Assembler (2nd and 3rd shift)
1 month ago
Assembles parts and subassemblies at various states of assembly into torque converters, hydraulic valves, clutch packs, wet clutches and fan drives of differing sizes. Inspects parts, sub and final assemblies and test units such as fan drives, hydraulic valves, clutch packs and torque converters. Work is performed in the assembly and inspection areas of the Hydraulic Assembly Department.
- Load parts or subassemblies onto work bench, conveyors, into oven or into freezer
- Obtain part assembly dimensions and test requirements from part and assembly prints.
- Check quantities of component parts against orders to assure correct amounts.
- Use micrometers, height, OD and ID gauges to check dimensions and fit of parts
- Assemble various parts into sub-assemblies or into final assemblies as required.
- Visually check assembly work to properly fit parts together and to ensure that clean, deburred parts go into assembly.
- Make gear final inspection checking gears for damage, proper identification and fit.
- Secure assemblies in place by various means as required.
- Place assemblies on skid for inspection/transport and/or pack assemblies for storage as necessary.
- Set up hydraulic test equipment and test for pressure, temperature, RPM, torque, vibration, release/engage, flutter, gear noise, oil leaks, etc., as required.
- Check facing and tang plates for release during test.
- Record test data from gauge and dial readings.
- Record required labor information on labor sheet and/or labor entry software.
- Check and maintain calibration of gauges, flow meters and change as required.
- Check, clean and change filters (mainly oil) as required.
- Work with Manufacturing Engineering on fixtures as needed.
- Operate hoist to assist in lifting parts/assemblies as necessary.
- Operate air nozzles as necessary.
- Operate material handling equipment as necessary
- Responsible for following standard operating procedures
- Responsible for following safety rules
- Clean up work area as required.
We have other current jobs related to this field that you can find below
-
Assembler (2nd and 3rd Shift)
2 months ago
Rockford, United States Walterscheid Powertrain Group Full timeAssembles parts and subassemblies at various states of assembly into torque converters, hydraulic valves, clutch packs, wet clutches and fan drives of differing sizes. Inspects parts, sub and final assemblies and test units such as fan drives, hydraulic valves, clutch packs and torque converters. Work is performed in the assembly and inspection areas of the...
-
Assembler- Rockford 3rd Shift
3 days ago
Rockford, United States Byrne Electrical Specialists Full time** Assembler- Rockford 3rd Shift** **Job Category****:** Manufacturing **Requisition Number****:** WEEKE001370 Showing 1 location **Job Details** **Description** **Job Summary:**To produce quality parts within reasonable expectancies Sunday-Thursday 9pm to 5:30am (availability for overtime before or after shift) with shift premium of $1.00 for 3rd. This...
-
Assembler- Rockford 3rd Shift
11 hours ago
Rockford, United States Byrne Electrical Specialists Full time** Assembler- Rockford 3rd Shift** **Job Category****:** Manufacturing **Requisition Number****:** WEEKE001370 Showing 1 location **Job Details** **Description** **Job Summary:**To produce quality parts within reasonable expectancies Sunday-Thursday 9pm to 5:30am (availability for overtime before or after shift) with shift premium of $1.00 for 3rd. This...
-
Packer - 1st, 2nd, 3rd
2 weeks ago
Rockford, Illinois, United States QPS Employment Group Full timePosition Title: Packer - 1st, 2nd + 3rd ShiftWage: $15.00-$16.80 per hourShift: 1st, 2nd, 3rdHours: 7:00am-3:00pm; 3:00pm-11:00pm; 11:00pm-7:00amQPS Employment Group has a great Packer position available at a client in Rockford, IL. This is a 1st, 2nd, and 3rd shift position with the opportunity for hire.Packer Responsibilities include but are not limited...
-
Maintenance Tech
4 weeks ago
Rockford, United States Dairy Farmers of America, Inc. Full timeKemps, a DFA company, is hiring for a 2nd Shift Plant Maintenance Technician for our Rockford, IL facility. This is a full-time, union position with a starting pay of $30.20 - $34.20/hour based on experience / certifications. The Plant Maintenance Me Maintenance Technician, 3rd Shift, Maintenance Mechanic, Maintenance, Technical, Equipment
-
Maintenance Supervisor-2nd Shift
4 weeks ago
Rockford, United States Accuride Corporation Full timeThis position coordinates and assists in the installation, maintenance, servicing and repair of all equipment, buildings, and grounds necessary for the continuity of a safe manufacturing operation. Troubleshoots process and equipment problems, provides technical support throughout resolution, and develops/implements preventative actions. We are looking to...
-
Operations Technician
3 days ago
Rockford, United States Woodward Full timeCompleting assembly and test functions on valves, pumps and/or specialty parts. Testing, calibrating and validating samples. Documenting processes, following work instructions and verifying parts are meeting specifications. What We Are Looking For Operations Technician, Technician, Operations, 2nd Shift, Manufacturing
-
Assembly Technician 2nd Shift
1 day ago
Rockford, United States AtWork Group Full timeJob descriptionLocation: Maryville/Knoxville, TN Salary: $18 per hour3: 00 p.M. - 1: 30 a.M. Monday -Thursday 4 Day Work Week!OT is available Company Overview: This position is a leading manufacturing company with a strong presence in the Maryville/Knoxville, TN area.They take pride in producing high-quality products that serve the automotive industry, and...
-
Assembler
3 weeks ago
Rockford, United States PeopleLink Staffing Solutions Full timeJob DescriptionJob DescriptionAssembler Peoplelink Staffing Solutions in partnership with a prominent client in Lakeview within the Electrical Assembly Field. Assembler Job Summary: $14.00-14.501st Shift 6:30am-3pm, 2nd Shift 3:30pm-12amAble to identify parts and operate required hand tools to assemble electronic componentsMeet production quotasCleaning up...
-
Assemblers
4 weeks ago
Rockford, United States PeopleLink Staffing Solutions Full timeJob DescriptionJob DescriptionAssembler Peoplelink Staffing Solutions in partnership with a prominent client in Rockford within the Electrical Assembly Field. Assembler Job Summary: $14.00-14.501st Shift 6:30am-3pm, 2nd Shift 3:42pm-12:12am Shifts my vary depending on DepartmentAble to identify parts and operate required hand tools to assemble electronic...
-
Assemblers
4 weeks ago
Rockford, United States Peoplelink Staffing Solutions Full timeJob DescriptionJob DescriptionAssembler Peoplelink Staffing Solutions in partnership with a prominent client in Rockford within the Electrical Assembly Field. Assembler Job Summary: $14.00-14.501st Shift 6:30am-3pm, 2nd Shift 3:42pm-12:12am Shifts my vary depending on DepartmentAble to identify parts and operate required hand tools to assemble electronic...
-
Assembler
3 weeks ago
Rockford, United States Peoplelink Staffing Solutions Full timeJob DescriptionJob DescriptionAssembler Peoplelink Staffing Solutions in partnership with a prominent client in Lakeview within the Electrical Assembly Field. Assembler Job Summary: $14.00-14.501st Shift 6:30am-3pm, 2nd Shift 3:30pm-12amAble to identify parts and operate required hand tools to assemble electronic componentsMeet production quotasCleaning up...
-
Production Operators
4 weeks ago
Rockford, United States Flex-N-Gate Rockford, LLC Full timeOverview Flex-N-Gate is a leading manufacturer and supplier of components for the automotive industry, recently ranked 10th of the 150 Top North American Suppliers in “Automotive News.” A growing and vital company, Flex-N-Gate provides a great opportunity for hard-working and skilled individuals. Scope of the Position Flex-N-Gate is now...
-
Diesel Technician
4 weeks ago
Rockford, United States Airoldi Brothers Inc. Full timeFor over 80 years, Airoldi Brothers has provided innovative truck leasing solutions to customers of all sizes-from small businesses to large fleets. We have earned several exceptional customer service awards. Every member of the Airoldi team is committed to meeting our customers' needs. We are a family-owned and operated company that strives to make you feel...
-
Production Operators
2 weeks ago
Rockford, United States Flex-N-Gate Full timeOverview Flex-N-Gate is a leading manufacturer and supplier of components for the automotive industry, recently ranked 10th of the 150 Top North American Suppliers in “Automotive News.” A growing and vital company, Flex-N-Gate provides a great opportunity for hard-working and skilled individuals. Scope of the Position Flex-N-Gate is now hiring 2nd Shift...
-
2nd shift Spot Welder
4 weeks ago
Rockford, United States Bergstrom Inc Full timeJob DescriptionJob DescriptionSUMMARYThe Spot Welder is responsible for using resistant spot welding equipment to weld metal components and fabricated metal products.ESSENTIAL DUTIES AND RESPONSIBILITIESLay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Recognize, set...
-
Maintenance Tech
4 weeks ago
Rockford, United States Dairy Farmers of America Full time**Position** : Maintenance Tech - 3rd Shift **Location** : Rockford, Illinois **Requisition ID:** : 26238 Kemps, a DFA company, is hiring for a 2nd Shift Plant Maintenance Technician for our Rockford, IL facility. This is a full-time, union position with a starting pay of $30.20 - $34.20/hour based on experience / certifications. The Plant Maintenance...
-
3rd shift Sheet metal Fabricator
4 weeks ago
Rockford, United States Bergstrom Inc Full timeJob DescriptionJob DescriptionSUMMARYThe Sheet Metal Fabricator runs and creates the components that go into small and large scale HVAC products. Fabricators, are similar to assemblers, and might work on putting together one set of components or work on the finished product. This is done by hand with parts fabricated from machines in the production area....
-
Diesel Technician
4 weeks ago
Rockford, United States Airoldi Brothers Inc Full timeJob DescriptionJob DescriptionFor over 80 years, Airoldi Brothers has provided innovative truck leasing solutions to customers of all sizes-from small businesses to large fleets. We have earned several exceptional customer service awards. Every member of the Airoldi team is committed to meeting our customers' needs. We are a family-owned and operated...
-
Assembly Technician 2nd Shift
2 weeks ago
Rockford, TN, United States AtWork Group Full timeJob descriptionLocation: Maryville/Knoxville, TN Salary: $18 per hour3: 00 p.M. - 1: 30 a.M. Monday -Thursday 4 Day Work Week!OT is available Company Overview: This position is a leading manufacturing company with a strong presence in the Maryville/Knoxville, TN area.They take pride in producing high-quality products that serve the automotive industry, and...