Surface Technician

2 months ago

Waite Park, United States HonorVet Technologies Full time
Surface Technician | ESSRJP00006601
Location: Waite Park MN USA 56387
Duration: 6+months with possibility of extension Full Time Conversion
Shift: 1st shift 7:30 am -3:30 pm. Monday to Friday.

Job Description
The primary focus of this position is to rotate into all areas of the surfacing department, creating the power of the lenses according to Doctor specification. Duties of this position are usually repetitive, requiring limited analysis and use of individual judgment. Specific duties for this position include taping and blocking the lenses, generating, pulling tools, fining and polishing, and lens washing. Supervision ranges from close to general. Essential Duties: Percentage of Time All duties to be performed according to the established standard and in compliance with all company policies and procedures while maintaining regular, prompt attendance and availability for overtime as needed: Surfacing Blocker: Utilize the blocking machine to accurately secure a block to all lenses going through the surfacing department. Operate taping equipment to apply protective tape to the front of the lenses. 20% Generator Operator: Operate the generator machine used to cut the lenses to the correct prescription. 20% Surface Finer/Polisher: Operate the equipment used to fine and polish all lenses going through the surfacing department. 20% Tool Puller: Numerically locate the correct tools for polishing and fining and place them in the appropriate tray. Return tools to rack once complete. 15% Lens Washer: Hand wash and dry lenses followed by a brief cosmetic inspection of the lenses. Grasp lens with deblocking cup and strike against table to remove block from lenses. Remove tape from lenses. 15% Spin Coat Operator: Operate the coating machine to apply spin coat and perform a cosmetic inspection of the lenses. 10%Other Duties: Remove swarf bag and place in proper area as needed. Make adjustments to the lenses to correct issues such as sharp edges by grasping the lens and using a bevel wheel to remove the sharp edge. Perform other duties within the surfacing department or other areas as assigned. Maintain a clean and organized work environment. Observe all company policies, rules, and safety practices. Physical Demands: The tasks of this position generally requires duties to be performed by: Frequently lift and move up to 20 lbs to waist height unaccompanied. Occasionally lift and move up to 15 lb above shoulder height unaccompanied and 35 lbs to waist height unaccompanied. Regularly stand/walk for the duration of shift. Occasionally required to sit, stoop, climb, or balance. Coordinated use of hands and fingers to grasp, feel objects, transfer small items from one hand to another, fine manipulation, and bilateral reach with arms. Use of close vision, color vision, depth perception and ability to adjust focus.Work Environment: Fast paced, production environment. Regularly work with others. The noise level in the laboratory is generally moderate. Regularly required to work with or around chemicals. Work area may be wet/dirty. Regularly works near moving mechanical parts. Safety and Ergonomic Requirements: Must practice safe work practices at all times and report any unsafe conditions immediately. Required to wear the appropriate PPE while in the laboratory, including but not limited to safety eyewear and enclosed shoes. Attend and participate in all required safety trainings. Follow all Lock Out/Tag Out procedures as required for both authorized and affected users. Participate in daily ergonomic stretches and follow all ergonomic requirements of the position. Follow all personal dress requirements according to the established dress code and safety requirements. Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience High School education or equivalent preferred. 2-5 years previous related experience and/or training helpful.Language Ability Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write short correspondence. Ability to communicate effectively in a team environment. Math Ability Basic ability to add and subtract. Understand decimal numerical sequencing.Reasoning Ability Ability to multi-task and prioritize. Demonstrate good judgement and decision making skills.Computer Skills Basic computer skills.Certificates and Licenses None required.

  • Surface Technician

    3 weeks ago

    Waite Park, United States HonorVet Technologies Full time

    Surface Technician | ESSRJP00006601 Location: Waite Park MN USA 56387Duration: 6+months with possibility of extension Full Time ConversionShift: 1st shift 7:30 am -3:30 pm. Monday to Friday.Job DescriptionThe primary focus of this position is to rotate into all areas of the surfacing department, creating the power of the lenses according to Doctor...

  • Surface Technician

    4 weeks ago

    Waite Park, Minnesota, United States HonorVet Technologies Full time

    Job DescriptionThe primary focus of this position is to rotate into all areas of the surfacing department, creating the power of the lenses according to Doctor specification.Duties of this position are usually repetitive, requiring limited analysis and use of individual judgment. Specific duties for this position include taping and blocking the lenses,...

  • Detail Technician

    2 months ago

    Buena Park, United States AutoNation Full time

    AutoNation - Job Posting Location [Auto Detailer / Car Detailer] As a Detail Technician at AutoNation, you'll: Operate automated car wash to remove surface dirt on vehicles; Vacuum all interior surfaces, spot-clean textile stains, and clean solid surfaces; Clean exterior surfaces using cleaners, mechanical buffers and polishing compounds; Maintain inventory...

  • Floor Maintenance Technician

    1 month ago

    Orange Park, Florida, United States 4M Building Solutions Full time

    Job Title: Floor Maintenance TechnicianAbout the Role:The Floor Maintenance Technician will be responsible for maintaining the cleanliness and appearance of hard surfaces and carpets in client buildings and facilities. This includes timely completion of floor care areas based on a schedule, proper care of floor machinery, and promoting a safe work...

  • Automotive Body Repair Technician

    4 weeks ago

    Highland Park, Michigan, United States LaFontaine Automotive Group Full time

    Job Summary:The LaFontaine Automotive Group is seeking a skilled Automotive Body Repair Technician to join our team. As a key member of our collision repair center, you will be responsible for repairing damaged body parts and bodies of vehicles in accordance with factory and dealership specifications.Key Responsibilities:Remove upholstery, accessories,...

  • Floor Technician

    1 month ago

    Cedar Park, Texas, United States ServiceMaster Commercial Cleaning and Maintenance Co. by Kent Full time

    Job SummaryWe are seeking a skilled Floor Technician to join our team at ServiceMaster Commercial Cleaning and Maintenance Co. by Kent. As a Floor Technician, you will be responsible for cleaning, maintaining, and repairing carpeted and hard floor surfaces. This includes sweeping, mopping, polishing, vacuuming, shampooing carpets, stripping, waxing, buffing,...

  • Engineering Technician

    1 month ago

    overland park, United States TALENT Software Services Full time

    Are you an experienced Engineering Technician with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced Engineering Technician to work in Overland Park, KS.Primary Responsibilities/Accountabilities:Assist with the development of site drainage, grading, and utility plans using Autodesk Civil 3D...

  • Engineering Technician

    2 months ago

    Overland Park, United States TALENT Software Services Full time

    Are you an experienced Engineering Technician with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced Engineering Technician to work in Overland Park, KS.Primary Responsibilities/Accountabilities:Assist with the development of site drainage, grading, and utility plans using Autodesk Civil 3D...

  • Engineering Technician

    2 months ago

    overland park, United States TALENT Software Services Full time

    Are you an experienced Engineering Technician with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced Engineering Technician to work in Overland Park, KS.Primary Responsibilities/Accountabilities:Assist with the development of site drainage, grading, and utility plans using Autodesk Civil 3D...

  • Engineering Technician

    1 month ago

    Overland Park, United States TALENT Software Services Full time

    Are you an experienced Engineering Technician with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced Engineering Technician to work in Overland Park, KS.Primary Responsibilities/Accountabilities:Assist with the development of site drainage, grading, and utility plans using Autodesk Civil 3D...

  • Powder Coating Technician

    1 month ago

    Villa Park, United States Innovated Staffing Full time

    Job SummaryWe are seeking a highly skilled Powder Coating Technician to join our team at Innovated Staffing. The ideal candidate will have a minimum of 5 years of experience with powder coating and a strong background in operating spray guns, booths, and other equipment.Key Responsibilities:Preparing surfaces for powder coating by degreasing and...

  • Maintenance Technician I

    4 weeks ago

    Avon Park, Florida, United States Marriott International Inc Full time

    Job SummaryWe are seeking a skilled Maintenance Technician to join our team at The Ritz-Carlton. As a Maintenance Technician, you will be responsible for performing routine maintenance tasks, responding to guest repair requests, and ensuring the overall upkeep of our facilities.Key ResponsibilitiesPerform routine maintenance tasks, including cleaning and...

  • Optical Technician

    4 weeks ago

    Brooklyn Park, Minnesota, United States LUXOTTICA OF AMERICA INC Full time

    Job Summary:The Optical Technician is responsible for the set-up, operation, and basic maintenance of equipment within the assigned area for work task/job in surface or finish portions of lab production.Key Responsibilities:Perform various tasks of area production machine functions:Interpretation of Rx work ticketPerform production operations on specified...

  • Environmental Services Technician

    4 weeks ago

    Orland Park, Illinois, United States Smith Crossing Full time

    At Smith Crossing, we are seeking a skilled Environmental Services Technician to join our team. As a key member of our Environmental Services Team, you will play a vital role in maintaining a clean, safe, and pleasant community for our residents.Job Responsibilities:Clean and disinfect various surfaces, furnishings, equipment, and areas throughout the...

  • Maintenance Technician

    4 weeks ago

    Brooklyn Park, Minnesota, United States MRA Recruiting Services Full time

    Job Summary:We are seeking a highly skilled Maintenance Technician to join our team at Scherer Bros. The ideal candidate will have 3 years of experience in CNC machinery/manufacturing maintenance and be able to read and interpret documents, safety rules, and operating manuals.Responsibilities:Repair and maintain CNC machinery (e.g., belts, bearings)Replace...

  • Environmental Services Technician

    4 weeks ago

    Orland Park, United States Smith Crossing Full time

    Full-time Role 2PM - 10PM Shift Must be available to work some holidays. Build your career on a solid foundation. Our Environmental Services Team brightens the lives of our residents by maintaining a clean, safe and pleasant community. Job Description: The Environmental Services Technician is responsible for cleaning and disinfecting various surfaces,...

  • Environmental Services Technician

    3 weeks ago

    Orland Park, United States Smith Crossing Full time

    Full-time Role 2PM - 10PM Shift Must be available to work some holidays. Build your career on a solid foundation. Our Environmental Services Team brightens the lives of our residents by maintaining a clean, safe and pleasant community. Job Description: The Environmental Services Technician is responsible for cleaning and disinfecting various surfaces,...

  • Automotive Body Repair Technician

    4 weeks ago

    Highland Park, Michigan, United States LaFontaine Automotive Group Full time

    Job Summary: We are seeking a skilled Automotive Body Repair Technician to join our team at LaFontaine Automotive Group.Key Responsibilities:Repair damaged body parts and bodies of vehicles in accordance with factory and dealership specifications.Use hand tools and power tools to complete repairs.Remove upholstery, accessories, electrical and hydraulic...

  • Painter

    2 months ago

    DEER PARK, United States Brown & Root Industrial Services Full time

    Brown & Root Industrial Services - 6519 East Boulevard Gate 21 [Maintenance Technician] As a Painter at Brown & Root, you'll: Apply paint, varnish, and other finishes to walls, ceilings, and other surfaces with brushes, rollers, and spray machines; Prepare the surfaces to receive the coatings by cleaning the dirt, oil, and grease from the surfaces to be...

  • Painter

    3 weeks ago

    Deer Park, United States Brown & Root Industrial Services Full time

    Brown & Root Industrial Services - 6519 East Boulevard Gate 21 [Maintenance Technician] As a Painter at Brown & Root, you'll: Apply paint, varnish, and other finishes to walls, ceilings, and other surfaces with brushes, rollers, and spray machines; Prepare the surfaces to receive the coatings by cleaning the dirt, oil, and grease from the surfaces to be...