IACS Tech- 2nd shift

5 months ago

Elgin, United States NTN Bearing Full time
Job Description

Summary Troubleshoot and repair PLC based electrical control system. Electrical and Electronic troubleshooting of CNC turning, drilling and grinding machines. Monitor modifies and write PLC program. Plan layout and wire electrical control panel and install on industrial machinery. Good understanding of mechanical, hydraulic, and pneumatic system.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

  • Troubleshoot automated production machinery, identify root cause for trouble and repair as necessary.
  • Diagnose and replace faulty electrical and electronic components of machine such as relays, switches, motors, positions sensing devices, printed circuit boards and PLCs.
  • Connect electric power to machines and equipment, and control wires between machines and monitor equipment.
  • Plan layout of wiring and install wiring, conduit, and electrical apparatus in buildings. Maintain interior and exterior lighting systems.
  • Work with mechanics and lead persons to diagnose faulty machinery.
  • Able to make simple control system using PLC (i.e Panel layout, wiring and testing).
  • Able to read and make electrical schematic drawings.


Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience

Associate degree or equivalent experience and High school diploma or general education degree (GED).

Language Skills

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence.

Mathematical Skills

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

Reasoning Ability

Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Computer Skills

To perform this job successfully, an individual should have knowledge of Electronic device application software.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee may be exposed to moving mechanical parts; fumes or airborne particles; risk of electrical shock and vibration. The employee is occasionally exposed to high, precarious places and outside weather conditions. The noise level in the work environment is usually loud. Hard hats, steel toe safety shoes, and safety glasses are required in all production areas. Hearing protection is encouraged and may be required in specific areas.

  • IACS Tech- 2nd shift

    5 months ago

    Elgin, United States NTN Bearing of America Full time

    1500 Holmes Rd, Elgin, Illinois 60123 Hourly Summary Troubleshoot and repair PLC based electrical control system. Electrical and Electronic troubleshooting of CNC turning, drilling and grinding machines. Monitor modifies and write PLC program. Plan layout and wire electrical control panel and install on industrial machinery. Good understanding of mechanical,...

  • IACS Technician

    4 weeks ago

    Elgin, Illinois, United States NTN Bearing of America Full time

    Job SummaryWe are seeking a highly skilled IACS Technician to join our team at NTN Bearing of America. The successful candidate will be responsible for troubleshooting and repairing PLC-based electrical control systems, as well as monitoring, modifying, and writing PLC programs.Key ResponsibilitiesTroubleshoot automated production machinery and identify root...

  • 2nd Shift CNC Lead

    3 months ago

    Elgin, United States Carr Lane Manufacturing Co Full time

    2nd Shift CNC LeadJob Location: Elgin, TXStarting Pay: Determined based on experience.Job Type: Full TimeSchedule: 3:00pm - 1:30 am; Monday - ThursdayWork Environment: OnsiteAbout Us:Carr Lane Manufacturing provides a large selection of tooling components, clamps, fixturing and related work holding products for all areas of manufacturing. Based in St. Louis,...

  • Machine Operator 2nd Shift Position

    4 weeks ago

    Elgin, Illinois, United States JobSquad Staffing Solutions Full time

    Job SummaryJobSquad Staffing Solutions is seeking a skilled Machine Operator to join our team on the 2nd shift. As a key member of our production team, you will be responsible for ensuring the smooth operation of our manufacturing processes.Key ResponsibilitiesLoad and unload raw materials into processing machinery to maintain a high level of production...

  • Truck Driver

    3 months ago

    Elgin, United States John B Sanfilippo & Son, Inc. Full time

    The truck driver operates JBSS vehicles to deliver and pick up product. Duties and Responsibilities: Delivers and picks up JBSS orders. Transfers products between JBSS facilities. Acts as a liaison to customers. Picks-up and returns products and raw Truck Driver, 2nd Shift, Driver, Commercial Driver

  • Laborer (2nd Shift)

    1 month ago

    Elgin, United States Dolese Bros. Full time

    The Dolese Promise is built on a foundation of integrity driven by our passion for quality, safety, and reliability. We are one of Oklahoma's most respected employee-owned companies because of our people and our values. We strongly believe in positively impacting our communities through our products, our actions, and our financial support. Being a part of...

  • Laborer (2nd Shift)

    4 weeks ago

    Elgin, United States Dolese Bros. Full time

    The Dolese Promise is built on a foundation of integrity driven by our passion for quality, safety, and reliability. We are one of Oklahoma's most respected employee-owned companies because of our people and our values. We strongly believe in positively impacting our communities through our products, our actions, and our financial support. Being a part of...

  • 2nd Shift CNC Machine Operator

    2 weeks ago

    Elgin, Illinois, United States Chase Technical Full time

    Job SummaryWe are seeking an experienced CNC Machine Operator to join our production team for a 2nd shift position. The ideal candidate will have a strong background in operating CNC machines and be able to work independently with minimal supervision.Key ResponsibilitiesSet up, operate, and tend to sawing machines and other CNC equipmentAdjust saw blades and...

  • Molding Operator

    4 weeks ago

    Elgin, United States ADMO, Inc. Full time

    Job DescriptionJob DescriptionWe are currently looking for operators for 2nd and 3rd shift2nd shift: 3pm - 11:30pm3rd shift: 11pm - 7:30amAlternating weekly schedule M-F, T-SJob Purpose:The Molding Operator operates the molding machine to produce plastic injection molded parts, trim parts as needed and package parts at the machine.Main Duties and...

  • Assembler 1st Shift And 2nd Shift Openings !!!

    6 days ago

    Elgin, United States Aerotek Full time

    Job DescriptionJob DescriptionAssembler  $16/hour Elgin, Illinois  Job description:  Join our team as an Assembler, where you will be working with electronic devices, following processes to refurbish and repackage  Qualifications: Assembly Repair Packing Attention to detail Palletizing Fast paced Comfortable being on your feet for the...

  • Process Technician

    2 months ago

    Elgin, United States ADMO, Inc. Full time

    Job DescriptionJob DescriptionWhat you really need to know:ADMO is a growing company that specializes in plastic injection molding. We are looking for motivated team members who have solid processing and diagnostic skills. This position is currently open for a 2nd shift, but a great candidate may have other options. We are currently investing in new machines...

  • 2nd shift CNC Machine Operator

    3 weeks ago

    Elgin, United States Chase Technical Full time

    Job DescriptionJob DescriptionWe are hiring a 2nd shift CNC Machine Operator that will be available to work Monday-Friday and Saturday's as necessary depending on production. We are seeking an experience operator that will be skilled and be able to perform the following responsibilities. ResponsibilitiesSet up, operate, or tend to sawing machinesSet up,...

  • Travel CT Tech in Elgin, ND

    2 weeks ago

    elgin, United States MSSI (Medical Staffing Solutions, Inc) Full time

    9 hours per week. 2 years of experience required. ND state radiology license, ARRT, and AHA BLS required.Need to be comfortable performing general x-rays and CTs with and without contrast. Job Details: Job Title : CT Tech - Elgin - North Dakota - 24177Primary Specialty : CT TechProfession : TechCity : ElginState : North DakotaShift Details : Friday, 0800 -...

  • Travel CT Tech in Elgin, ND

    7 days ago

    Elgin, United States MSSI Full time

    9 hours per week. 2 years of experience required. ND state radiology license, ARRT, and AHA BLS required.Need to be comfortable performing general x-rays and CTs with and without contrast. Job Details: Job Title : CT Tech - Elgin - North Dakota - 24177 Primary Specialty : CT Tech Profession : Tech City : Elgin State : North Dakota Shift Details : ...

  • Floor Assembler- 2nd shift

    2 weeks ago

    Elgin, United States Flender Corporation Full time

    Company Description Flender is a leading global supplier for mechanical drive systems and has the reputation for highest performance, innovation, quality, and reliability of mechanical components for 120 years. We're now hiring a talented Floor Assembler join our team in Elgin, IL on a full-time basis. If you're eager for your next challenge, Flender is a...

  • Travel CT Tech

    1 week ago

    Elgin, United States Axis Medical Staffing Full time

    Axis Medical Staffing is seeking an experienced CT Tech for an exciting Travel Allied job in Elgin, ND. Shift: 5x8 hr days Start Date: 12/09/2024 Duration: 13 weeks 9 hours per week. 2 years of experience required. ND state radiology license, ARRT, and AHA BLS required. Need to be comfortable performing general x-rays and CTs with and without contrast....

  • CT / X-Ray Tech Contract Position in Elgin, ND

    4 weeks ago

    Elgin, Illinois, United States Soliant Full time

    Job Details: Soliant Health is seeking a skilled CT / X-Ray Tech for a 13-week travel assignment in Elgin, ND. The ideal candidate will have a minimum of 1+ years of imaging experience and hold current certifications in ARRT and BLS - AHA.Assignment Requirements:Shift: 4x10s, day shiftsStart Date: ASAPBenefits:Weekly payHealth insurance (medical, dental, and...

  • Diet Office Assistant- PRN 2nd Shift

    1 month ago

    Elgin, United States Advocate Aurora Health Full time

    Department: 11903 Advocate Sherman Hospital - Food and Nutrition Status: Part time Benefits Eligible: No Hours Per Week: 0 Schedule Details/Additional Information: 3:00p-7:00p or 3:30p to 7:30p Rotating Weekends and Holidays 2-3 shifts a week Major Responsibilities: Coordinates all diet office activities as related to the patient trayline and production in...

  • Welder/Certified Welder

    2 months ago

    Elgin, United States Federal Signal Full time

    Essential Job Duties and Responsibilities: Pull order, review blue print, verify material, set up necessary fixtures and tack as appropriate to complete welding process. Brace and clamp parts as required to avoid distortion and for proper alignment. Regulate welding equipment current and voltage. Maintain proper weld penetration, quality fit and overall...

  • Machine Operator I

    5 months ago

    Elgin, United States John B. Sanfilippo & Son Inc Full time

    Summary of the Position:The Machine Operator I operates and maintains one simple machine or one machine line and ensures it is running efficiently with minimum supervision. Functions of the Position:Sets up machine-loading and monitors to ensure it is running efficiently.Follows work order, quality controls and sanitation procedures concerning weights,...