Electromagnetic Environmental Effects
4 weeks ago
Location: Grand Prairie, TX
Job ID: #69074
Pay Range: $60-72
Seeking an Electromagnetic Environmental Effects (E3) Engineer with Electromagnetic Compatibility and Interference (EMC/EMI) hands on test & execution experience to support IAMD LOB.
Candidates need to be local to the Grand Prairie, TX site as this position will require the contractor to be onsite 50% of the time of contract assignment.
•Support test planning coordination between lab and program staffing
•Support test fixture designs for EMC test events
•Lead the setup and execution of EMC test events in accordance with the MIL-STD-461/464 test standards
•Document, compile, and analysis test event data to ensure design meets requirements
•Provide tight feedback to design team based on test events
•Develop and shape program requirements based on E3 design guidelines and best practices
•Work in a multi-disciplined team of electrical, electro-mechanical, and mechanical engineers
Required Experience:
•Minimum 5 years of E3/EMI/EMC testing experience
•Experience with conducting test events for MIL-STD-461 and/or MIL-STD-464
•Knowledge of electrical safety and military EMC compliance standards, requirements, and test methods
•Experience performing testing according to RTCA-DO-160 Sections 18-22
•Experience with vulnerability characterization
•Work experience in an ISO/IEC 17025 accredited laboratory
•Able to assist with basic troubleshooting, basic interpretation, and analysis of test results
•Proficiency in TILETM (ETS Lindgren EMC automation software) equipment scripts
•Preparation of test plans/procedures and reports
•Experience with typical lab test equipment, such as spectrum analyzers, EMI receivers, network analyzers, signal generators, power meters, RF directional couplers, Oscilloscopes, AC/DC power supplies, and RF amplifiers.
•Knowledge of E3 effects on military vehicles, fire control systems, missile systems, and munitions, including grounding, bonding, and shielding methods, designs to minimize radiated emissions and susceptibility, HIRF, HERO, and lightning effects, electromagnetic field coupling
•Active Secret Clearance is preferred. Ability to Obtain Secret Clearance. Not needed to start.
Desired:
•BSEE with a minimum of 5 years of E3 development experience
•Familiar with ESD handling and prevention protocols
•Experience developing EMI/EMC requirements, requirement flow down to subsystems, E3 control plans, design for E3 requirements, and hardware allocation planning
•E3 design experience with backgrounds in electromagnetic theory, modeling, and practical design support
•Perform quantitative E3 analysis
Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law
Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located. Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
-
Electromagnetic Environmental Effects
2 weeks ago
Grand Prairie, Texas, United States Butler America Full timeElectromagnetic Environmental Effects (E3)Engineer Location: Grand Prairie, TX Job ID: Pay Range: $60-72 Seeking an Electromagnetic Environmental Effects (E3) Engineer with Electromagnetic Compatibility and Interference (EMC/EMI) hands on test & execution experience to support IAMD LOB. Candidates need to be local to the Grand Prairie, TX site as this...
-
Electromagnetic Environmental Effects
3 weeks ago
Grand Prairie, United States Butler America Full timeElectromagnetic Environmental Effects (E3) Engineer Location: Grand Prairie, TX Job ID: #69074 Pay Range: $60-72 Seeking an Electromagnetic Environmental Effects (E3) Engineer with Electromagnetic Compatibility and Interference (EMC/EMI) hands on test & execution experience to support IAMD LOB. Candidates need to be local to the Grand Prairie, TX site...
-
Electromagnetic Environmental Effects Engineer
3 weeks ago
Grand Prairie, United States GeoLogics Full timeRole: Electromagnetic Environmental Effects EngineerClient: DOD-AerospaceLocation: Grand Prairie, TX (Hybrid)Duration: 1-year contract Hourly Rate: $60-70/hr (W2, non-benefited)You must be a US Citizen to apply. Position Description: Coordinate test planning between lab and program staff. Design test fixtures for EMC test events. Lead the setup and...
-
E3 Engineer
4 weeks ago
Grand Prairie, United States Butler Aerospace and Defense Full timeE3 Engineer / Electromagnetic Environmental Effects (BS+8yrs) Location: Grand Prairie, TX (75051)Job ID: #69217Pay Range: $75 - $88 Education: BSEE or MSEEMust be local to DFW area Work with one of the Largest American Owned Aerospace & Defense Companies.Seeking an E3 Engineer / E3 Engineer / Electromagnetic Environmental Effects Engineer (BS+8yrs) with...
-
E3 Engineer
4 weeks ago
Grand Prairie, United States Butler America Full timeE3 Engineer / Electromagnetic Environmental Effects (BS+8yrs) Location: Grand Prairie, TX (75051) Job ID: #69217 Pay Range: $75 - $88 Education: BSEE or MSEE Must be local to DFW area, a Hybrid schedule is possible US Citizenship required Work with one of the Largest American Owned Aerospace & Defense Companies. SUMMARY Seeking an E3 Engineer / E3...
-
E3 Engineer
4 weeks ago
Grand Prairie, United States Butler America Full timeE3 Engineer / Electromagnetic Environmental Effects (BS+8yrs)Location: Grand Prairie, TX (75051)Job ID: #69217Pay Range: $75 - $88 Education: BSEE or MSEEMust be local to DFW area, a Hybrid schedule is possible US Citizenship requiredWork with one of the Largest American Owned Aerospace & Defense Companies. SUMMARY Seeking an E3 Engineer / E3 Engineer /...
-
Electromagnetic Engineer
4 weeks ago
Grand Prairie, United States Belcan Full timeElectromagnetic Engineer Job Number: 347502 Category: Electrical / Electronics Description: Job Title: Electromagnetic Engineer Location: Grand Prairie, TX Zip Code: 75051 Start Date: Right Away Job Type: Contract Pay Rate: Up to $72.40/hr DoE Schedule: Hybrid Keywords: #ElectromagneticEnvironmentalEffectsEngineer #ElectricalEngineeringJobs Must...
-
Electrical Engineer
4 weeks ago
Grand Prairie, United States NESCO Inc Full timeClient is seeking an Electromagnetic Environmental Effects (E3) Engineer with Electromagnetic Compatibility and Interference (EMC/EMI) hands on test & execution experience to support IAMD LOB. Candidates need to be local to the Grand Prairie, TX site as this position will require the contractor to be onsite 50% of the time of contract assignment. " Support...
-
E3 Engineer
4 weeks ago
Grand Prairie, United States ICONMA Full timeWe are looking for an Electromagnetic Environmental Effects (E3) Engineer with EMC/EMI hands on test and execution experience. Support test planning coordination between lab and program staffing Support test fixture designs for EMC test events Lead the setup and execution of EMC test events in accordance with the MIL-STD-461/464 test standards Document,...
-
E3 Engineer
4 weeks ago
Grand Prairie, United States ICONMA Full timeWe are looking for an Electromagnetic Environmental Effects (E3) Engineer with EMC/EMI hands on test and execution experience. Support test planning coordination between lab and program staffing Support test fixture designs for EMC test events Lead the setup and execution of EMC test events in accordance with the MIL-STD-461/464 test...
-
Electrical Engineer
2 weeks ago
Grand Prairie, Texas, United States Apollo Professional Solutions Full timeJob DescriptionPosition Type:Electrical Engineer Location:Grand Prairie, TX Hourly rate: $72.40 Contractor benefits: Medical, vision, Dental, 401k Job Description: LM MFC is seeking an Electromagnetic Environmental Effects (E3)Engineer with Electromagnetic Compatibility and Interference (EMC/EMI) hands on test & execution experience to support IAMD LOB....
-
E3 Engineer
2 weeks ago
Grand Prairie, United States PGS Worldwide Full timePGS Worldwide is actively seeking a skilled E3 Engineer to support ongoing projects for an Aerospace leader in Grand Prairie, TX. This is an initial 12-month contract-to-hire opportunity and I will respond immediately to all qualified candidates. Job Description: An Aerospace leader is seeking an Electromagnetic Environmental Effects (E3) Engineer with...
-
Electrical Engineer
4 weeks ago
Grand Prairie, United States Softworld, a Kelly Company Full timeJob Title: Electrical Engineer - E3 AnalysisJob Location: Grand Prairie TX 75050Onsite Requirements: EMC/EMI E3 Development BSEE/MSEEJob Description:Seeking an E3 Engineer with Electromagnetic Compatibility and Interference (EMC/EMI) test experience to support multiple LOBs, including IAMD, AP/IAMD-AP, and TM: Design products to survive electromagnetic...
-
Electrical Engineer
4 weeks ago
Grand Prairie, United States Softworld, a Kelly Company Full timeJob Title: Electrical Engineer - E3 AnalysisJob Location: Grand Prairie TX 75050Onsite Requirements: EMC/EMI E3 Development BSEE/MSEEJob Description:Seeking an E3 Engineer with Electromagnetic Compatibility and Interference (EMC/EMI) test experience to support multiple LOBs, including IAMD, AP/IAMD-AP, and TM: Design products to survive electromagnetic...
-
Electrical Engineer
4 weeks ago
Grand Prairie, United States Softworld, a Kelly Company Full timeJob Title: Electrical Engineer - E3 AnalysisJob Location: Grand Prairie TX 75050Onsite Requirements: EMC/EMI E3 Development BSEE/MSEEJob Description:Seeking an E3 Engineer with Electromagnetic Compatibility and Interference (EMC/EMI) test experience to support multiple LOBs, including IAMD, AP/IAMD-AP, and TM: Design products to survive electromagnetic...
-
Electrical Engineer
4 weeks ago
Grand Prairie, United States Donatech Full timePosition would require the candidate to be a W2 employee of Donatech. US Citizenship Required. • Support test planning coordination between lab and program staffing • Support test fixture designs for EMC test events • Lead the setup and execution of EMC test events in accordance with the MIL-STD-461/464 test standards • Document, compile, and...
-
Environmental Technician- Entry level_
3 days ago
Grand Prairie, United States Republic Services Full time**ABOUT THE COMPANY** Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping...
-
Environmental Technician- Entry level
4 days ago
Grand Prairie, United States Republic Services Full timeABOUT THE COMPANY Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping...
-
Electrical Engineer
4 weeks ago
Grand Prairie, United States The Staffing Resource Group Inc Full timeElectrical Engineer Salary: Up to $72.40/hr. Location: Grand Prairie, TX (50% hybrid) Industry: Government/Defense Employment Type: Long-term contract with the potential for permanent hire Clearance: Ability to Obtain SecretShift: 1st Shift, Monday - Thursday = 3 day weekend! Qualifications: Bachelor s degree or higher in Electrical Engineering or related...
-
Environmental, Health
4 weeks ago
Eden Prairie, Minnesota, United States Phillips & Temro Industries Full timeRESPONSIBIITIES AND DUTIES:Leads the development and effective implementation of PTI Safety Policies and practices. Reviews and updates all safety policies annually.Reduces injuries by engaging all employees in safety programs. Coordinates internal and external resources to ensure all employees are properly trained and comply with policies and programs....