6H6PI4-Equipment & Tool Engineer 4 - 68A-Asset Engineering
4 weeks ago
Indotronix is seeking a Onsite Job - Equipment & Tool Engineer / Production Asset Engineer Level 4 for a Job Opportunity in Everett,Washington
Job Description :
Seeking a Production Asset Engineer to support the Electrical Systems Responsibility Center (ESRC) in Everett Washington.
A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency.
They will also have a strong desire to be out in the factory, interacting with mechanics, safety, equipment services, and directly supporting the production system. In Production Engineering, we need highly responsible professionals committed to upholding the highest standards of safety, quality, and integrity.
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System.
Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products.
Leads the creation and modification of equipment and tooling definition at the program level.
Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets.
Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
Leads gated reviews and develops plans for production readiness, preventative maintenance and spares.
Validates contractual performance milestones.
Develops and implements work-arounds and maintains configuration of hardware, software and documentation.
Conducts studies and make recommendation for disposition of assets
A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency.
They will also have a strong desire to be out in the factory, interacting with mechanics, safety, equipment services, and directly supporting the production system. In Production Engineering, we need highly responsible professionals committed to upholding the highest standards of safety, quality, and integrity.
In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
Primary responsibilities:
Investigates and develops basic to moderately complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
Participates in design reviews, collects design requirements, creates and revises drawings and models to support the build plan.
Creates specifications, purchase requests and usage instructions for equipment and tooling.
Self-checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and supports user training development.
Researches designs to create and revise usage instructions. Provides technical support for engineering changes and discrepancies by investigating problems, and analyzing data to identify solutions.
Maintains hardware and software configuration. Supports the disposition of equipment and tooling.
Required Skill Set :
Minimum 7 years of experience working in an engineering discipline
Minimum 7 years of experience with production systems in a manufacturing or engineering capacity
Desired Skills Set :
Must be a motivated leader/self-starter.
Knowledge of various manufacturing techniques
Experience working in an Equipment or Tooling Engineer role
Experience working in a production environment
CATIA or equivalent solid modeling experience
Experience with programming, integrating or troubleshooting industrial controls from OEMs.
Experience using basic Microsoft Office and office computing systems
Experience in Automation and robotics
Ability to learn in a fast paced environment
Ability to collaborate with both the engineering work force and the mechanics on the factory floor
Project management knowledge
Strong communication skills
Education Qualification :
Bachelor, Master, or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry. AClient is a preferred, although not required, accreditation standard.
Experienced Level: Bachelor's degree and typically 9 or more years' experience in an engineering classification or a Master's degree with typically 7 or more years' experience in an engineering classification or Ph.D. degree with 4 or more years' experience in an engineering classification
Indotronix is an Equal Opportunity Employer
-
Everett, United States Indotronix International Corporation Full timeIndotronix is seeking a Onsite Job - Equipment & Tool Engineer / Production Asset Engineer Level 4 for a Job Opportunity in Everett,Washington Job Description : Seeking a Production Asset Engineer to support the Electrical Systems Responsibility Center (ESRC) in Everett Washington. A successful candidate in this role will have passion, creativity, and an...
-
Everett, Washington, United States LanceSoft Full timeJob Description: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system...
-
Everett, Washington, United States LanceSoft Full timeJob Description: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system...
-
Everett, Washington, United States Saxon Global Full timeJob Description: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system...
-
Everett, United States LanceSoft Full timeJob Description: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system...
-
Equipment & Tool Engineer 4
2 weeks ago
Everett, Washington, United States ICONMA Full timeEquipment & Tool Engineer 4 Location: Everett, WADuration: 12 MonthsDescription:Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or...
-
Equipment & Tool Engineer 4
4 weeks ago
Everett, United States US Tech Solutions Full timeJob Description: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system...
-
Equipment & Tool Engineer 4
4 weeks ago
Everett, United States US Tech Solutions Full timeJob Description: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system...
-
Equipment and Tool Engineer 4
2 weeks ago
Everett, Washington, United States PDS Tech Full timeAre you looking for a new opportunity? Come join out team PDS Tech is hiring for a Tooling Engineer in Everett, WAJob Title:Equipment & Tool Engineer 4 Job Type: Full time; Contract ( 12 months)Location: Everett , WA 98204 Schedule: Monday to Fr Equipment, Engineer, Technical Support, Automotive, Staffing, Design
-
Equipment & Tool Engineer 4
2 weeks ago
Everett, United States Dexian Full timeJob Summary:Dexian is seeking a Equipment & Tool Engineer 4 for an opportunity with a client located in Everett, WA.Responsibilities:Investigates and develops basic to moderately complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirementsParticipates in design reviews, collects design requirements,...
-
Equipment and Tool Engineer 4
2 weeks ago
Everett, Washington, United States PDS Tech Commercial, Inc. Full timeAre you looking for a new opportunity? Come join out team PDS Tech is hiring for a Tooling Engineer in Everett, WA. Job Title: Equipment & Tool Engineer 4 Job Type: Full time; Contract( 12 months) Location: Everett , WA 98204 Schedule: Monday to Friday; Shifts: 1st shift 7:00 am - 3:30 pm Pay Rate: $65 to $75 per hour Investigates and develops basic to...
-
Equipment & Tool Engineer 4
4 weeks ago
Everett, United States Artech Full timeJob Description: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system...
-
Equipment and Tool Engineer 4
2 weeks ago
Everett, Washington, United States PDS Tech Commercial Full timeJob DescriptionJob DescriptionAre you looking for a new opportunity? Come join out team PDS Tech is hiring for a Tooling Engineer in Everett, WA.Job Title: Equipment & Tool Engineer 4Job Type: Full time; Contract( 12 months)Location: Everett , WA 98204Schedule: Monday to Friday; Shifts: 1st shift 7:00 am - 3:30 pmPay Rate: 65 to 75 per hour Investigates and...
-
Equipment and Tool Engineer
4 weeks ago
Everett, United States Spectraforce Technologies Full timeJob title: Equipment & Tool Engineer 4 Duration: 12 Months Location: Everett, WA Shift timings: 1st shift 7:00 am - 3:30 pmResponsibilities: Develops program and project requirements, develops highly complex equipment and tooling concepts, and designs solutions, including alternatives for the Production System. Validates analysis of technical data...
-
Equipment & Tool Engineer
7 days ago
Everett, United States Saxon Global Full timeOnly USC/GC required. Job Description: Equipment & Tool EngineerDuration: 12 Months Location: Everett, WAResponsibilities: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product...
-
Equipment & Tool Engineer
7 days ago
Everett, United States Saxon Global Full timeOnly USC/GC required. Job Description: Equipment & Tool EngineerDuration: 12 Months Location: Everett, WAResponsibilities: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product...
-
Equipment or Tool Engineer
2 weeks ago
Everett, Washington, United States ICONMA Full timeEquipment or Tool Engineer Location: Everett, WADuration: 12 months with Possible ExtensionDescription: A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency. They will also have a strong desire to be out in the factory, interacting with mechanics, safety, and equipment services,...
-
Equipment or Tool Engineer
2 weeks ago
Everett, United States ICONMA Full timeEquipment or Tool Engineer Location: Everett, WA Duration: 12 months with Possible Extension Description: A successful candidate in this role will have passion, creativity, and an insatiable desire for process improvement and efficiency. They will also have a strong desire to be out in the factory, interacting with mechanics, safety, and equipment...
-
Equipment & Tool Engineer
6 days ago
Everett, United States Kronos Consulting Full timeJob DescriptionJob DescriptionDescription:Kronos has a long history of avionics engineering working with some of the largest aircraft integrators in the world. We always provide our partners with 100% customer satisfaction and on-time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have...
-
Equipment and Tool Engineer
2 days ago
Everett, United States Take2 Consulting, LLC Full timeJob Description:Our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you!Each day, you'll work alongside experts in production, quality, design, and supply chain roles to guide aircraft from design to...
