Paint/Adhesive Application Engineer
3 weeks ago
- Provide Advance, Product, & Manufacturing engineering feasibility support for new paint/adhesive systems.
- Develop supplier RFQ's. Recommend appropriate/coating/adhesive technologies, quote, reviews/vetting, sourcing decision, and technical discussions with IAC management & OEM's.
- Support manufacturing facility
- Assist IAC plant in racks design and development to achieve optimum loading factors within system application cycle time.
- Assist in system run-offs and approval processes to assure prompt PPAP based quoted cycle times and OEE.
- Participate in cost negations pertaining to racks and fixture engineering change costs.
- Support pre-production system start up at IAC Manufacturing plants during the PPAP process.
- Provide technical support to IAC Manufacturing plants on troubleshooting existing manufacturing processes and/or product lines to achieve customer quality standards and profit objectives.
- Assist in optimizing manufacturing efficiency and quality standards through the implementation of improved processes, materials, methods, and facilities.
- Maintain IAC paint and adhesive equipment standards.
- Ensure projects are executed with the proper safety devices per OSHA, NFPA, ANSI and IAC Standards.
- Supporting appropriate plant Kaizen as required.
Physical Requirements:
- Must have flexibility to work at and travel to IAC plant locations and supplier locations.
- 30%-40% of time will be spent traveling supporting manufacturing locations
Education:
- BS/BA required.
- MS/MBA preferred.
- Requires 8-12 years of experience.
- 10+ years in paint process/application.
- Knowledge of basic paint chemistry and solvents.
- Must understand and able to calculate paint transfer efficiency.
- Understanding of adhesive characteristic and application.
- Develops and analyzes statistical data to establish and control all aspects of the assigned processes.
- Assist in process optimization changes and cost saving opportunities.
- Review product changes to determine process and equipment changes required with plant process engineer.
- Investigate product quality changes as well as facility changes needed related to current/new model development.
- Process planning and modifications (current/new model development) with plant process engineer.
- Understanding surface treatment methods and process. (Flame, plasma, corona, or adhesion promoter.)
- Review and interpret OSHA, ANSI, NFPA, or other applicable regulations for new system with plant process engineer.
- Must have good negotiating skills. Position involves reviewing and establishing tool costs with suppliers and OEM cost analyst.
- Must be able to work independent of direct supervision, especially when away from the office.
- Must be able to work as a member of the launch team, be proficient at working with all levels of the organization, while maintaining a sense of individual accountability and responsibility.
-
Paint/Adhesive Application Engineer
4 days ago
Troy, United States IAC Group Full timeGeneral Description: Provide Advance, Product, & Manufacturing engineering feasibility support for new paint/adhesive systems. Develop supplier RFQ’s. Recommend appropriate/coating/adhesive technologies, quote, reviews/vetting, sourcing decision, and technical discussions with IAC management & OEM’s. Support manufacturing facility Assist IAC plant in...
-
Application Engineer
1 day ago
Troy, United States Venteon Full timeVenteon is currently seeking an experienced Paint Application Engineer to fill an opening with a Tier 1 Manufacturing Company located in Metro Detroit. Must have experience with paint, coating or adhesive chemistry / application. Requirements of the Paint Application EngineerRequires 8-12 years of experience.10+ years in paint process/application.Knowledge...
-
Application Engineer
1 day ago
Troy, United States Venteon Full timeVenteon is currently seeking an experienced Paint Application Engineer to fill an opening with a Tier 1 Manufacturing Company located in Metro Detroit. Must have experience with paint, coating or adhesive chemistry / application. Requirements of the Paint Application EngineerRequires 8-12 years of experience.10+ years in paint process/application.Knowledge...
-
Application Engineer
19 hours ago
Troy, United States Venteon Full timeVenteon is currently seeking an experienced Paint Application Engineer to fill an opening with a Tier 1 Manufacturing Company located in Metro Detroit. Must have experience with paint, coating or adhesive chemistry / application. Requirements of the Paint Application EngineerRequires 8-12 years of experience.10+ years in paint process/application.Knowledge...
-
PaintAdhesive Application Engineer
1 week ago
Troy, United States International Automotive Components Full timeGeneral Description: Provide Advance, Product, & Manufacturing engineering feasibility support for new paint/adhesive systems. Develop supplier RFQ's. Recommend appropriate/coating/adhesive technologies, quote, reviews/vetting, sourcing decision, and technical discussions with IAC management & OEM's. Support manufacturing facility Assist IAC plant in...
-
Application Engineer
1 week ago
Troy, United States Freudenberg Group Full timeWorking at Freudenberg: We will wow your world! Responsibilities:Learn a broad range of fundamental sealing applications including static and dynamic seals, and O-rings in addition to new potential opportunities in the eMobility and electrification specialized application areas. Make recommendations for quality improvements from analysis of warranty parts...
-
Application Engineer
3 weeks ago
Troy, United States SCN - Search Consulting Network Full timeMy name is Jessica Birndorf, a Recruiter with SCN (www.SCNteam.com).We are partnering with a top Automation company who is hiring for an Applications Engineer (Mechanical). Company HighlightsThe company has been in business for over 90 yearsToday the company has a network of 16 production plants and 79 Drive Technology Centers in 50 countries around the...
-
Application Engineer
3 weeks ago
Troy, United States SCN - Search Consulting Network Full timeMy name is Jessica Birndorf, a Recruiter with SCN (www.SCNteam.com).We are partnering with a top Automation company who is hiring for an Applications Engineer (Mechanical). Company HighlightsThe company has been in business for over 90 yearsToday the company has a network of 16 production plants and 79 Drive Technology Centers in 50 countries around the...
-
Senior Product Engineer
4 weeks ago
Troy, United States ICONMA Full timeRequirements Knowledge of performance requirements, including structural requirements, FMVSS requirements, occupant safety, and system durability. Proficiency in seals, adhesives, sealers, and closure mechanisms (actuators, hinges, latches). Familiarity with materials and their properties. Understanding of joining strategies and methods. Knowledge of panel...
-
Application Engineering Intern
3 weeks ago
Troy, United States Altair Full timeTransforming the Future with the Convergence of Simulation and Data APPLICATION ENGINEERING INTERN Do you like a challenge, are you a complex thinker who likes to solve problems? If so, then you might be the new Altairian we are searching for. At Altair, your curiosity matters. We pride ourselves on a business culture that enables open, creative thinking,...
-
Software Applications Engineer
1 week ago
Troy, United States LG Energy Solution Michigan, Inc. Full timeTitle: Software Applications Engineer Reports to: Software Development ManagerLocation: Troy, MI LG Energy Solution Michigan Inc. (LGESMI) develops and manufactures large lithium ion polymer batteries and packs for electric vehicle (EV) and energy storage applications. Come join the leader in advanced EV batteries! www.lgenergymi.com Summary: As a software...
-
CNC Application Engineer
4 days ago
Troy, United States CivicMinds, Inc Full timeJob: CNC Application EngineerLocation: Troy, AL Fulltime Direct hireJob SummaryThe CNC Application Engineer will provide a broad Knowledge of cutting tools with the ability to trouble shoot 5 axis milling, multi spindle turning operations & Swiss machining processes. High level of understanding of CAD/CAM software (Master Cam), and hands on experience with...
-
CNC Application Engineer
4 days ago
Troy, United States CivicMinds, Inc Full timeJob: CNC Application EngineerLocation: Troy, AL Fulltime Direct hireJob SummaryThe CNC Application Engineer will provide a broad Knowledge of cutting tools with the ability to trouble shoot 5 axis milling, multi spindle turning operations & Swiss machining processes. High level of understanding of CAD/CAM software (Master Cam), and hands on experience with...
-
CNC Application Engineer
6 days ago
Troy, United States CivicMinds, Inc Full timeJob Summary The CNC Application Engineer will provide a broad Knowledge of cutting tools with the ability to trouble shoot 5 axis milling, multi spindle turning operations & Swiss machining processes. High level of understanding of CAD/CAM software (Master Cam), and hands on experience with G-code & macro programming. This position requires working knowledge...
-
CNC Application Engineer
4 weeks ago
Troy, United States CivicMinds, Inc Full timeJob Summary The CNC Application Engineer will provide a broad Knowledge of cutting tools with the ability to trouble shoot 5 axis milling, multi spindle turning operations & Swiss machining processes. High level of understanding of CAD/CAM software (Master Cam), and hands on experience with G-code & macro programming. This position requires working knowledge...
-
CNC Application Engineer
1 month ago
Troy, United States CivicMinds, Inc Full timeJob SummaryThe CNC Application Engineer will provide a broad Knowledge of cutting tools with the ability to trouble shoot 5 axis milling, multi spindle turning operations & Swiss machining processes. High level of understanding of CAD/CAM software (Master Cam), and hands on experience with G-code & macro programming. This position requires working knowledge...
-
CNC Application Engineer
1 month ago
Troy, United States CivicMinds, Inc Full timeJob SummaryThe CNC Application Engineer will provide a broad Knowledge of cutting tools with the ability to trouble shoot 5 axis milling, multi spindle turning operations & Swiss machining processes. High level of understanding of CAD/CAM software (Master Cam), and hands on experience with G-code & macro programming. This position requires working knowledge...
-
Applications Engineer
4 weeks ago
Troy, United States Path Engineering Full timeJob DescriptionJob DescriptionRoleAs an Applications Engineer / NC Programmer (also known as CNC Programmer, Manufacturing Engineer), you'll be responsible for pre-acceptance, reviewing project documents, creating design plans, drafting project specifications, and conducting NC program reviews. You'll also be involved in installation, customer...
-
Sr. Engineer, SW Applications
4 days ago
Troy, United States LG Energy Solution Michigan, Inc. Full timeTitle: Sr. Software Applications Engineer Reports to: Software Development ManagerLocation: Troy, MI LG Energy Solution Michigan Inc. (LGESMI) develops and manufactures large lithium ion polymer batteries and packs for electric vehicle (EV) and energy storage applications. Come join the leader in advanced EV batteries! www.lgenergymi.com Summary: As a...
-
Applications Engineer CNC Machine Tools
1 month ago
Troy, United States Swift Placement & Consulting Full timeLeading Machine Tool Distributor looking for an experienced Applications Engineer for Mill/Turn and 5-Axis machines. Controls would be for Fanuc, Siemens, and/or Heidenhain for DN Solutions (Doosan) and Heller machines.• Perform application engineering work independently and set priorities with knowledge of company goals. • Design and fabricate fixtures/...