electrical Assembler to join our team at Atec. As an Electrical Assembler, you will be responsible for assembling electronic components, subassemblies, products, and systems.
Key Responsibilities- Read and understand work orders, follow production drawings, and sample assemblies, or receive verbal instructions regarding duties to be performed.
- Position and align parts in specified relationship to each other in jig, fixture, or other holding device.
- Crimp, stake, screw, bolt, solder, cement, press fit, or perform similar operations to join or secure parts in place.
- Mount assembled components, such as transformers, resistors, capacitors, integrated circuits, and sockets, on chassis panel.
- Connect component lead wires to printed circuits or route and connect wires between individual component leads and other components, connectors, terminals, and contact points.
- Install finished assemblies or subassemblies in cases and cabinets.
- Assemble and attach hardware, such as caps, clamps, knobs, and switches to assemblies.
- Perform intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color-coding parts and assemblies.
- Operate machines that press, mark, drill, or wind component parts.
- Adjust or trim materials from components to achieve specified electrical or dimensional characteristics.
- Mentor other Electrical Assemblers on tasks they have been assigned.
- Temporary assignment to various Atec facilities may be required as needed to support Atec operations.
- High School diploma or General Education Degree (GED) or three (3) years of experience and/or training or five (5) years of experience in a manufacturing environment and/or training; or combination of education and experience.
- Positive Performance Review (applies to internal personnel changes for current Atec, Inc. & subsidiary location employees).
- Must be able to read and interpret drawings and electrical schematics.
- Ability to perform soldering of components to PCB fabrications a plus.
- Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals.
The noise level in the work environment is usually moderate. Extended work hours and/or travel may occasionally be required.
-
Electrical Assembler
3 weeks ago
Stafford, Texas, United States Atec Full timeElectrical Assembler Job DescriptionAtec is seeking an experienced Electrical Assembler to join our team. As an Electrical Assembler, you will be responsible for assembling electronic components, subassemblies, products, and systems.Key Responsibilities:Assemble electronic components, subassemblies, products, and systemsRead and understand work orders,...
-
Electrical Panel Assembler
2 weeks ago
Stafford, Texas, United States AmeriTech Staffing, Inc. Full timeJob DescriptionAmeriTech Staffing, Inc. is seeking a skilled Electrical Panel Assembler to join our team in Stafford, TX. In this role, you will be responsible for assembling and wiring control panels, interpreting schematics, and ensuring that all assemblies meet industry standards.This position is ideal for someone with a strong background in electrical...
-
Electrical Systems Architect
3 weeks ago
Stafford, Texas, United States Jobot Full timePrincipal Electrical EngineerOur innovative and growing downhole drilling and engineering company is seeking a highly skilled Principal Electrical Engineer to lead our electrical system architecture design for logging and measurements while drilling products.Key Responsibilities:Design and develop high-temperature and high-shock resistant electronic circuits...
-
Electrical Systems Architect
4 weeks ago
Stafford, Texas, United States Jobot Full timePrincipal Electrical Engineer Needed For Innovative and Growing Downhole Drilling and Engineering Company**About Us**Our company, Jobot, is a leading provider of state-of-the-art drilling and measurement downhole tools. Our goal is to enable efficient hydrocarbons exploration and production worldwide.**Why Work With Us?*** Competitive base salary and overall...
-
Senior Electrical Systems Architect
3 weeks ago
Stafford, Texas, United States Jobot Full timePrincipal Electrical EngineerThis is a key role for our client, a leading provider of downhole drilling and measurement tools. The successful candidate will be responsible for leading the design and development of electrical systems for logging and measurements while drilling.Key Responsibilities:Design and develop high-temperature and high-shock-resistant...
-
Control Wireman Technician
2 weeks ago
Stafford, Texas, United States GENERAL TECHNOLOGIES INC Full timeJob Title: Control Wireman TechnicianGeneral Technologies Inc. is seeking a skilled Control Wireman Technician to join our Fabrication department. As a key member of our team, you will be responsible for coordinating the assembly of wired panels according to established production quality standards and engineering specifications.Key Responsibilities:Perform...
-
Aircraft Maintenance Specialist
1 month ago
Stafford, Texas, United States Atec Full timeJob SummaryWe are seeking a highly skilled and experienced Jet Engine Test Cell Technician to join our team at Atec. As a key member of our maintenance team, you will be responsible for ensuring the proper functioning of our Jet Engine Test Cells.Key ResponsibilitiesVerify technical data specifications to ensure compliance with reference standards.Prepare...
-
Atec Jet Engine Test Cell Specialist
4 weeks ago
Stafford, Texas, United States Atec Full timeJob SummaryWe are seeking a highly skilled Test Cell Technician to join our team at Atec. As a Test Cell Technician, you will be responsible for performing repair, installation, calibration, and modification of Jet Engine Test Cells.Key ResponsibilitiesVerify technical data specifications to ensure traceability to reference standards.Prepare technical order...
-
Atec Jet Engine Test Cell Technician
2 weeks ago
Stafford, Texas, United States Atec Full timeJob SummaryWe are seeking a highly skilled Jet Engine Test Cell Technician to join our team at Atec. The successful candidate will be responsible for performing repair, installation, calibration, and modification of Jet Engine Test Cells, as well as verifying proper equipment configuration to drawings and specifications.Key ResponsibilitiesVerify technical...
-
Jet Engine Test Cell Technician
1 month ago
Stafford, Texas, United States Atec Full timeJob SummaryAtec is seeking a skilled Jet Engine Test Cell Technician to join our team. As a key member of our maintenance team, you will be responsible for performing repair, installation, calibration, and modification of Jet Engine Test Cells.Key ResponsibilitiesVerify technical data specifications to ensure traceability to reference standards.Prepare...
-
Atec Jet Engine Test Cell Specialist
3 weeks ago
Stafford, Texas, United States Atec Full timeJob SummaryWe are seeking a highly skilled Jet Engine Test Cell Specialist to join our team at Atec International. As a key member of our team, you will be responsible for performing repair, installation, calibration, and modification of Jet Engine Test Cells.Key ResponsibilitiesVerify technical data specifications to ensure traceability to reference...
-
Manufacturing and Field Engineering Manager
3 weeks ago
Stafford, Texas, United States Brightpath Associates LLC Full timeJob DescriptionThe Manufacturing and Field Engineering Manager will oversee the build and commission of products. This individual will work closely with the CTO and VP of Technology to manage the company's build and commissioning to meet accelerating demand for the company's products. The ideal candidate will have previous experience working on field...
-
Electrical Systems Architect
3 weeks ago
Stafford, United States Jobot Full timeElectrical Engineer Needed for Innovative Drilling CompanyThis is a unique opportunity to join a growing and innovative company in the downhole drilling and engineering sector.About the RoleWe are seeking an experienced Electrical Engineer to lead the design and development of electrical systems for our logging and measurements while drilling products.Key...
-
Electrical Systems Architect
3 weeks ago
Stafford, United States Jobot Full timeJob OverviewWe are seeking a highly skilled Principal Electrical Engineer to lead our team in designing and developing innovative electrical systems for downhole drilling and measurement products.Key ResponsibilitiesDesign and develop high-temperature and high-shock-resistant electronic circuits for downhole useCoordinate fabrication, installation, and...
-
Electrical Systems Architect
4 weeks ago
Stafford, United States Jobot Full timeElectrical Systems ArchitectOur innovative and growing downhole drilling and engineering company is seeking a skilled Principal Electrical Engineer to lead electrical system architecture design for logging and measurements while drilling products.Key Responsibilities:Design, develop, and build high-temperature and high-shock-resistant electronic circuits for...
-
Electrical Systems Architect
3 weeks ago
Stafford, United States Jobot Full timeJob OpportunityElectrical Systems Architect NeededWe are seeking an experienced Electrical Systems Architect to lead the design of logging and measurements while drilling products. The ideal candidate will have a strong background in electrical system architecture and a proven track record of designing high-temperature and high-shock resistant electronic...
-
Electrical Drafting Specialist
2 weeks ago
Stafford, United States Atec, Inc. Full timeJob SummaryAtec, Inc. is seeking a skilled Electrical Drafting Specialist to join our team. As an Electrical Drafting Specialist, you will be responsible for creating accurate and complete working plans, complex assembly drawings, and detail drawings from rough or detailed sketches or notes. You will work closely with other engineering staff to revise and...
-
Principal Electrical Engineer
2 weeks ago
Stafford, United States Jobot Full timeDice is the leading career destination for tech experts at every stage of their careers. Our client, Jobot, is seeking the following. Apply via Dice today!Principal Electrical Engineer Needed For Innovative and Growing Downhole Drilling and Engineering CompanyThis Jobot Job is hosted by: Billy SurchAre you a fit? Easy Apply now by clicking the "Apply...
-
Principal Electrical Engineer
4 weeks ago
Stafford, United States Jobot Full timeJob DescriptionJob DescriptionPrincipal Electrical Engineer Needed For Innovative and Growing Downhole Drilling and Engineering CompanyThis Jobot Job is hosted by: Billy SurchAre you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume.Salary: $150,000 - $180,000 per yearA bit about us:Our clients goal is to provide the...
-
Process Engineering Internship Opportunity
4 weeks ago
Stafford, Connecticut, United States TTM Technologies Full timeAbout TTM TechnologiesTTM Technologies, Inc. is a leading global manufacturer of technology solutions, including engineered systems, radio frequency (RF) components, and RF microwave/microelectronic assemblies. Our company stands for time-to-market, representing how our time-critical, one-stop manufacturing services enable customers to shorten the time...
-
Stafford, Connecticut, United States TTM Technologies Full timeAbout TTM TechnologiesTTM Technologies, Inc. is a leading global manufacturer of technology solutions, including engineered systems, radio frequency (RF) components, and RF microwave/microelectronic assemblies, as well as quick-turn and technologically advanced printed circuit boards (PCBs). Our mission is to provide innovative solutions that enable our...
-
Process Engineering Internship Opportunity
4 weeks ago
Stafford, Connecticut, United States TTM Technologies Full timeAbout TTM TechnologiesTTM Technologies, Inc. is a leading global manufacturer of technology solutions, including engineered systems, radio frequency (RF) components, and RF microwave/microelectronic assemblies, as well as quick-turn and technologically advanced printed circuit boards (PCBs). Our mission is to enable customers to shorten the time required to...
-
Process Engineering Intern
1 month ago
Stafford, United States TTM Technologies Full timeTTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced...
-
Manufacturing Engineer
3 weeks ago
Stafford, United States TTM Technologies, Inc. Full timeAbout TTM Technologies, Inc.TTM Technologies, Inc. is a leading global manufacturer of technology solutions, including engineered systems, radio frequency components, and quick-turn and technologically advanced printed circuit boards.Job SummaryWe are seeking a highly skilled Manufacturing Engineer to join our team. The successful candidate will be...
-
Manufacturing Engineer
5 months ago
Stafford, United States TTM Technologies, Inc. Full timeTTM Technologies, Inc. – Publicly Traded US Company, NASDAQ (TTMI) – Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency (“RF”) components and RF microwave/microelectronic assemblies, and quick-turn and...
-
Fitness Equipment Specialist
3 weeks ago
Stafford, Virginia, United States Fitness Machine Technicians of Stafford Full timeJob Title: Fitness Equipment TechnicianWe are seeking a skilled Fitness Equipment Technician to join our team at Fitness Machine Technicians of Stafford. As a Fitness Equipment Technician, you will be responsible for performing repair and preventive maintenance services for residential and commercial customers.Key Responsibilities:Diagnose and repair various...
-
Manufacturing and Field Engineer Manager
2 weeks ago
Stafford, United States Brightpath Associates LLC Full timeJob DescriptionThe Manufacturing and Field Engineering Manager will manage the build and commission of the products. Previous experience working on field installations, startups, and commissioning of instrumentation, analyzers, or other complex equipment in industrial environments. They will work closely with the CTO and VP of Technology to manage the...
-
Field Operations Manager
3 weeks ago
Stafford, United States Brightpath Associates LLC Full timeJob DescriptionThe Manufacturing and Field Engineering Manager will manage the build and commission of the products. Previous experience working on field installations, startups, and commissioning of instrumentation, analyzers, or other complex equipment in industrial environments. They will work closely with the CTO and VP of Technology to manage the...
-
Manufacturing and Field Engineer Manager
3 weeks ago
Stafford, United States Brightpath Associates LLC Full timeJob DescriptionThe Manufacturing and Field Engineering Manager will manage the build and commission of the products. Previous experience working on field installations, startups, and commissioning of instrumentation, analyzers, or other complex equipment in industrial environments. They will work closely with the CTO and VP of Technology to manage the...