Assembly Technician

4 weeks ago

Melbourne, United States Data Flow Systems Full time

Position Summary:

The Panel Technician is responsible for the assembly, wiring, testing, and troubleshooting of electrical control panels used to monitor and automate public utility water, wastewater, and stormwater systems. Attention to detail, technical expertise, and commitment to quality are crucial in ensuring the reliability and functionality of Data Flow control panels.

Job Duties:

Panel Assembly:

  • Read and interpret engineering drawings, schematics, and wiring diagrams to assemble electrical control panels according to specifications
  • Mount and install components, including PLCs (Programmable Logic Controllers), HMIs (Human-Machine Interfaces), relays, contactors, switches, and terminal blocks, in panel enclosures
  • Ensure proper alignment, spacing, and organization of components within the control panel relative to design drawings, and ensure the layout facilitates efficient wiring and troubleshooting

Wiring and Termination:

  • Wire electrical components and devices according to wiring diagrams and schematics, following industry standards and best practices
  • Perform terminations, crimping, and labeling of wires and cables to facilitate easy identification and maintenance
  • Verify wiring continuity, polarity, and insulation resistance to ensure electrical integrity and compliance with specifications

Panel Testing and Troubleshooting:

  • Conduct functional testing of control panels to verify proper operation and adherence to design requirements
  • Troubleshoot electrical issues, wiring discrepancies, and component failures using multimeters, oscilloscopes, and other diagnostic tools
  • Collaborate with engineers, technicians, and quality assurance personnel to resolve technical problems and implement corrective actions

Quality Assurance:

  • Inspect finished control panels for quality, completeness, and compliance with engineering standards and customer specifications
  • Document any deviations, discrepancies, or non-conformities observed during panel assembly and testing
  • Implement corrective measures and rework as necessary to rectify quality issues and ensure customer satisfaction

Safety and Compliance:

  • Adhere to safety protocols, including proper handling of electrical components, use of personal protective equipment (PPE), and compliance with electrical codes and regulations.
  • Maintain a clean and organized work area, following housekeeping and safety guidelines to prevent accidents and injuries

Competencies Needed to Support the Following Core Values

  • Make it SIMPLE & EASY for our customers.
  • People first: PROACTIVE & EMPOWERED
  • HONESTY, HUMILITY & INTEGRITY in everything we do
  • Never mistake ACTIVITY FOR ACHIEVEMENT
  • REPUTATION above all
  • Committed to CONTINUOUS IMPROVEMENT

Job Requirements:

  • Proven experience in panel assembly, wiring, and testing within an industrial automation or electrical control panel manufacturing environment
  • Proficiency in reading and interpreting electrical schematics, wiring diagrams, and engineering drawings
  • Familiarity with electrical components and devices commonly used in control panels, including PLCs, HMIs, relays, contactors, switches, and terminal blocks
  • Ability to use hand and power tools safely and effectively for panel assembly, wiring, and termination tasks
  • Strong attention to detail and quality, with the ability to follow written instructions and work independently or as part of a team
  • Excellent troubleshooting skills and problem-solving abilities, with a methodical approach to diagnosing electrical issues and implementing solutions
  • Effective communication skills, both verbal and written, with the ability to collaborate with colleagues and communicate technical information clearly
  • Commitment to safety, quality, and continuous improvement, with a proactive attitude towards learning new skills and techniques
  • Willingness to work flexible hours and overtime as needed to meet production deadlines and customer requirements

Education Requirements:

  • High school diploma or equivalent; additional technical training or certification in electrical wiring, electronics, or a related field is preferred.

Physical Demands:

  • Body Positions: Includes standing, sitting, walking, lifting (up to 60 lbs), talking, and hearing safety alerts
  • Work will be indoors in a temperature-controlled environment.
  • The typical office environment noise level is low to moderate, though hearing protection and other personal protective equipment will be required when using power tools.

Physical Demands:

  • Body Positions: Includes standing, sitting, walking, lifting (up to 60 lbs), talking, and hearing safety alerts
  • Work will be indoors in a temperature-controlled environment.
  • Typical office environment noise level is low to moderate, though hearing protection and other personal protective equipment will be required with the use of power tools.

  • Assembly Technician

    1 month ago

    Melbourne, United States Data Flow Systems, LLC Full time

    Position Summary:The Panel Technician is responsible for the assembly, wiring, testing, and troubleshooting of electrical control panels used to monitor and automate public utility water, wastewater, and stormwater systems. Attention to detail, technical expertise, and commitment to quality are crucial in ensuring the reliability and functionality of Data...

  • Assembly Technician

    4 weeks ago

    Melbourne, United States Data Flow Systems, LLC Full time

    Position Summary:The Panel Technician is responsible for the assembly, wiring, testing, and troubleshooting of electrical control panels used to monitor and automate public utility water, wastewater, and stormwater systems. Attention to detail, technical expertise, and commitment to quality are crucial in ensuring the reliability and functionality of Data...

  • Assembly Technician

    2 weeks ago

    Melbourne, United States Data Flow Systems, LLC Full time

    Position Summary:The Panel Technician is responsible for the assembly, wiring, testing, and troubleshooting of electrical control panels used to monitor and automate public utility water, wastewater, and stormwater systems. Attention to detail, technical expertise, and commitment to quality are crucial in ensuring the reliability and functionality of Data...

  • Electrical Panel Assembler

    3 weeks ago

    Melbourne, United States Broadleaf Results Full time

    **Here's what you'd do**: - The Panel Technician is responsible for the assembly, wiring, testing, and troubleshooting of electrical control panels used to monitor and automate public utility water, wastewater, and stormwater systems. - Read and interpret engineering drawings, schematics, and wiring diagrams to assemble electrical control panels according...

  • Manufacturing Assembly

    2 months ago

    Melbourne, United States Comtec Ltd Full time

    Title : Engineering Technician (Manufacturing Assembly) Location : Palm Bay, FL Job Type: 4-12 months with possibility of Temp to Perm Job Description: This is a hands-on manufacturing position and requires technicians knowledgeable in aerospace assembly and high-reliability procedures. Preferred Additional Skills: 4 years of experience...

  • Manufacturing Assembly

    4 weeks ago

    Melbourne, United States Comtec Ltd Full time

    Title : Engineering Technician (Manufacturing Assembly) Location : Palm Bay, FL Job Type: 4-12 months with possibility of Temp to Perm Job Description: This is a hands-on manufacturing position and requires technicians knowledgeable in aerospace assembly and high-reliability procedures. Preferred Additional Skills: 4 years of experience...

  • Manufacturing Assembly

    2 months ago

    Melbourne, United States ComTec Full time

    Title : Engineering Technician (Manufacturing Assembly) Location : Palm Bay, FL Job Type: 4-12 months with possibility of Temp to Perm Job Description: This is a hands-on manufacturing position and requires technicians knowledgeable in aerospace assembly and high-reliability procedures. Preferred Additional Skills: 4 years...

  • Manufacturing Assembly

    4 weeks ago

    Melbourne, United States ComTec Full time

    Title : Engineering Technician (Manufacturing Assembly) Location : Palm Bay, FL Job Type: 4-12 months with possibility of Temp to Perm Job Description: This is a hands-on manufacturing position and requires technicians knowledgeable in aerospace assembly and high-reliability procedures. Preferred Additional Skills: 4 years...

  • Assembly Technician

    4 weeks ago

    Melbourne, United States LAUNCH Technical Workforce Solutions Full time

    Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations. Analyze processes and process improvement. May be responsible for distributing activities and goals, coordinate and guide technical support groups. Assist with new operators, as well as assist in processes analysis. Performs a variety of tasks ranging from...

  • 516 - Electronics Assembly Technician

    3 weeks ago

    Melbourne, United States Azure Summit Technology Full time

    **Are you in?** Do you work well in a team environment and on your own as an individual contributor? Do you know how to set the bar high and achieve goals for yourself and bring others along with you? Do you work hard and play hard? Do you want to help the company succeed and build your skill set and further your career at the same time? Azure Summit...

  • 505 - Electronics Assembly Technician

    2 weeks ago

    Melbourne, Florida, United States Azure Summit Technology Full time

    Are you in?Do you work well in a team environment and on your own as an individual contributor? Do you know how to set the bar high and achieve goals for yourself and bring others along with you? Do you work hard and play hard? Do you want to help the company succeed and build your skill set and further your career at the same time? Azure Summit Technology...

  • Engineering Technician B

    2 weeks ago

    Melbourne, United States L3Harris Technologies Full time

    **Job Title: Engineering Technician B** **Job Code: 12090** **Job Location: Melbourne, Florida** **Job Schedule: 9/80** The Engineering Technician B will work under the guidance of the manufacturing engineer or site lead for the manufacturing build of the Commercial Broadband Satelite Program (CBSP) hardware. This position is responsible for the assembly...

  • Electronics Technician

    2 months ago

    Melbourne, United States Avidyne Full time

    Avidyne is at the forefront of the aviation industry, integrating advanced avionics into both conventional and novel advanced air mobility (AAM) aircraft. We are not just about creating products; we are about revolutionizing the way people fly. About the Electronics Technician position Avidyne's Electronics Technicians play a crucial role in maintaining...

  • Electronics Technician

    4 weeks ago

    Melbourne, United States Avidyne Full time

    Avidyne is at the forefront of the aviation industry, integrating advanced avionics into both conventional and novel advanced air mobility (AAM) aircraft. We are not just about creating products; we are about revolutionizing the way people fly. About the Electronics Technician position Avidyne's Electronics Technicians play a crucial role in maintaining...

  • Support Technician

    3 weeks ago

    Melbourne, United States Gauzy Full time

    **About The Position** Gauzy Vision Systems is a world-leading smart Glass and window shade manufacturer for the Commercial and Business Jet markets. We are looking for a **Production Technician** to join our team in Florida. As a Production Technician, you will assemble small components and sub-assemblies to create a larger top-level part in accordance...

  • Fiber Optic Termination Technician

    4 weeks ago

    Melbourne, United States Fibertronics Inc. Full time

    Fibertronics is seeking full time fiber optic cable assembly technicians to join out team. The termination technician will be assigned production orders, reading the technical drawings and building the assemblies to order. This position requires excellent hand-eye coordination, attention to detail, good eye sight and good time management. Experience not...

  • Senior Test Technician

    2 months ago

    Melbourne, United States Leonardo DRS, Inc. Full time

    Provide technical support to engineers and scientist on complex components, devices, material, products, processes and/or equipment Work from complex wiring and assembly drawings, operation sheets, engineering specifications and sketches and running Test Technician, Technician, Technical Support, Senior, Mechanical, Manufacturing, Technology

  • Lead Test Technician

    2 months ago

    Melbourne, United States Leonardo DRS, Inc. Full time

    Provide technical support to engineers and scientist on a variety of complex components, devices, material, products, processes and/or equipment Work from complex wiring and assembly drawings, operation sheets, engineering specifications and sketches Test Technician, Technician, Technical Support, Lead, Mechanical, Manufacturing, Business Services

  • Engineering Technician

    4 weeks ago

    Melbourne, United States Aeronix Inc. Full time

    Job DescriptionJob DescriptionEntry to Mid level electrical technician with 1-10 years experience and with good potential to take on advanced challenges.BS or AS in Engineering Technology or equivalent with Electrical Engineering concentration with a broad foundation of theoretical and practical knowledge in the areas of electrical and electronics...

  • 340 - Mechanical Floor Technician

    4 weeks ago

    Melbourne, United States Azure Summit Technology Full time

    **Are you in?** Do you work well in a team environment and on your own as an individual contributor? Do you know how to set the bar high and achieve goals for yourself and bring others along with you? Do you work hard and play hard? Do you want to help the company succeed and build your skill set and further your career at the same time? Azure Summit...