Punch Press Operator I

2 days ago

Chippewa Falls, United States Cadrex Full time
OVERVIEW

Cadrex is searching for a Punch Press Operator I to produce parts from metal using a punch press, a computer numeric controlled (CNC) piece of equipment that makes precision cuts and punches into metal. Punch Operators monitor machines making sure they are working at full capacity, stocked with needed materials, and well-maintained.

KEY RESPONSIBILITIES
  • Measure completed work to verify conformance to specifications, using micrometers, gauges, calipers, templates, and/or rulers.
  • Examine completed work for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws
  • Read work orders/production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances
  • Load work into machine
  • Set-up and start machine, monitor operations, and record operational data
  • Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools
  • Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools
  • Clean and lubricate machines
  • Position, align, and secure work against fixtures or stops on machine beds or on dies
  • Perform periodic checks on output
  • Perform typical machine shop operations; set up and run, de-bur
  • Detect and report defective materials or questionable conditions to management or designer
  • Maintain work area and equipment in a clean orderly condition and follow prescribed safety procedures
  • Perform quality inspection/checks per quality documentation/control plan (including documentation of results)
  • Uphold site efficiency standards
  • Learn and demonstrate continuous improvement for site Safety and Quality standards and procedures
  • Meet the standards of the site attendance policy
  • Assist in other work areas as assigned
Requirements

PREFERRED QUALIFICATIONS
  • Read and comprehend simple instructions, short correspondence, and memos. Write simple correspondence
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
  • Ability to read and interpret prints and work orders
  • Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions
EDUCATION
  • High School diploma
LOCATION
  • Onsite
SCHEDULE
  • Friday - Sunday, 5:45 am to 6:15 pm
WORK ENVIRONMENT
  • While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and vibration. The employee is occasionally exposed to the risk of electrical shock. The noise level in the work environment is usually moderate and occasionally loud.
PHYSICAL DEMANDS
  • While performing the duties of this job, the employee is regularly required to stand, sit, use hands and fingers, handle or feel, and talk or hear. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and ability to adjust focus.
CADREX'S CORE VALUES
  • Safety first, rising to the challenge, collaboration, accountability, and doing the right thing


ABOUT US

CADREX Manufacturing Solutions is a leading provider of complex sheet metal and machined production parts, assemblies, and weldments for a variety of end markets, including electrical transmission and distribution, warehouse automation, technology, aerospace & defense, medical, food, and industrials. With locations in Colorado, Pennsylvania, Illinois, Washington, Wisconsin, Minnesota, Michigan, Indiana, Massachusetts, Oklahoma, and Monterrey Mexico, CADREX offers numerous in-house manufacturing capabilities, including laser cutting, sheet metal fabrication, complex assembly, CNC punching, CNC machining, forming, robotic welding, stamping, fastener insertion, and tool and die manufacturing, to effectively serve customers with lights-out manufacturing capabilities for mid- to high-volume production. For more information, visit www.cadrex.com.

Cadrex provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

  • Assembly Operator I

    7 days ago

    Chippewa Falls, United States Cadrex Full time

    Job Type Full-timeDescriptionOVERVIEWCadrex is searching for an Assembly Operator I to perform tasks related to assembling work in progress (WIP) parts to produce finished goods (FG) through various processes including, but not limited to sonic welding, heat staking, gluing, inserting screws, and other assembly processes to meet customer and ISO standards....

  • 2nd Shift Assembly Operator I

    2 months ago

    Chippewa Falls, United States SEEK CareersStaffing Full time

    Work in Metal Manufacturing as an Assembly Operator. Would you like a set schedule with 3-day weekends each week? Do you enjoy working with tools and your hands? Would you enjoy working for a company with a strong foundation in core values; drive, integrity, growth, respect, innovation? We are presently interviewing for Assembly Operators to work in Chippewa...

  • Press Operations Coordinator

    2 weeks ago

    Menomonee Falls, Wisconsin, United States Quad Full time

    We are looking for an experienced Press Operations Coordinator to join our team at Quad's In-Store facility in West Allis. This role involves setting up and operating large format litho presses, ensuring high-quality prints.Main Responsibilities:Coordinate press setup and operationMaintain press area cleanliness and organizationEssential Requirements:HS...

  • Digital Press Operator

    1 week ago

    Menomonee Falls, United States Quad Full time

    Quad is currently seeking First, Second and Third Shift Digital Press Operators to work in our Quad Instore facility  in West Allis.  The Operator is responsible for producing quality printed sheets, boards, or rolls.   We offer paid relocation help to candidates with prior experience. The job duties for this position include, but are not limited to: ...

  • Digital Press Operator

    3 months ago

    Menomonee falls, United States Quad Full time

    Quad is currently seekingFirst, Second and Third Shift Digital Press Operators to work in our Quad Instorefacility in West Allis. The Operator is responsible for producing quality printed sheets, boards, or rolls. We offer paid relocation help to candidates with prior experience.The job duties for this position include, but are not limited to: Operate and...

  • Sheetfed First Press Operator

    3 months ago

    Menomonee falls, United States Quad Full time

    Quad is currently seeking 1st and 2nd shiftSheetfed Press Operator to work in our In-Store facility in West Allis. Press Feeder is responsible for set up and operation of large format litho press infeed.Job duties include, but are not limited to: Setup and operation of press feeder General housekeeping and maintenance of the pressQualifications HS Diploma or...

  • Sheetfed First Press Operator

    3 weeks ago

    Menomonee Falls, United States Quad Full time

    Quad is currently seeking 1st and 2nd shiftSheetfed Press Operator to work in our In-Store facility in West Allis. Press Feeder is responsible for set up and operation of large format litho press infeed.Job duties include, but are not limited to: Setup and operation of press feeder General housekeeping and maintenance of the pressQualifications HS Diploma or...

  • Sheetfed First Press Operator

    3 months ago

    Menomonee Falls, United States Quad Full time

    Quad is currently seeking 1st and 2nd shiftSheetfed Press Operator to work in our In-Store facility in West Allis. Press Feeder is responsible for set up and operation of large format litho press infeed. Job duties include, but are not limited to: Setup and operation of press feeder General housekeeping and maintenance of the press Qualifications HS...

  • Digital Press Operator

    3 weeks ago

    Menomonee Falls, WI, United States Quad Full time

    Quad is currently seekingFirst, Second and Third Shift Digital Press Operators to work in our Quad Instorefacility in West Allis. The Operator is responsible for producing quality printed sheets, boards, or rolls. We offer paid relocation help to candidates with prior experience.The job duties for this position include, but are not limited to: Operate and...

  • Printing Press Operator

    3 months ago

    Menomonee Falls, United States The Scan Group Full time

    Job DescriptionJob Description****This job is located in Waukesha, WI and is onsite 1st Shift Monday-Friday****We are seeking a skilled and detail-oriented Offset Printing Press Operator to join our team. The successful candidate will be responsible for operating primarily our Heidelberg CD 74 press to produce high-quality finished printing for our clients....

  • Sheetfed First Press Operator

    3 weeks ago

    Menomonee Falls, WI, United States Quad Full time

    Quad is currently seeking 1st and 2nd shiftSheetfed Press Operator to work in our In-Store facility in West Allis. Press Feeder is responsible for set up and operation of large format litho press infeed.Job duties include, but are not limited to: Setup and operation of press feeder General housekeeping and maintenance of the pressQualifications HS Diploma or...

  • Assembly Operator Technician

    12 hours ago

    Chippewa Falls, Wisconsin, United States SEEK CareersStaffing Full time

    Work with UsAssembly Operator Job DescriptionWe are looking for an Assembly Operator to join our team in Chippewa Falls, WI. As an Assembly Operator, you will be responsible for assembling work-in-progress parts into finished products using various methods such as sonic welding, heat staking, and gluing.Inspect, label, mill, route, punch, sand, assemble, and...

  • Print Press Operator

    2 weeks ago

    Idaho Falls, Idaho, United States Volm Companies Full time

    Job OverviewWe are seeking an experienced Print Press Operator to join our team at Volm Companies.The successful candidate will be responsible for setting up, operating, and maintaining flexographic printing presses to ensure high-quality production.

  • Sheetfed Press Assistant

    1 week ago

    Menomonee falls, United States Disability Solutions Full time

    Quad is currently seeking 1st and 2nd Shift Large Format Sheetfed Press Feeders to work in our In-Store facility in West Allis. The Press Feeder is responsible for the setup and operation of large format litho press infeed.Job duties include, but are not limited to: Setup and operation of press feeder. Assisting press operators. General housekeeping and...

  • Sheetfed Press Specialist

    3 days ago

    Menomonee Falls, Wisconsin, United States Quad Full time

    Job Title: Sheetfed Press SpecialistWe are seeking an experienced Sheetfed Press Specialist to join our team at Quad in West Allis. As a key member of our In-Store facility, you will be responsible for setting up and operating large format litho presses.The ideal candidate will have strong math skills, knowledge of simple computer operations, and the ability...

  • Sheetfed Press Assistant

    3 months ago

    Menomonee Falls, WI, United States Quad Full time

    Quad is currently seeking 1st and 2nd Shift Large Format Sheetfed Press Feeders to work in our In-Store facility in West Allis. The Press Feeder is responsible for the setup and operation of large format litho press infeed. Job duties include, but are not limited to: Setup and operation of press feeder. Assisting press operators. General housekeeping and...

  • Sheetfed Press Assistant

    3 weeks ago

    Menomonee Falls, WI, United States Quad Full time

    Quad is currently seeking 1st and 2nd Shift Large Format Sheetfed Press Feeders to work in our In-Store facility in West Allis. The Press Feeder is responsible for the setup and operation of large format litho press infeed.Job duties include, but are not limited to: Setup and operation of press feeder. Assisting press operators. General housekeeping and...

  • Printing Press Specialist

    3 weeks ago

    Tinton Falls, New Jersey, United States Onsite Personnel LLC Full time

    Job OverviewWe are seeking a skilled Printing Press Specialist to join our team at Onsite Personnel LLC. As a key member of our production team, you will be responsible for operating high-speed printing presses and ensuring the highest quality output.About the JobThis is a full-time position working 8 hours per shift, primarily during evening hours (6 PM –...

  • Large Format Press Specialist

    3 days ago

    Menomonee Falls, Wisconsin, United States Quad Full time

    We are Quad, a renowned manufacturer looking for a talented Large Format Press Specialist to join our team in West Allis. As a key member, you will be responsible for setting up and operating complex printing equipment.Your main duties will include:Operating and maintaining large format litho pressesSourcing and managing press suppliesWe offer a generous...

  • Machine Operator

    1 week ago

    Wichita Falls, Texas, United States Johnson Controls Full time

    We are seeking a skilled Machine Operator to join our team at our Wichita, KS manufacturing facility. This is a fantastic opportunity to develop your skills and contribute to the success of our company.About the RoleAs a Machine Operator, you will be responsible for safely and efficiently operating various manufacturing equipment, including inspection and...