Assembler III

2 weeks ago

Grove City, United States REV Group Inc Full time
Additional Locations:
Requisition ID: 22440
Since 1968 Horton Emergency Vehicles has built the industry's most innovative ambulances for first responders risking their lives to save others. Horton designs, manufactures, and delivers the highest-quality, most tailor-made ambulances the market has to offer.

Horton Emergency Vehicles is part of the larger REV Group (NYSE: REVG), a leading manufacturer of specialty vehicles for the fire & emergency and recreation markets. REV Group's extensive vehicle line-up includes models such as ambulances, fire trucks, terminal trucks, RV's and much more. Our 6,500+ employees continuously demonstrate their commitment to building innovative and reliable vehicles that our customers can depend on whether for a family trip across the U.S. or when responding to an emergency. Rev Group is a veteran friendly employer and hires over 200 veterans and or those transferring out of the military each year.

Primary Functions:

Installation of various vehicle interior/exterior parts according to specifications and using hand tools, power tools, and production fixtures.

Duties and Responsibilities:

  • Installation of all nonelectrical interior/exterior components and hardware.
  • Bolts, screws, clips, or otherwise fastens together parts to form subassemblies, such as doors, seats, instrument control panels, steering columns, and axle units.
  • Seals joints and seams, using caulking gun.
  • Fastens seats, door paneling, headliners, carpeting, molding, and other trim into position.
  • Assembles fabricated parts, components, or units at floor stations.
  • Positions parts and subassemblies by using templates or reading measurements.
  • Uses hand tools and power tools to assemble units according to product specifications.
The above list of responsibilities is not exhaustive, and you may be required to undertake other responsibilities and/or training as requested by your line manager.

Requirements (education, experience, travel, physical, work environment):
  • Ability to read and use linear and other measuring devices.
  • Ability to perform all operations within acceptable quality and time standards.
  • Fundamental use of various pneumatic and power tools such as: to drills, screw gun.
  • Must have general knowledge of OSHA and EPA standards.
  • Function with a minimal amount of supervision or no supervision.
  • Set work priorities to meet production goals as scheduled.
Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand; use hands to handle, or feel objects, tools or controls; and reach with hands and arms. The employee frequently is required to walk. The employee is occasionally required to stand, climb or balance, stoop, kneel, crouch, or crawl. Other physical requirements include:
  • Ability to regularly lift and/or move up to 40#'s without assistance.
  • Ability to work from various squatting, kneeling or bending positions.
  • Ability to work with arms above head.
  • Ability to work from ladders or scaffolding.
  • Ability to stand at a workstation for ten hours a day (minus specified breaks.)
  • Ability to perform all operations within acceptable quality and time standards.
  • Ability to safely use specified hand, air, power tools, and machinery.
  • Ability to operate and understand the operation of all protective safety equipment in the area.
  • Specific vision abilities required by this job include close vision, peripheral vision and depth perception.
  • Ability to handle and dispose of hazardous waste.
  • Ability to work in noisy and dusty conditions.
Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to fumes or airborne particles and vibration. The employee is occasionally exposed to toxic or caustic chemicals.
  • Ability to bend, stoop, and squat.
  • Occasionally lift up to but not exceed 40#'s.
  • Ability to work with arms above head.
  • Able to read and follow written and verbal instructions.
The noise level in the work environment is elevated.

Experience:
  • One year experience in a related manufacturing environment preferred
Personal Protective Equipment Recommended and/or Required:
  • Safety glasses
  • Earplugs
  • Closed toed shoes
  • Knee pads
  • Gloves


REV Group is committed to a policy of equal employment opportunity. The Company conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran's status, pregnancy, genetic information, sexual orientation, or any other basis prohibited by law. REV Group also undertakes affirmative action to assure equal employment opportunities for minorities and women, for persons with disabilities, and for protected veterans.

NOTICE FOR CALIFORNIA RESIDENTS

Effective January 1, 2020, pursuant to the California Consumer Privacy Act of 2018 (as amended, the "CCPA"), if you are a California resident, you may have certain additional rights. Please click on the link for a description of those rights and how California residents may exercise them.

  • Assembly Technician III

    4 weeks ago

    Grove City, Ohio, United States HALCORE GROUP, INC. Full time

    Job SummaryWe are seeking a skilled Assembly Technician III to join our team at HALCORE GROUP, INC. in the role of Assembly Technician III. As an Assembly Technician III, you will be responsible for installing various vehicle interior and exterior parts according to specifications and using hand tools, power tools, and production fixtures.Key...

  • Assembly Technician III

    4 weeks ago

    Grove City, Ohio, United States Horton Emergency Vehicles Full time

    Job Summary: Horton Emergency Vehicles is seeking a skilled Assembly Technician III to join our team. As a key member of our production team, you will be responsible for installing various vehicle interior/exterior parts according to specifications and using hand tools, power tools, and production fixtures. Key Responsibilities: Installation of all...

  • Assembly Technician III

    3 weeks ago

    Grove City, Ohio, United States HALCORE GROUP, INC. Full time

    Job Summary: We are seeking a skilled Assembly Technician III to join our team at HALCORE GROUP, INC. The successful candidate will be responsible for installing various vehicle interior and exterior parts according to specifications, using hand tools, power tools, and production fixtures.Key Responsibilities:* Install all non-electrical interior and...

  • Electromechanical Assembler III Position

    3 weeks ago

    Maryland City, Maryland, United States Antenna Research Associates Full time

    Electromechanical Assembler III Job OverviewAt Antenna Research Associates, we are seeking a highly skilled Electromechanical Assembler III to support new programs. The ideal candidate will have advanced skills in fine precision soldering, electronics testing and measuring devices, and troubleshooting complex assemblies.Key Responsibilities:Assemble and wire...

  • Flexible Assembler III

    4 months ago

    Michigan City, United States Dwyer Instruments Full time

    Flexible Assembler III The Flexible Assembler III located in our Global Headquarters reports to our Plant Supervisor and is responsible for accurately and expediently assembling and testing sub assembly level products and / or finished products. Essential Duties and Responsibilities: Perform assembly, calibration, and test operations in the manufacture of...

  • Assembler III

    2 weeks ago

    Grove City, United States HALCORE GROUP, INC. Full time

    Additional Locations: Requisition ID: 22440 Since 1968 Horton Emergency Vehicles has built the industry's most innovative ambulances for first responders risking their lives to save others. Horton designs, manufactures, and delivers the highest-quality, most tailor-made ambulances the market has to offer. Horton Emergency Vehicles is part of the larger REV...

  • Electromechanical Assembler

    4 weeks ago

    Garden Grove, California, United States Aerotek Full time

    Electromechanical Assembler Job DescriptionWe are seeking skilled Electromechanical Assemblers to join our team at Aerotek. As an Electromechanical Assembler, you will be responsible for assembling custom wire harnesses and cable assemblies for aerospace and defense applications.Key Responsibilities:Assemble custom wire harnesses and cable...

  • Electromechanical Assembler

    4 weeks ago

    Garden Grove, California, United States Aerotek Full time

    Electromechanical Assembler Job DescriptionJob Title: Electromechanical AssemblerJob Type: Contract-to-HireLocation: Garden Grove, CaliforniaJob Description:We are seeking an experienced Electromechanical Assembler to join our team in Garden Grove, California. As an Electromechanical Assembler, you will be responsible for assembling custom wire harnesses and...

  • Electromechanical Assembler

    4 weeks ago

    Garden Grove, California, United States Aerotek Full time

    Job DescriptionAerotek is seeking an Electro-Mechanical Assembler for our 2nd shift team. This is a contract-to-hire position with a duration of 4 months, located fully on-site in Garden Grove, California.Key Responsibilities:Assemble custom wire harnesses and cable assemblies.Participate in training programs to learn specific processes and achieve IPC-620...

  • Electro-Mechanical Assembler

    3 weeks ago

    Garden Grove, California, United States Aerotek Full time

    Job Description:We are seeking skilled Electro-Mechanical Assemblers for our 2nd shift team. As a key member of our team, you will be responsible for assembling custom wire harnesses and cable assemblies with high precision and accuracy.Key Responsibilities:Assemble custom wire harnesses and cable assembliesParticipate in training programs to learn specific...

  • Electromechanical Assembler

    3 weeks ago

    Garden Grove, California, United States Aerotek Full time

    Job Title: Electromechanical Assembler - 2nd Shift OpportunityJob Description:Aerotek is seeking an Electromechanical Assembler for our 2nd shift team. As an Electromechanical Assembler, you will be responsible for assembling custom wire harnesses and cable assemblies. This is a contract-to-hire position with a duration of 4 months, located fully on-site in...

  • Aviation Equipment Assembler

    3 weeks ago

    Kansas City, Missouri, United States PrimeFlight Aviation Services Full time

    Job DetailsDescriptionINTRODUCTIONAre you interested in a career with stability and growth opportunities in the aviation industry? We are seeking a skilled Assembler Class III to join our team at PrimeFlight Aviation Services.Perks of the Job 401(k) plan with company matching Comprehensive health insurance Dental insurance Life insurance Vision insurance...

  • Electro-Mechanical Assembler

    4 weeks ago

    Garden Grove, California, United States Aerotek Full time

    Job DescriptionElectro-Mechanical Assemblers are sought after for our 2nd shift team. This contract-to-hire position offers a unique opportunity to work with a leading manufacturer of custom wire harnesses and cable assemblies.Key Responsibilities:Assemble complex wire harnesses and cable assemblies.Participate in training programs to achieve IPC-620 class...

  • Electromechanical Assembler

    1 month ago

    Garden Grove, United States Aerotek Full time

    2nd Shift Assemblers Pay: $20.50/hr+ Job Description: Company Overview: We specialize in manufacturing custom wire harnesses and cable assemblies, ranging from simple to highly complex designs. We are committed to training individuals who demonstrate a positive attitude and a strong capacity for learning. Position Overview: We are seeking Electro-Mechanical...

  • Quality Assurance Specialist III

    4 weeks ago

    Union Grove, Wisconsin, United States Regal Rexnord Full time

    Job SummaryWe are seeking a highly skilled Quality Assurance Technician III to join our team at Regal Rexnord Corporation. As a Quality Assurance Technician III, you will play a critical role in ensuring the quality of our products and processes.Key ResponsibilitiesProvide quality support for assembly, shipping, and machining operations.Reduce external and...

  • 2nd Shift Assembler

    1 month ago

    Garden Grove, United States Aerotek Full time

    2nd Shift Assemblers Pay: $20.50/hr+ Job Description: Company Overview: We specialize in manufacturing custom wire harnesses and cable assemblies, ranging from simple to highly complex designs. We are committed to training individuals who demonstrate a positive attitude and a strong capacity for learning. Position Overview: We are seeking...

  • Electromechanical Assembler

    4 weeks ago

    Garden Grove, California, United States Aerotek Full time

    Job DescriptionElectromechanical Assemblers are sought after for a 2nd shift position at a leading manufacturer of custom wire harnesses and cable assemblies. This contract-to-hire opportunity offers a chance to gain valuable experience in a supportive and growth-oriented environment.Key Responsibilities:Assemble custom wire harnesses and cable...

  • Electromechanical Assembler

    1 month ago

    Garden Grove, United States Aerotek Full time

    Job DescriptionJob Description2nd Shift Electromechanical AssemblerPay: $20.50+Job Description2nd shift Electro-Mechanical AssemblersThe Company manufactures custom wire harnesses and cable assemblies, ranging from the simple to the extremely complex.***Will train people with great attitudes and capacity for learning.***No lifting requirements.The company...

  • Electro-Mechanical Assembler

    4 weeks ago

    Garden Grove, California, United States Aerotek Full time

    Job DescriptionWe are seeking an Electro-Mechanical Assembler to join our team on 2nd shift. This is a contract-to-hire position with a duration of 4 months, located fully on-site in Garden Grove, California.Key Responsibilities:Assemble custom wire harnesses and cable assemblies.Participate in training programs to learn specific processes and achieve...

  • Electromechanical Assembler

    1 month ago

    Garden Grove, United States Aerotek Full time

    Job DescriptionJob Description2nd Shift AssemblersPay: $20.50/hr+Job Description: Company Overview: We specialize in manufacturing custom wire harnesses and cable assemblies, ranging from simple to highly complex designs. We are committed to training individuals who demonstrate a positive attitude and a strong capacity for learning.Position Overview: We...