Communication and Controls Engineer
3 weeks ago
Job DescriptionJob Description
This position is responsible for the initial design, installation, testing and maintenance of the communication and SCADA control systems that monitor, control, and protect the capital investment that has been made in the CLIENT gas and electric transmission, distribution, and hydroelectric generation and lake level control infrastructure. Performs communication and SCADA system troubleshooting and problem correction. Works with other Gas and Electric departments to coordinate outages, design, build and commissioning new substations, communications systems, and energy management control systems. Work Schedule can include extended hours or overnight stays out of the area. Personnel are subject to 24/7 emergency callout.
Principles Duties and Responsibilities
- Originates and/or reviews project design drawings and verifies field wiring to insure strict adherence to proper communication and control practices and CLIENT standards.
- Provides engineering support on site and directs various operating and construction personnel to insure that all communication and SCADA equipment is installed, tested and operates properly.
- Performs acceptance, calibration, functional testing and final operational checks of communication and SCADA equipment for new substations or renovation projects.
- Performs final acceptance and functional testing of all Distribution Automation circuits, sequences, Load Transfer, Dead Bus Transfer, and Auto Restoration routines.
- Performs RTU to EMS/DMS/ Hydro control system checks for analog, status, and SCADA control points. These tests check integrity of the databases, screen links to different system displays, and analog slope checking.
- Performs final field acceptance testing of new communication and SCADA equipment (radios and MUX channels, tower lighting equipment, antenna systems, battery systems, RTUs, distribution automation switches, power line carriers, line relaying equipment and other associated equipment).
- Performs scheduled inspection and functional test maintenance of communications and line relaying equipment to insure continued reliability.
- Maintains, calibrates, backs up, and repairs system monitoring equipment (microwave alarm system, microwave level monitoring system) located at the Electric Dispatch Control Center.
- Responds anytime, day or night, to investigate and provide solutions to field or control center problems with communication and SCADA control design or equipment problems.
- Provides technical assistance and engineering services to various departments within the company and to industrial and commercial customers for revenue generation.
- Conducts communication frequency interference testing for various groups within the company.
- Documents all equipment test data and maintains the most current version of substation communication and SCADA prints.
- Keep microwave station logs and verify that equipment operation complies with FCC rules and regulations.
- Designs microwave and SCADA communication schematic diagrams for new systems.
- Originates ground designs for microwave stations. Provides the field-testing of the recommended installation to insure adherence to design parameters.
- Provides training and assistance for various departments inside the corporation.
Qualifications
- Bachelor of Science in Engineering, Engineering Technology (EE, ME, MET or EET) OR Computer Engineering.
- Understanding of basic engineering/technical theories and principles.
- Understanding of basic practices of researching technical design issues, evaluating alternatives, making sound recommendations and preparing and presenting recommendations
- Ability to deal with a variety of individuals from various socio-economic, cultural and ethnic backgrounds.
- Good written and oral communication skills
- Ability to perform duties under close supervision
-
Communication and Controls Engineer
1 month ago
Crown Point, United States Alliance Group Technologies Full timeJob DescriptionJob Description This position is responsible for the initial design, installation, testing and maintenance of the communication and SCADA control systems that monitor, control, and protect the capital investment that has been made in the CLIENT gas and electric transmission, distribution, and hydroelectric generation and lake level control...
-
Project Engineer
4 weeks ago
Crown Point, United States Alliance Group Technologies Full timeJob DescriptionJob DescriptionRequired Qualifications for Position• Bachelor’s degree in Engineering or Engineering Technology from an accredited university or college• Minimum 5 years’ experience in one or more of the following: engineering experience in a utility-based environment, project management• Must have the ability to lead and function in...
-
Controls Engineer
2 days ago
High Point, United States Air Power Full timeJob Description Job Description Job Description: Controls Engineer Position Summary: The controls engineer designs, develops and implements control systems and automated solutions for industrial processes. They will be expected to design systems from scratch that integrate sophisticated technologies such as plural component fluid mix systems, intelligent...
-
Controls Engineer
2 days ago
High Point, United States Air Power Inc. Full timeJob DescriptionJob DescriptionJob Description: Controls EngineerPosition Summary:The controls engineer designs, develops and implements control systems and automated solutions for industrial processes. They will be expected to design systems from scratch that integrate sophisticated technologies such as plural component fluid mix systems, intelligent...
-
Controls Engineer
2 days ago
High Point, United States Talent Consulting Experts Full timeJob Description Job Description Join our Innovative Team Become a part of a team known for cutting-edge solutions and a strong international presence. We are committed to enhancing our manufacturing processes through advanced control engineering techniques, maximizing production efficiency and cost-effectiveness. As an experienced Control Engineer, you will...
-
Controls Engineer
6 days ago
High Point, United States Talent Consulting Experts Full timeJob DescriptionJob DescriptionJoin our Innovative TeamBecome a part of a team known for cutting-edge solutions and a strong international presence. We are committed to enhancing our manufacturing processes through advanced control engineering techniques, maximizing production efficiency and cost-effectiveness.As an experienced Control Engineer, you will...
-
Controls Engineer
5 days ago
High Point, United States Talent Consulting Experts Full timeJoin our Innovative TeamBecome a part of a team known for cutting-edge solutions and a strong international presence. We are committed to enhancing our manufacturing processes through advanced control engineering techniques, maximizing production efficiency and cost-effectiveness.As an experienced Control Engineer, you will provide comprehensive controls...
-
Quality Control Technician
23 hours ago
Crown Point, United States Ozinga Bros., Inc. Full timeOverviewSummary:The Quality Control Technician will implement and comply with quality assurance methods and procedures to ensure products and materials are produced in accordance with specifications in a safe and efficient manner.Principal Duties and Responsibilities:Quality Control Analysis:Conduct tests and inspect concrete to evaluate quality or...
-
Process Controls/Automation Engineer
2 days ago
Stevens Point, United States The Stellar Group Full timeJob Description Job Description Responsible for PLC and HMI application development, system architecture concept and design, network design, instrumentation specification and selection, control panel design and acceptance testing, system commissioning and start-up for food processing and packing equipment / systems. In addition, the automation engineer is...
-
Security & Fire Systems Designer
18 hours ago
High Point, United States Johnson Controls Full timeWhat you will doUnder direct supervision and using established standards, responsible for hardware designs and software programming for Security & Fire systems to meet the intent of the project requirements. Provides detailed information and submittals to communicate design and operation to customers, consultants, Johnson Controls field installation team and...
-
Crown Point, United States AtWork Group Full timeThis field based position is an integral part of our commitment to the quality and service we provide for our customers and to their equipment. The work is varied from day to day and is ideally suited to a self-motivated individual who can work independently. A successful inspector will have excellent communications skills and the ability to work with...
-
Loss Control Authorized Pressure Vessel Inspector
18 hours ago
Crown Point, United States AtWork Group Full timeThis field based position is an integral part of our commitment to the quality and service we provide for our customers and to their equipment. The work is varied from day to day and is ideally suited to a self-motivated individual who can work independently. A successful inspector will have excellent communications skills and the ability to work with...
-
Security & Fire Systems Designer
2 days ago
High Point, United States Johnson Controls Full timeWhat you will do Under direct supervision and using established standards, responsible for hardware designs and software programming for Security & Fire systems to meet the intent of the project requirements. Provides detailed information and submittals to communicate design and operation to customers, consultants, Johnson Controls field installation team...
-
Automation Controls Engineer
1 week ago
West Point, United States AA2IT Full timeJob Description Job Description Need someone who is pro-active, troubleshoot Experience | Skills | Knowledge Required • 3+ years in process automation or equivalent in pharmaceutical/ biotechnology industry. • Familiarly with Computer system validation and regulatory GXP requirements. • Knowledgeable of S88 Batch Standard • Strong communication and...
-
Autonomous Control Systems Design Engineer
3 weeks ago
Summit Point, United States Applied Research Associates Full timeDescription The Capital Area Division (CAD) of Applied Research Associates, Inc. (ARA) is seeking a motivated, action-oriented Autonomous Control Systems Design Engineer to support research and development program involving development of autonomous systems to support Department of Defense (DoD) operations. This engineer will be working in a...
-
Autonomous Control Systems Design Engineer
1 month ago
Summit Point, United States ARA Full timeThe Capital Area Division (CAD) of Applied Research Associates, Inc. (ARA) is seeking a motivated, action-oriented Autonomous Control Systems Design Engineer to support research and development program involving development of autonomous systems to support Department of Defense (DoD) operations. This engineer will be working in a multi-disciplinary team...
-
Automation Controls Engineer
2 weeks ago
West Point, United States AA2IT Full timeJob DescriptionJob DescriptionNeed someone who is pro-active, troubleshootExperience | Skills | Knowledge Required• 3+ years in process automation or equivalent in pharmaceutical/ biotechnology industry.• Familiarly with Computer system validation and regulatory GXP requirements.• Knowledgeable of S88 Batch Standard• Strong communication and...
-
Controls Engineer
2 weeks ago
High Point, United States Talent Consulting Experts Full timeJob DescriptionJob DescriptionJoin our team known for our cutting-edge and innovative solutions with a strong international presence. We are committed to enhancing our manufacturing processes through advanced control engineering techniques to maximize production efficiency and cost-effectiveness.As an experienced Control Engineer, you will provide a...
-
Control Engineer
2 weeks ago
West Point, United States Yokohama Tire Full timeSummary: POSITION PURPOSE: To develop, modify and troubleshoot machine PLC controls and processes to improve production efficiency, reduce waste, and reliability. Work with various phases of automated control projects such as: design, estimating, soliciting quotes, negotiating contracts, developing schedules and budgets, implementing, modifying, and...
-
Controls Engineer
4 weeks ago
Commercial Point, United States CareerBuilder Full timeJob Description Job Description Conducts preventive maintenance, repair, install, commission and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of technical competence, works closely with other control...