CNC Machinist/Set Up, 2nd Shift

4 weeks ago

Santa Ana, United States Brasstech Full time
Job Summary

The CNC Machinist/Setup role will perform set ups and operate various CNC mills, lathes and manual machines to support a production-paced environment.

ESSENTIAL DUTIES AND RESPONSIBLITIES
  • Set-up CNC lathes, mills, manual machines and/or inspection equipment for production jobs in a responsive manner to support a production paced environment.
  • Maintain, and update setup procedures for all critical processes.
  • Work from blueprints, job routings and tooling instructions to hold close tolerances.
  • Required to use computer skills to transfer programs to a variety of CNC machines.
  • Inspect parts to print including both dimensional and visual requirements.
  • Complete all required documentation for the job including part measurements and shop floor paperwork.
  • Train and mentor less experienced machinists, especially on machine setup.
  • Must be able to run more than one machine where cycle time permits.
  • Performs other duties as required.
MINIMUM REQUIRED QUALIFICATIONS

Educations and/or Experience
  • High School diploma or GED is required.
  • Must possess experience with CNC mill and lathe setup
SKILLS, KNOWLEDGE, AND ABILITIES
  • Thorough knowledge of machine shop and tool room practices
  • Understanding of machining properties of various metals
  • Knowledge of proper application and operation of CNC equipment
  • Strong math and problem-solving skills.
  • Ability to change tools, adjust heights and tool compensations
  • Ability to read and interpret drawings and specifications
  • Proficiency with hand measuring tools and inspection equipment
  • Strong interpersonal and teamwork skills
Computer Skills
  • Microsoft Office (Outlook, Word, Excel)
  • Computer skills to transfer programs to a variety of CNC machines.
Language Skills
  • English (reading, writing, verbal)
Mathematical Skills
  • Basic math skills (add, subtract, divide, multiply)
Other Skills
  • Must be able to work all shifts, including weekends and holiday hours.
  • Ability to legally work without sponsorship for employment visa status.
PREFERRED QUALIFICATIONS (only provide if needed)
  • Experience with Brother, Haas, and Mazak controls
  • Experience writing or editing machine programs


PHYSICAL DEMANDS

While performing the duties of this job, the employee will have occasional bending, squatting, climbing, and twisting. There will be occasional usage of his/her hands to power grasp and manipulate objects, tools or controls, and occasional pushing, pulling and reaching above the shoulders. The position requires frequent walking and standing, as well as repetitive usage of hands for simple grasping, fine manipulation, and reaching below shoulder level. Additionally, this position requires the ability to occasionally lift up to 50 pounds and frequently lift up to 35 pounds with or without assistance. Required to wear PPE (ie. Face, foot, eye, hand, and/or hearing protection on plant floor).

WORK ENVIRONMENT

While performing the duties of this job, the employee will work in warehouse environment; and will be exposed to machine shop elements such as noise, dust, fumes, cold and heat on frequent basis. The ambient conditions are moderate, and the noise level in the work environment is moderate.

Company: Brasstech

Shift 2 (United States of America)

Full time

Hiring Range: $24.80 - $34.65

Actual compensation may vary based on various factors including experience, education, geographic location, and/or skills.

Brasstech (the "Company") is an equal opportunity employer and we want to have the best available persons in every job. The Company makes employment decisions only based on merit. It is the Company's policy to prohibit discrimination in any employment opportunity (including but not limited to recruitment, employment, promotion, salary increases, benefits, termination and all other terms and conditions of employment) based on race, color, sex, sexual orientation, gender, gender identity, gender expression, genetic information, pregnancy, religious creed, national origin, ancestry, age, physical/mental disability, medical condition, marital/domestic partner status, military and veteran status, height, weight or any other such characteristic protected by federal, state or local law. The Company is committed to complying with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in the operations of the Company regardless of where the employee is located and prohibits unlawful discrimination by any employee of the Company.

Brasstech is an E-Verify employer. E-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. Please click on the following links for more information.

E-Verify Participation Poster: English & Spanish

E-verify Right to Work Poster: English, Spanish

  • CNC Machinist

    2 weeks ago

    Santa Ana, California, United States Aerotek Full time

    **CNC Machinist** **(Pay Rate $25/hr to $35/hr)** **Description:** + Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a production-paced environment. **Responsibilities** + Set-up CNC lathes, mills, manual machines and/or inspection equipment for production jobs in a responsive manner to support a...

  • CNC Machinist

    2 weeks ago

    Santa Ana, California, United States Aerotek Full time

    CNC Machinist(Pay Rate $25/hr to $35/hr)Description: Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a production-paced environment. ResponsibilitiesSet-up CNC lathes, mills, manual machines and/or inspection equipment for production jobs in a responsive manner to support a production paced...

  • CNC Lathe Operator

    4 weeks ago

    Santa Ana, United States Aerospace Engineering Full time

    Job DescriptionJob DescriptionCNC Lathe Machinist - 2nd ShiftAbout USThrough the support of our four divisions (AAE Aerospace, AEC, AMRO, and Systima), Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the...

  • CNC Lathe Operator

    1 month ago

    Santa Ana, United States Aerospace Engineering Full time

    Job DescriptionJob DescriptionCNC Lathe Machinist - 2nd ShiftAbout USThrough the support of our four divisions (AAE Aerospace, AEC, AMRO, and Systima), Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the...

  • CNC Lathe Operator

    4 weeks ago

    Santa Ana, United States Aerospace Engineering Full time

    Job DescriptionJob DescriptionCNC Lathe Machinist - 2nd ShiftAbout USThrough the support of our four divisions (AAE Aerospace, AEC, AMRO, and Systima), Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the...

  • CNC Lathe Machinist | 2nd Shift, $20-$25 Hourly | Santa Ana, CA

    4 weeks ago

    Santa Ana, United States Karman Space & Defense Full time

    Job DescriptionJob DescriptionSUMMARY:Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be...

  • CNC Lathe Machinist | 2nd Shift, $20-$25 Hourly | Santa Ana, CA

    4 weeks ago

    Santa Ana, United States Karman Space & Defense Full time

    Job DescriptionJob DescriptionSUMMARY:Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be...

  • CNC Lathe Machinist | 2nd Shift, $20-$25 Hourly | Santa Ana, CA

    4 weeks ago

    Santa Ana, United States Karman Space & Defense Full time

    Job DescriptionJob DescriptionSUMMARY:Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be...

  • 3rd Shift CNC Machinist

    2 weeks ago

    Santa Ana, United States Aerotek Full time

    **Job Title: 3rd Shift CNC Machinist** **Job Description** Seeking three skilled CNC Machinists for the 3rd shift (9:00pm-5:30am) at our large machine shop in Santa Ana, CA. This role offers a competitive hourly rate between $25-$35, with overtime opportunities. The CNC Machinist will be responsible for setting up and operating various CNC mills, lathes, and...

  • 3rd Shift CNC Machinist

    4 weeks ago

    Santa Ana, United States Aerotek Full time

    **_3RD SHIFT CNC MACHINSTS NEEDED!!_** **_INTERVIEW & START RIGHT AWAY!_** **Description:** Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a...

  • 3rd Shift CNC Machinist

    4 weeks ago

    Santa Ana, United States Aerotek Full time

    **_3RD SHIFT CNC MACHINSTS NEEDED!!_** **_INTERVIEW & START RIGHT AWAY!_** **Description:** Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a...

  • 3rd Shift CNC Machinist

    2 weeks ago

    Santa Ana, California, United States Aerotek Full time

    **_3RD SHIFT CNC MACHINSTS NEEDED_** **_INTERVIEW & START RIGHT AWAY_** **Description:** Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a...

  • 3rd Shift CNC Machinist

    2 weeks ago

    Santa Ana, United States Aerotek Full time

    **Description:**Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a production-paced environment.Essential Duties And ResponsibilitiesSet-up CNC...

  • 3rd Shift CNC Machinist

    2 weeks ago

    Santa Ana, United States Aerotek Full time

    Description: Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a production-paced environment. Essential Duties And Responsibilities Set-up CNC...

  • CNC Lathe Machinist | 2nd Shift, $20-$25 Hourly | Santa Ana, CA

    6 days ago

    Santa Ana, United States Karman Space & Defense Full time

    Job DescriptionJob DescriptionSUMMARY:Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be...

  • CNC Lathe Machinist | 2nd Shift, $20-$25 Hourly | Santa Ana, CA

    2 weeks ago

    Santa Ana, United States Karman Space & Defense Full time

    Job DescriptionJob DescriptionSUMMARY:Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be...

  • 3rd Shift CNC Machinist

    2 weeks ago

    Santa Ana, California, United States Aerotek Full time

    Description:Three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a production-paced environment.Essential Duties And ResponsibilitiesSet-up CNC lathes,...

  • CNC Lathe Machinist

    2 weeks ago

    Santa Ana, California, United States Karman Space & Defense Full time

    Job DescriptionSUMMARY:Operate the CNC machine efficiently by ensuring material, tooling, cutters, NC Programs, and equipment readiness. Coordinate product flow with Management to meet Customer demand. Collaborate with NC Programmers for set-ups and product manufacturing. The CNC machinist's role in the QMS and its impact on quality is crucial. They are...

  • CNC Lathe Operator

    6 days ago

    Santa Ana, United States Aerospace Engineering Full time

    Job DescriptionJob DescriptionSUMMARY:Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be...

  • CNC Machinist

    7 days ago

    Santa Fe Springs, United States RBC Bearings Incorporated Full time $18 - $24

    DESCRIPTION:2nd shift hours are Monday afternoon - Friday morning 3pm – 11:30pmJOB TITLE/LOCATION: CNC Machinist - 2nd Shift Pay Range: $18-$24 the hour- DEPENDS ON EXPERIENCE.ESSENTIAL FUNCTIONS OF THE JOB:Operate CNC machines and inspect partsDepending on experience trouble shooting, completing setupsDaily use of hand tools including pneumatic assembly...