Diesel Mechanic Specialist

Ryder System is seeking a skilled Diesel Mechanic to join our team in Savannah, Georgia. As a mobile diesel technician, you will be responsible for performing routine maintenance and repairs on heavy-duty trucks.

• Perform vehicle maintenance and repair duties, including standard vehicle maintenance, preventive maintenance, complex repairs with minimal support;
• Diagnose and repair complex mechanical and electronic problems with minimal support, utilizing diagnostic computers/software when applicable;
• Interact with customers/drivers to properly determine the nature of complaints once assigned a task;
• Preventive maintenance responsibilities include but are not limited to: A/C & Heater, Brakes-Air, Brakes-Hydraulic, Cargo Handling/Transfer, Liftgates, Charging Systems (electrical), Clutch, Cooling Systems, Cranking System (electrical), Lighting System and Electrical Accessories, Drive Axles, Driveline, Gas Engines-All Engines, Fuel Systems, Steering and Non-driven Axles and Alignment, Suspension-Chassis and Cab, Tire and Wheel Maintenance, Vehicle Coupling System (PM).

• High school diploma or equivalent preferred;
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred;
• Basic tools, required;
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including: Routine preventative maintenance, which should include oil changes, brake and tire work; Diagnostics and repairs, including AC, electrical systems; Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs;
• Four (4) years or more Relevant work experience, preferred;
• NonCommercial Driver License CLASS E, preferred;
• Valid Commercial Driver License (CDL) CLASS A, preferred;
• Other State driver's license, as required;
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment;
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02;
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents;
• Must be able to drive Ryder vehicles;
• Ability to: Understand and adhere to Company policies in all areas; Complete repair orders with the Company established systems; Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors); Work independently and as a member of a team; Prioritize workload; Proven hands-on mechanic, customer service, and account management skills; Demonstrates customer service skills; Strong verbal and written communication skills; Flexibility to operate and self-driven to excel in a fast-paced environment; Self-starter and self-sufficient approach; Capable of multi-tasking, highly organized, with excellent time management skills; Detailed oriented with excellent follow-up practices; Entrepreneurial spirit.
• Additional requirements may be required in different locations and/or accounts.

• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair;
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support;
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable;
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns;
• Performs facility maintenance duties;
• Interacts with customers/drivers to properly determine the nature of complaint once assigned a task;
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics;
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
• Preventive maintenance (PM) and vehicle repairs responsibilities include but are not limited to:
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks;
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified;
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes;
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions;
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check;
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation;
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems;
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables;
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights;
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers;
• Driveline: Lubricate drive line; Inspect components for wear or damage;
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks;
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition;
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors;
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal;
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc;
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298);
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism;
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents;
• Performs other duties as assigned.
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.

• Generous Paid Time Off;
• Medical, Dental and Vision Insurance effective 30 days from hire date;
• Life Insurance and Disability Insurance Options;
• 401K Savings Plan with Ryder matching contributions;
• Discount on purchase of Ryder Common Stock;
• Employee Discounts on Automotive, Mobile plans, Travel and Hotels;
• Tuition Reimbursement;
• PPE & Uniforms provided at no cost;
• Paid Job training and development;
• $36.00 per hour based on experience;
• Sign-On Bonus: $2500 Ryder pays you $1250 at 30 days and $1250 90 days.