Packaging Machine Operator

4 days ago

Charlotte, United States Snyder's-Lance Full time

The Packaging Machine Operator, under the general supervision, is responsible for the safe, efficient and continuous operation of snack packaging machinery. Essential Job Duties Reads production schedule and plans accordingly. Efficiently maintains the operation of packaging machinery by monitoring codes, dates and prices. Maintains an adequate supply of roll stock and ensures all packaging materials available for each machine. Adjusts machine micro logic set-up as needed to maintain an efficient and low waste operation. Understands and demonstrates the necessary skills involved to efficiently operate packaging equipment in so far as, but not limited to, machine setups, changeovers, proper running, procedural adjustments, sanitation cleanup, and shutdown. Properly plans ahead for machine changeovers and efficiently changing from one product item to another. Monitors and adjusts each machine to ensure proper cut off of film and bags have proper end seals and back seals as required. Ensures machines are running at standard speeds. Monitors and checks weights and product appearance as required. Properly accounts for product run off and handles this product accordingly; sorts through and reworks all good product. Keeps machines and work areas clean, wipes packaging machines off and blows down area when required. Immediately reports any maintenance problems to Maintenance Mechanic or Supervisor. Practices and adheres to appropriate safety and hygiene guidelines/procedures for safe housekeeping and personal protection. Stores supplies in designated areas. Keeps work area aisles/exits clear and free from obstruction; removes trash from work area floor. Follows instructions for safe lifting/carrying of various sizes, shapes and weights; identifies/reports issues with equipment; reports all job-related injuries to supervision. May provide leadership and direction to packers. May be qualified to perform as Back-up Packaging Coordinator, or other technical/skilled position. If applicable, may monitor and replenish seasoning on overhead to ensure proper seasoning coverage on product. Mandatory overtime may be required. May perform other duties as required. Knowledge and Skill Requirements Candidate must be comfortable communicating to team members and management staff. Candidate will be trained and must be able to perform all job functions within the department at any given time. Prerequisite: Complete training and any applicable examinations. Education and Experience High School Diploma or GED and/or 1-year production experience in a manufacturing environment required. Professional Licenses or Certifications Where applicable, Forklift Certification obtained. Physical Demands Must be able to comply with the physical demands of constantly lifting and moving stock by hand or with manual equipment (including pallet jacks and forklifts). Ability to lift 40+ lbs. on a regular basis, and occasionally be able to lift/move more than 50+ lbs. with mechanical or peer assistance. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and applicants in all aspects of the employment relationship, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, veteran status, disability, age, religion, or any other classification protected by law.

  • Die Cutting Machine Operator

    4 months ago

    Charlotte, United States Green Bay Packaging Full time

    Position Overview Responsible for all activities associated with running the Eterna die cutter including setup, operation, cleanup and recommending improvements to operations. ResponsibilitiesSetup, run and troubleshoot die cutting machine. Read die line prints and follow work instructions. Ensure all quality standards are met. Complete production paperwork...

  • Die Cutting Machine Operator

    2 days ago

    Charlotte, North Carolina, United States Green Bay Packaging Full time

    Job SummaryWe are seeking a highly skilled Die Cutting Machine Operator to join our team at Green Bay Packaging. As a key member of our production team, you will be responsible for operating and maintaining our die cutting machines, ensuring high-quality production and meeting production deadlines.Key ResponsibilitiesMachine Operation: Set up, run, and...

  • Packaging Machine Operator

    3 days ago

    Charlotte, North Carolina, United States Campbell Soup Company Full time

    Job SummaryWe are seeking a skilled Packaging Machine Operator to join our team at Campbell Soup Company. As a Packaging Machine Operator, you will be responsible for the safe and efficient operation of snack packaging machinery.Key ResponsibilitiesReads production schedule and plans accordingly.Maintains the operation of packaging machinery by monitoring...

  • Die Cutting Machine Operator

    4 months ago

    Charlotte, United States GREEN BAY PACKAGING, INC. Full time

    Position Overview: Responsible for all activities associated with running the Eterna die cutter including setup, operation, cleanup and recommending improvements to operations. Responsibilities: Setup, run and troubleshoot die cutting machine.Read die line prints and follow work instructions.Ensure all quality standards are met. Complete production paperwork...

  • CNC Machining Specialist

    1 week ago

    Charlotte, North Carolina, United States King Machine Companies Full time

    Job OverviewWe are seeking a skilled CNC Machining Specialist to join our team at King Machine Companies. This role is crucial for the production of high-quality components within the tire manufacturing sector.Key Responsibilities:Set up and operate CNC machinery to fabricate sidewall components and various parts for the tire industry.Program machine tools,...

  • Machine Operator

    4 days ago

    Charlotte, North Carolina, United States Aerotek Full time

    Aerotek Job DescriptionJob Title: Machine TechnicianJob Summary:We are seeking a skilled Machine Technician to join our team at Aerotek. As a Machine Technician, you will be responsible for operating equipment and second-operation machines, performing inspections, trimming, testing, fixing, assembling, and packaging of products.Key Responsibilities:Operate...

  • Machine Operator

    2 days ago

    Charlotte, United States Kelly Services, Inc. Full time

    Kelly Services, Inc. - JobID: 3E837522F6CA49DC9F6F9611B42D05D4 [Production Operator / Machinist] As a Machine Operator at Kelly Services, Inc., you'll: Operate equipment and/or second operation machines through various tasks such as inspecting, trimming, testing, fixturing, assembling and packaging products; Safely lift large panes of glass with a partner...

  • Mauser Packaging- Maintenance Mechanic- Competitive Pay

    3 weeks ago

    Charlotte, United States Mauser Packaging Solutions Full time

    Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start-up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical...

  • Machine Operator/Laser Operator

    2 days ago

    Charlotte, United States Kelly Services, Inc. Full time

    Kelly Services, Inc. - JobID: EA352C04831D4A4FBF175FA6530FA263 [Production Operator / Machinist] As a Machine Operator at Kelly Services, Inc., you'll: Operate equipment and/or second operation machines through various tasks such as inspecting, trimming, testing, fixturing, assembling and packaging products; Safely lift large panes of glass with a partner...

  • Machine Operator

    4 months ago

    Charlotte, United States Shapeways Full time

    Job DescriptionJob DescriptionFounded in 2003 and acquired by Shapeways, Inc. in 2022, Linear AMS is a customer-focused, solutions-oriented partner for plastics mold tooling and production. These competencies and our full machine shop capabilities have allowed us to become an industry leader in the following areas: mold flow analysis, plastic injection mold...

  • Extrusion Machine Operator

    5 days ago

    Charlotte, North Carolina, United States Cornerstone Staffing Solutions Full time

    Job OverviewCornerstone Staffing Solutions is seeking a skilled Extrusion Machine Operator to join our team at our South Charlotte Manufacturing facility. As a key member of our production team, you will be responsible for packing, lifting, and pushing/pulling up to 60 pounds, as well as conducting quality checks and operating basic machinery.This is a great...

  • CNC Machine Operator

    3 months ago

    Charlotte, United States PWS International, Inc. Full time

    JOB DESCRIPTION PWS International is seeking skilled CNC Machinists with a minimum of 2 years of experience to join our Charlotte NC team. The ideal candidate should have a background in CNC machining with the ability to load, operate, time track, and ensure quality control of fabricated parts throughout daily production.WHAT YOU’LL...

  • CNC Machine Operator

    3 months ago

    Charlotte, United States PWS International, Inc. Full time

    JOB DESCRIPTION PWS International is seeking skilled CNC Machinists with a minimum of 2 years of experience to join our Charlotte NC team. The ideal candidate should have a background in CNC machining with the ability to load, operate, time track, and ensure quality control of fabricated parts throughout daily production.WHAT YOU’LL...

  • Machine Operator

    3 months ago

    Charlotte, United States Carolina Foods Inc. Full time

    Job DescriptionJob DescriptionDay and Night Shift available.Days: 5:00am to 5:00pmNights: 5:00p to 5:00amBasic Function: To ensure that all product is wrapped in the proper film, using proper codes.To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of...

  • Machine Operator

    4 weeks ago

    Charlotte, United States Cornerstone Staffing Solutions Full time $18 - $21

    Job DescriptionJob DescriptionWe are seeking a Machine Operator to join our team! You will help oversee operational activities and ensure excellent quality control. Schedule:Monday - Friday6:00 am - 2:30 pmPay Range:$18 - $21 per hourSalary review and benefits upon permanent hireBasic Essential Duties and ResponsibilitiesCore Values- Follows and reinforces...

  • Additive Manufacturing

    1 month ago

    Charlotte, United States King Machine Companies Full time

    Job DescriptionJob DescriptionDescription:Job Summary: The Additive Manufacturing Operator is responsible for operating advanced powder bed fusion (PBF) 3D printing machines to produce high-precision sipes for the tire industry. This hands-on, technical role requires programming machines, monitoring print jobs, and performing post-processing tasks to ensure...

  • Machine Operator

    4 weeks ago

    Charlotte, United States Transtech Energy Full time

    Job DescriptionJob DescriptionJob Title: Material Processor/Machine OperatorLocation: Charlotte, NCCompany Overview:Bendel Tank and Heat Exchanger, LLC, a division of TransTech Energy, LLC is a growing company servicing the Chemical and Industrial markets, with a footprint that covers the entire U.S. as well as Latin America and the Caribbean. To keep up...

  • Machine Operator

    6 days ago

    Charlotte, North Carolina, United States BARRDAY CORP Full time

    Job SummaryBarrday Corp is seeking a skilled Machine Operator to join our production team. As a key member of our manufacturing team, you will be responsible for safely and efficiently operating various production machines to consistently meet quality and output targets.Key ResponsibilitiesMachine Operation: Responsible for the startup, operation, clean up,...

  • Feeder Operator

    2 months ago

    Charlotte, North Carolina, United States Graphic Packaging International, Inc. Full time

    Maintain feeder operation, pallets of paper in feeder, and maintain ink levels in individual ink fountains. Assist in make ready and PM activities.Operate the Feeder; set up loads, set top and side guides, identify good and bad loads, hang plates on printing pressChallenge run speed throughout the shift and during each job changeEnsure that all daily...

  • Stamping Machine Operator

    2 weeks ago

    Charlotte, North Carolina, United States Express Employment Professionals Full time

    Job OverviewLocation: South Charlotte, NCHours: Full-Time, 40 hours/weekWork Schedule: 1st shift; Monday-Thursday 6:00am-4:30pmCompensation: Starting at $18.00-$20.00Position Summary:As a Stamping Machine Operator, you will be responsible for operating a stamping press machine. This role involves setting up the machine, which includes tasks such as...