Quality Engineer

QUALITY ENGINEER – HOLTEC Manufacturing Division: East Pittsburgh, PA QUALITY ENGINEER ROLES and RESPONSIBILITY: Holtec Quality Engineer is responsible to provide a technical foundation for developing/ supporting Holtec operations as required to comply with the requirements of 10CFR50 Appendix B, NQA-1, ASME Section III, ASME Section VIII, ISO 9000 and other industry consensus.

The

Quality Engineer shall provide oversight and guidance to ensure compliance at the manufacturing facility. The Quality Engineer will coach manufacturing colleagues on proper compliance along with identifying and escalating quality issues, to ensure product quality and proper techniques. May have cross functional training and aid with manufacturing operations such as maintaining Manufacturing Inspection & Test Plans. In this position, the Quality Engineer will be a member of the quality assurance team that assures product and process documents match the specifications based on established specifications, codes, standards and procedures along with identifying, tracking and closure of deviations from established standards, in the manufacturing of products. The Quality Engineer reports directly to the HMD Quality Manager. QUALITY ENGINEER JOB REQUIREMENTS: Strong interpersonal and communication skills to interact with all Holtec teams. Perform defect trend analysis and root cause analysis of Holtec nonconforming material and processes. Create, evaluate, trend and oversee the results of internal and external corrective action request. Generate, revise and implement Holtec Work Instructions. Support internal and external surveillance and/or audits of Holtec and/ or vendor operations and processes. Provide technical support for work in process activities, new product evaluations, test and inspection activities as required. Supervise Holtec Quality Inspectors and provide daily technical support to Holtec Teams. Support Holtec receiving inspection requirements. Provide support for Measuring and Test Equipment maintenance and calibration requirements. Ability to use metrology and statistical methods to diagnose and correct improper quality control practices. Perform Holtec documentation and regulatory requirements to complete/verify document packages are acceptable to the Interdivision Purchase Requisition (IPR) requirements. Support Holtec requirements for new hire training and annual retraining of Holtec Team members. Quality Engineer to manage and/ or train the Quality Team members in the department QUALITY ENGINEER COMPETENCIES: Nuclear Safety Conscience Technical Capacity Organizational Skills Problem Solving/ Analytical Customer/ Client Focus Time Management Performance Management Leadership QUALITY ENGINEER EDUCATIONAL AND PROFESSIONAL REQUIREMENTS: BS Engineering or equivalent, preferred in Mechanical or Industrial Engineering, or

AS degree with one year of quality assurance related work, or a high school diploma plus three (3) years of quality assurance related work. QUALITY ENGINEER PREFERRED SKILLS: Knowledge of applicable codes including, but not limited to,

10CFR50 Appendix B, NQA-1, ASME Section III, ASME Section VIII, ASNT-TC-1A, ISO 9000 and other industry consensus. Knowledge of Non-Destructive Examination Methods (e.g., VT, PT, MT, UT, RT, etc.) Statistical process control knowledge. QUALITY ENGINEER SPECIAL RESPONSIBILITIES: Conduct evaluations and oversight of production personnel and processes to ensure procedures are being followed in accordance with design requirements, specifications, codes, standards and regulatory guidelines. Implement process improvements with a focus on quality processes. Provide input and decision making for quality on the shop floor regarding manufacturing and deviations. Provide corrective action as necessary. Work closely with Manufacturing and other support functions to troubleshoot during unexpected events. Complete projects as identified by management. Create, review and approve Good Manufacturing Practices through surveillance reporting. Track, review and maintain Manufacturing & Inspection Test Plans and associated records to ensure that the information and documentation conforms to all requirements. Create, review, track and close deviations and consistently produce quality work. Accurately communicate supply, operational needs and escalate issues with potential impact. Provide Real Time Quality impact assessments and decisions on product and equipment issues and escalate as necessary. Maintain inspection readiness, support inspections from regulatory agencies & customers. Participate in Improvement projects, Corrective Action / Preventative Action Effectiveness, etc. as appropriate. Assist and support the manufacturing staff in detecting and solving compliance errors in real time during manufacturing and packaging operations. Help to define appropriate action plans for improvement and follow-up and communicate action closures. What's your highest level of education completed?

College or University Desired salary The following questions are entirely optional.

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more . Invitation for Job Applicants to Self-Identify as a U.S. Veteran A “disabled veteran” is one of the following:

a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service. An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense. An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985. I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE I AM NOT A PROTECTED VETERAN I DON’T WISH TO ANSWER

Voluntary Self-Identification of Disability Voluntary Self-Identification of Disability Form CC-305 OMB Control Number 1250-0005 Expires 5/31/2023 Why are you being asked to complete this form? We are a federal contractor or subcontractor required by law to provide equal employment opportunity to qualified people with disabilities. We are also required to measure our progress toward having at least 7% of our workforce be individuals with disabilities. To do this, we must ask applicants and employees if they have a disability or have ever had a disability.Because a person may become disabled at any time, we ask all of our employees to update their information at least every five years. Identifying yourself as an individual with a disability is voluntary, and we hope that you will choose to do so. Your answer will be maintained confidentially and not be seen by selecting officials or anyone else involved in making personnel decisions. Completing the form will not negatively impact you in any way, regardless of whether you have self-identified in the past.For more information about this form or the equal employment obligations of federal contractors under Section 503 of the Rehabilitation Act, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp . How do you know if you have a disability? You are considered to have a disability if you have a physical or mental impairment or medical condition that substantially limits a major life activity, or if you have a history or record of such an impairment or medical condition.

Disabilities include, but are not limited to: Autism Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, or HIV/AIDS Blind or low vision Cancer Cardiovascular or heart disease Celiac disease Cerebral palsy Deaf or hard of hearing Depression or anxiety Diabetes Epilepsy Gastrointestinal disorders, for example, Crohn's Disease, or irritable bowel syndrome Missing limbs or partially missing limbs Nervous system condition for example, migraine headaches, Parkinson's disease, or Multiple sclerosis (MS) Psychiatric condition, for example, bipolar disorder, schizophrenia, PTSD, or major depression Please check one of the boxes below:

YES, I HAVE A DISABILITY, OR HAVE A HISTORY/RECORD OF HAVING A DISABILITY

NO, I DON'T HAVE A DISABILITY, OR A HISTORY/RECORD OF HAVING A DISABILITY

I DON'T WISH TO ANSWER PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

#J-18808-Ljbffr