CNC Programmer/Machinist

2 weeks ago

Chandler, United States UCT Alumni Association Full time

Join UCT and be part of the fastest-growing sector in the world We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success - join us todayUCT is looking for a talented CNC Programmer/Machinist to join us in Chandler, ArizonaJob SummaryPosition is responsible for programming and updating programs for the CNC Milling Department, may also help or support personal setting up jobs and machining parts.Essential Duties and Responsibilities:Must be able to read prints, perform complex dimensional calculations and understand and be able to read geometric dimensioning and tolerances.Can determine tool wear and perform tool changes as well as calculate tool offsets.Typically has to maintain dimensional tolerances less than or equal to +/- .001. Must be able to use all standard measurement tools to determine part quality. Must be able to calculate slopes and angles and perform complex inspection setups.Performs simple setups with assistance for jobs with single or multiple operations having tolerances greater than +/- .001. Operator will load, unload, and inspect parts. Operator will maintain accurate part counts, update router paperwork, segregate parts as required and fill out SPC documentation. Operator will be responsible for quality of the parts being produced and for achieving production standards.Position will require de-burring and polishing parts at the machine on some work. Operator to report any equipment problems. Must understand and follow documented operator and set-up procedures.Responsible for machine and area housekeeping including cleaning the machine, removing chips from the machine, moving material and parts as necessary.Standards for efficiency should exceed 100%.Scrap rates should be under 1%. Can, without supervision during a work period setup job with parts made from aluminum, stainless steel, and other exotic materials.(Parts are highly complex and can include many angled, surfaces, pockets, steps tapers and related features on different planes. Parts will usually require more than one operation and loading schemes will be very complex.) Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.Knowledge, Skills and Abilities: Ability to read and understand drawings including geometric dimensioning and tolerancesUse of precision measurement toolsAble to maintain accurate part countsKnowledge of tooling and insertsAbility to determine tool wear, dull and broken tools and to change toolsAbility to calculate tool offsetsAbility to maintain close tolerancesKnowledge of Math including algebra and geometryBasic program knowledge1+ years setup experienceTool setup and tool maintenance knowledgeMachine Shop training classesSafety knowledgePrevious experience in a company with ISO implementationAbility to do SPC controlEducational/Certification Requirement: High School Graduate or equivalentMachine shop training certificate preferred.Work Experience: 4+ years of machine shop programming experience on any manual or CNC milling equipment5 or more years of machine shop experience with pertinent CNC milling experiencePhysical Demands and Working Conditions: This section is required for compliance with the Americans with Disabilities Acts (ADA)Work Environment: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functionsWork is performed primarily in a Manufacturing Machine shop environmentPhysical Demands: Work in a Manufacturing Machine ShopAbility to stoop, kneel, crouch, reach, walk, push, pull and grasp.Ability to lift up to 25 lbs.Ability to move arms, hands, and fingers.Required to have visual acuity to perform assigned tasks.Ability to talk on phone and use computer for extended periods of time may be required.Environmental Exposure: May involve exposure to moderate noise levels from printers, faxes, computer etc.

  • CNC Programmer/Machinist

    1 week ago

    Chandler, Arizona, United States Randstad Full time

    CNC Programmer/Machinist Job DescriptionWe are seeking a skilled CNC Programmer/Machinist to join our team at Randstad. As a CNC Programmer/Machinist, you will be responsible for interpreting mechanical prints, utilizing CNC Mill machines, and programming parts using CAM software.Key Responsibilities:Interpret and understand mechanical printsUtilize a CNC...

  • CNC Programmer/Machinist

    1 week ago

    Chandler, Arizona, United States Randstad Full time

    CNC Programmer/Machinist Job DescriptionWe are seeking a skilled CNC Programmer/Machinist to join our team at Randstad. As a CNC Programmer/Machinist, you will be responsible for interpreting mechanical prints, utilizing a CNC Mill machine, and programming parts using CAM software.Responsibilities:Interpret and understand mechanical printsUtilize a CNC Mill...

  • CNC Programmer/Machinist

    1 week ago

    Chandler, Arizona, United States UCT Alumni Association Full time

    Job SummaryUCT is seeking a skilled CNC Programmer/Machinist to join our team in Chandler, Arizona. This role is responsible for programming and updating programs for the CNC Milling Department, as well as assisting with job setup and machining parts.Key Responsibilities:Read and interpret prints, perform complex dimensional calculations, and understand...

  • CNC Machinist

    3 weeks ago

    Chandler, Arizona, United States Ultra Clean Technology Systems & Svc Inc Full time

    Job Title: CNC Programmer/MachinistUltra Clean Technology Systems & Svc Inc is seeking a skilled CNC Programmer/Machinist to join our team in Chandler, Arizona.Job Summary:The CNC Programmer/Machinist will be responsible for programming and updating programs for the CNC Milling Department, as well as assisting with setting up jobs and machining parts.Key...

  • CNC Machinist

    1 week ago

    Chandler, Arizona, United States UCT Alumni Association Full time

    Job Title: CNC Programmer/MachinistJoin UCT and be part of the fastest-growing sector in the world. We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it.UCT is a...

  • CNC Machinist

    3 weeks ago

    Chandler, Arizona, United States Blue Horizon Solutions Full time

    Job Opportunity: CNC MachinistWe are seeking a skilled CNC Machinist to join our team at Blue Horizon Solutions in Berlin. As a CNC Machinist, you will be responsible for performing machining processes, setting up and operating CNC-controlled machines, and ensuring quality through regular inspection of finished parts.Key Responsibilities:Perform machining...

  • CNC Programmer

    3 weeks ago

    Chandler, Arizona, United States TALENTPRO CONSULTING, INC Full time

    Job Title: CNC ProgrammerWe are seeking a skilled CNC Programmer to join our team at TALENTPRO CONSULTING, INC. As a CNC Programmer, you will be responsible for developing and writing programs for numerically controlled machines using engineering specifications and drawings.Key Responsibilities:Develop and write programs for CNC machines, including mills and...

  • CNC Machinist

    2 weeks ago

    Chandler, Arizona, United States Randstad Full time

    CNC Programmer Job DescriptionWe are seeking a skilled CNC Programmer to join our team at Randstad. As a CNC Programmer, you will play a crucial role in shaping the future of manufacturing by developing and optimizing CNC programs for various machining processes.Key Responsibilities:Develop and optimize CNC programs for various machining processes.Set up and...

  • CNC Machinist

    6 days ago

    Chandler, Arizona, United States Randstad Full time

    CNC Programmer Job DescriptionWe are seeking a skilled CNC Programmer to join our team at Randstad. As a CNC Programmer, you will play a crucial role in shaping the future of manufacturing by developing and optimizing CNC programs for various machining processes.Key Responsibilities:Develop and optimize CNC programs for various machining processes.Set up and...

  • CNC Machinist

    3 weeks ago

    Chandler, Arizona, United States PDS Defense Full time

    Numerical Control Programmer Job DescriptionPDS Defense, Inc. is seeking a skilled Numerical Control Programmer to join our team in Chandler, AZ.Job Summary:As a Numerical Control Programmer, you will be responsible for supporting the design and manufacture of hardware in a machine shop setting. You will work with CNC and manual manufacturing tooling,...

  • CNC Machinist

    3 weeks ago

    Chandler, Arizona, United States ALIGN PRECISION - CHANDLER, LLC Full time

    Job SummaryWe are seeking a highly motivated CNC Machinist to join our team at ALIGN PRECISION - CHANDLER, LLC. As a CNC Machinist, you will be responsible for setting up and operating CNC machines to produce high-quality parts.Key ResponsibilitiesSet up and operate CNC machines with and without live tooling.Read and follow job router, set-up sheet, and work...

  • CNC Programmer

    2 weeks ago

    Chandler, United States Softpath System, LLC. Full time

    Softpath is an award winning national consulting and staffing firm headquartered in Metro Atlanta area with over 800 employees globally. We support Fortune 500 clients in 20+ verticals including State/Federal Agencies, Pharma, Financial, Healthcare, IT, Retail, Telecom and Mfg. Softpath is well known for the great care we take with our clients and employees...

  • CNC Machinist 2nd Shift

    1 week ago

    Chandler, United States Fathom Mfg Full time

    CNC Mill Set Up Machinist Job SummaryWe are seeking a skilled CNC Mill Set Up Machinist to join our team at Fathom Mfg. As a CNC Mill Set Up Machinist, you will be responsible for setting up and operating CNC Horizontal and Vertical machines, specifically Haas UMC 750 5-axis and Mori DMG Horizontal. You will also perform MDI programming for efficient part...

  • CNC Machinist 3rd Shift Position

    2 weeks ago

    Chandler, Arizona, United States Randstad Full time

    Job SummaryRandstad is seeking a skilled CNC Machinist to join our team. As a CNC Machinist, you will be responsible for operating machinery, performing maintenance, and monitoring output. Your attention to detail will ensure high-quality production, and your organizational skills will prepare output for shipment.Key ResponsibilitiesOperate CNC machinery to...

  • Computer Numerical Control Programmer

    2 days ago

    Chandler, United States PC Drilling Inc. Full time

    Job OverviewWe are a custom fiberglass and plastic fabricating services company in Chandler, AZ. We're looking for a skilled CNC Programmer/Machine operator to join our team. The ideal candidate will be responsible for programming and operating CNC machines to produce precision parts and instruments.Duties- Develop programs for CNC machines using software...

  • CNC Programmer 3

    3 weeks ago

    Chandler, United States Donatech Corporation Full time

    Job DescriptionJob DescriptionJob Title: CNC ProgrammerLocation: Chandler, AZ 85286Pay: $48.25 per hour Duration: 12 Months ContractSchedule: 9/80 work weekOnly "US CITIZENS" are required on this position.Job Description:•    Supports design and manufacture of hardware in a machine shop setting through use of CNC and manual manufacturing...

  • Senior CNC Programmer Expert

    2 weeks ago

    Chandler, United States Heraeus Full time

    Senior CNC Programmer ExpertLocation Chandler - ArizonaPermanent Full TimeAbout HeraeusSolutions from the Heraeus Group provide faster internet, rid water of germs, and keep hearts beating in time. As a family-owned global technology group, we combine materials expertise and technological leadership to create the most diverse products, all with one thing in...

  • CNC Operator

    2 weeks ago

    Chandler, United States Nesco Resource Full time

    Job SummaryWe are seeking a Level 1 (Entry Level) CNC Operatorto join our team!No set up experience is required, CNC machines DMG Mori, Okuma & Tsugami Swiss.As a CNC Mill Machinist, you will maintain and operate various mills to produce parts from aluminum, steel, and stainless steel. You will load and unload parts, identify and change out broken tools,...

  • SR. CNC

    2 weeks ago

    Chandler, United States ASD, Inc. Full time

    Supports design and manufacture of hardware in a machine shop setting through use of CNC and manual manufacturing tooling. Responsibilities include manufacture of hardware, training of less experienced personnel, adherence and enforcement of safety standards, and skillset progression through training. Develops and writes programs for numerically controlled...

  • EDM Machinist

    1 week ago

    Chandler, Arizona, United States Eastridge Full time

    Job Title: EDM MachinistEastridge Workforce Solutions is a leading provider of workforce management solutions, committed to connecting skilled professionals with meaningful career opportunities.Job Summary: We are seeking an experienced EDM Machinist to join our team in Chandler, AZ. As an EDM Machinist, you will be responsible for the efficient and accurate...