Assembly Worker Structures Sr

4 months ago

Marietta, United States Lockheed Martin Corporation Full time

Description:Lays out and locates structural components or assemblies in making production assemblies as specified by design changes, working from blueprints or other authorized documents. Performs difficult structural pick-up and/or rework such as removing, replacing or realigning ribs, bulkheads, stringers, or fittings in completed skinned assemblies, or where a considerable portion of the operation consists of reforming, recontouring or refitting to provide an acceptable assembly. Works structural changes which materially alter previous assembly references and practice. Performs trimming, reforming and altering parts and structures as required. Fabricates detail parts such as shims, splices, gussets, angles, brackets, doublers, stiffeners and patches. Performs portable milling operations on wing and center section attaching joints. Must be able to layout and secure coordination of assemblies working to station, water, center, butt, and chord lines shown on engineering documents.
When required, works from blueprints or other authorized documents where complete information is not readily available and/or with inadequate tooling, or without aid of tooling. Works from production, pre- release, check, detail, assembly and installation blueprints, D.A.T.'s sketches or other authorized documents.
Lays out and locates structural components or assemblies in making production installations as specified by design changes, working from blueprints or other authorized documents. Performs such final assembly operations as pick-up and rework on structures and installations, installing shortages, and bringing up all items to latest engineering changes. In addition, makes corrections of a mechanical nature on plumbing, electrical, controls, and power plant installations. Operates controls for free operation and makes corrective adjustments short of operational check-out. Operates landing gear, up locks and down locks, to check for clearance. Completes installation of and fits such items as landing gear doors, flaps, etc. Fits or refits fillets; lays out and installs fillets as required. Fabricates structural items such as clips, brackets, angles, gussets, supports, etc., required.

Improvises shop aids to facilitate assembly and installation as required. Works off sub-assembly and final assembly squawks as required. Must be able to layout and secure coordination of assemblies working to station, water, butt, center and chord lines, shown on engineering documents.
When required, works from blueprints or other authorized documents where complete information is not readily available and/or with inadequate tooling, or without the aid of tooling. Works from production, pre-release, check, detail, assembly and installation blueprints, photographs, charts and diagrams, D.A.T.'s, sketches or other authorized documents.
Works with authorized liaison personnel as necessary to determine satisfactory assembly and installation sequence. Points out need for tooling, parts, or assembly corrections.
May install power plants and propellers when so assigned.
Refers to assembly prints, sketches, specification sheets, planning and other authorized documents to ascertain size, type, and location of rivets and detail components to be assembled. Sets up rivet machine by selecting and installing proper combination drill-countersink or punch-dimple sets and upper and lower anvils in operating head and bottom post. Selects, installs and fills proper size rivet hoppers.
Lays out rivet patterns to scale as required. Recognizes and notifies designated personnel of improper machine functioning. Installs heater blocks and sets specified temperature and dwell time when performing punch-hot dimple-riveting. Performs rework such as drilling out and replacing defective rivets. Performs satisfactorily any function of the Structures Assembler classification as required.

NOTE: Up to six months of experience may be offset by experience in the following areas:
A&P licensed mechanic

GAhourly
Basic Qualifications:
Note to hourly employees at Aeronautics, Marietta: You are not eligible to apply via the LMCareers talent gateway for any positions that are included in your current bargaining unit (union).

Minimum Four years of experience as an Aircraft Structural Assembly Worker.

This classification is multi-skilled and these employees may be assigned to do only one element of these skills such as structures installation/assembly only rather than electrical, hydraulic/plumbing, and/or controls installation/assembly. Therefore, to meet the above requirement an employee review must indicate satisfactory performance in structures assembly as well as hydraulic/plumbing, and/or controls.

An employee may be required to work under pressurized conditions or in confined areas which require clearance of any applicable medical limitations on weight lifting, body movement or pressurization effects. Pressurizer certification will also be required.

At the start of employment, you will be required to attend a skills training program, and take and pass a performance demonstration test following completion.
Desired Skills:
Aerospace and Defense structural assembly experience

A&P license
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.

As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Hourly/Non-Exempt
Business Unit: AERONAUTICS COMPANY
Relocation Available: Yes
Career Area: Manufacturing
Type: Full-Time
Shift: First

  • Aircraft Structural Assembly Worker

    16 hours ago

    Marietta, Georgia, United States Lockheed Martin Corporation Full time

    Aircraft Structural Assembly WorkerLockheed Martin is seeking an experienced Aircraft Structural Assembly Worker to join our team. In this role, you will be responsible for laying out and locating structural components or assemblies in making production installations as specified by design changes, working from blueprints or other authorized documents.Key...

  • Aircraft Structural Assembly Worker

    2 weeks ago

    Marietta, Georgia, United States Lockheed Martin Corporation Full time

    Aircraft Structural Assembly WorkerLockheed Martin Corporation is seeking a skilled Aircraft Structural Assembly Worker to join our team. As a key member of our assembly team, you will be responsible for assembling and installing structural components on aircraft.Key Responsibilities:Assemble and install structural components on aircraftWork with a variety...

  • Aircraft Structural Assembly Specialist

    4 weeks ago

    Marietta, Georgia, United States Lockheed Martin Corporation Full time

    Job SummaryWe are seeking a skilled Aircraft Structural Assembly Specialist to join our team at Lockheed Martin Corporation. As a key member of our assembly team, you will be responsible for laying out and locating structural components or assemblies in making production installations as specified by design changes, working from blueprints or other...

  • Aircraft Structural Assembly Specialist

    3 weeks ago

    Marietta, Georgia, United States Lockheed Martin Corporation Full time

    Job SummaryLay out and locate structural components or assemblies in making production installations as specified by design changes, working from blueprints or other authorized documents. Perform such final assembly operations as pick-up and rework on structures and installations, installing shortages, and bringing up all items to latest engineering changes....

  • Structural Assembly Technician

    3 weeks ago

    Marietta, Georgia, United States Lockheed Martin Corporation Full time

    Job SummaryWe are seeking a skilled Structural Assembly Technician to join our team at Lockheed Martin Corporation. As a key member of our assembly and installation team, you will be responsible for laying out and locating structural components or assemblies in making production installations as specified by design changes, working from blueprints or other...

  • Production Worker

    4 weeks ago

    Marietta, United States PrideStaff Full time

    Warehouse Worker - Assembly. Shift/ Hours: Monday - Thursday - 8:00 am - 5:00 pm, Friday - 8:00 am - 4:00 pm. Pay Rate: $18/hour. Location: Marietta, GA - Experience: Production/ Assembly We have an exciting opportunity for a Warehouse Worker - As Production Worker, Assembly, Warehouse Worker, Production, Worker, Manufacturing, Staffing

  • Structural Analysis Engineer

    4 days ago

    Marietta, Georgia, United States Butler America Aerospace LLC Full time

    Job Title: Structural Analysis EngineerWe are seeking a highly skilled Structural Analysis Engineer to join our team at Butler America Aerospace, LLC.Job Summary:The successful candidate will be responsible for performing structural analysis on new designs of primary and secondary airframe structure, establishing structural specifications, and using...

  • Assembly Line Worker

    4 days ago

    Marietta, Georgia, United States Builders FirstSource Full time

    Assembler - Exterior Door ProductionAt Builders FirstSource, we're seeking a skilled Assembler to join our team in Exterior Door Production. As an Assembler, you'll play a crucial role in producing high-quality building material components and millwork products.Key Responsibilities:Perform repetitive tasks on an assembly or sub-assembly line to produce...

  • Production Assembler

    2 weeks ago

    Marietta, Georgia, United States Lockheed Martin Corporation Full time

    Job SummaryWe are seeking a skilled Production Assembler to join our team at Lockheed Martin Corporation. As a Production Assembler, you will be responsible for assembling and installing structural and mechanical components on aircraft.Key ResponsibilitiesAssemble and install structural and mechanical components on aircraftWork from production, pre-release,...

  • Production Assembler

    2 weeks ago

    Marietta, Georgia, United States Lockheed Martin Corporation Full time

    Job SummaryThis role involves assembling fabricated and purchased parts into detail structural and mechanical assemblies at bench and floor positions. The successful candidate will work from production, pre-release, check, detail, assembly, and installation blueprints, photographs, development assist, and master layout tooling, sketches, and other authorized...

  • Production Assembler

    4 days ago

    Marietta, Georgia, United States Lockheed Martin Corporation Full time

    Job SummaryThis is a production assembler position that requires the assembling of fabricated and purchased parts into detail structural and mechanical assemblies at bench and floor positions where detailed production information and established tooling are provided.Key ResponsibilitiesAssemble parts into detail assemblies where all locating information is...

  • Aircraft Assembly Technician

    4 weeks ago

    Marietta, Georgia, United States Lockheed Martin Corporation Full time

    Job SummaryWe are seeking a skilled Aircraft Assembly Technician to join our team at Lockheed Martin Corporation. As a key member of our assembly team, you will be responsible for building and installing aircraft structures, components, and systems.Key ResponsibilitiesAssemble and install aircraft structures, components, and systems according to technical...

  • Structural Analyst

    4 weeks ago

    Marietta, Georgia, United States Cenergy International Full time

    Job Title: Structural Analyst - Stress and DynamicsWe are seeking a highly skilled Structural Analyst to join our team at Cenergy International. As a Structural Analyst, you will be responsible for performing structural analysis on new designs of primary and secondary airframe structure.Key Responsibilities:Establish structural specifications and perform...

  • Structural Analyst

    1 month ago

    Marietta, Georgia, United States Cenergy International Full time

    Job Title: Structural Analyst - Stress and DynamicsWe are seeking a highly skilled Structural Analyst to join our team at Cenergy International. As a key member of our engineering team, you will be responsible for performing structural analysis on new designs of primary and secondary airframe structure.Key Responsibilities:Establish structural specifications...

  • Structural Engineer

    3 days ago

    Marietta, Georgia, United States Selectek Full time

    Job Title: Entry-Level Structural EngineerJob Summary: Selectek is partnering with a company in Marietta, Georgia to find junior Structural Engineers to join their team.Job Requirements:Bachelor's degree in Structural or Civil Engineering.Knowledge of AutoCAD and Inventor systems.Between 15 years of experience with industrial equipment preferred, but recent...

  • Structural Engineer

    3 weeks ago

    Marietta, Georgia, United States Selectek Full time

    Job Title: Structural Engineer - Material Handling SystemsSelectek is partnering with a company in Marietta, Georgia to find a Structural Engineer to join their team. The ideal candidate will have a strong background in material handling systems and conveyor design.Job Requirements:Bachelor's degree in Structural or Civil EngineeringKnowledge of AutoCAD and...

  • Structural Engineer

    4 days ago

    Marietta, Georgia, United States Selectek Full time

    Structural Engineer Job DescriptionSelectek is partnering with a company in Marietta, Georgia to find a junior Structural Engineer to join their team.This firm specializes in material handling and conveyor systems for large-scale industrial projects, requiring candidates to have an interest or experience in this field.Job RequirementsBachelor's degree in...

  • Structural Engineer

    4 days ago

    Marietta, Georgia, United States Selectek Full time

    Job Title: Structural Engineer - Material Handling SystemsJob Summary:Selectek is partnering with a company near Marietta, Georgia to find junior Structural Engineers to join their team. The ideal candidate will have a strong background in structural engineering and experience with material handling systems.Responsibilities:Work on projects for materials...

  • Production Worker

    3 weeks ago

    Marietta, United States Adecco Full time

    Job DescriptionJob DescriptionAdecco is hiring immediately for Production Workers in Marietta, OH. While working as a Production Worker for Adecco, you will earn 15.00/hour + other great benefits! In this role, you will complete assembly processes to finish units in a specified sequence and ensure that completed units meet specified quality standards before...

  • Electrical Engineer Sr

    4 days ago

    Marietta, Georgia, United States Lockheed Martin Corporation Full time

    Job DescriptionLockheed Martin is seeking an experienced Electrical Engineer Sr to join our team in Marietta, GA. As a key member of our team, you will provide technical assistance to the AMMM Harness Design Team in the development and production of the wiring design for all C-130, C-5, and P3 aircraft variants.Key Responsibilities:Design and fabricate...