Manufacturing Engineer

1 week ago

Winchester, United States NESCO Inc Full time
JOB SUMMARY:
Supports the Business and Department Action Plan objectives with focus on Production support activities, planning scrap reduction, part quality improvements, streamline Client, and indirect material cost reductions. Responsible for new and revised product/process implementation activities. Investigates and introduces new technologies into the business. Communicates directly with and supports customer and supplier technical request activities. Provides technical support to other departments as needed. Promotes a positive attitude toward teamwork, safety, and quality service. Generally, working time is divided approximately 60% floor to 40% office work.

ESSENTIAL FUNCTIONS:
  • Support Production operation by troubleshooting and resolving machine and process problems as they develop such as, but not limited to; chip control, machine crash recovery, stability, capability, short stoppages, and recurring machine operation problems.
  • Create and improve training and standardization of operations such as, but not limited to; operator control panel interfacing, measurements, machine offsets, tool changes, resetting alarms, and coolant maintenance.
  • Identify and implement kaizen improvements such as, but not limited to; short stop reduction, cause and effect identification/solution, fatigue reduction, single piece flow, and pokayoke operations.
  • Uses statistical methods to understand process variability, capability, and drive process improvements as well as developing contingency plans for capacity/productivity changes.
  • Responsible for the management of documentation such as, but not limited to; SOPs, control plans, FMEAs, forms, check-sheets, inspection records, engineering drawings, etc.
  • Supports Business and Department Action Plan objectives with focus on scrap reduction, streamline Client, and cost reductions.
  • Support customer and internal quality concern counter measure activities (root-cause-corrective-actions).
  • Demonstrates ability to resolve problems systematically using appropriate problem-solving tools and techniques such as but not limited to; 5-Why, 8-D, D.O.E., capability studies, etc.
  • Leads investigations and make recommendations for cost reduction activities related to man, machine, methods, and materials.
  • Applies Lean Manufacturing philosophies such as but not limited to; value stream maps, Standardized work, JIT, PDCA, SMED, 5S, SPC, etc.
  • Collects and interprets engineering data such as, but not limited to; machine cycle time, motion analysis, capacity planning, tooling design, ergonomics, process layout, cost reduction, etc.
  • Selects tools and consumable materials necessary for cost and time efficient manufacturing.
  • Work with vendors to determine product specifications, support arranging the purchase of equipment, materials, or parts, and evaluating products according to specifications and quality standards.
  • Selects machine consumable parts for proper maintenance of the equipment.
  • Supports plant activities to achieve customer awards and quality registrations such as but not limited to; IATF16949, ISO 14001, etc.
  • Responsible for preparing capital requests and synchronizing site functions through all phases of process improvements including new assets. Ensures compliance to scope, cost and schedule.
  • Supports activities centered on new product launches, technical problem solving, process improvement, and resolving engineering design and quality challenges.
  • Specifies facility and/or processes to meet any mandated regulations such as but not limited to; OSHA, NFPA, etc.
  • May be required to assist the off shifts with any processing problems that may arise.
  • Supports the Quality department in the design of gauges and fixtures.
Skills/Experience:
QUALIFICATIONS: (TRAINING, EXPERIENCE AND EDUCATION)
  • Bachelor's degree in Engineering, Engineering Technology, or a minimum 10 years experience in manufacturing engineering role required, or a combination of education and experience.
  • Computer literate in MS Office software (Word, Excel, and Access).
  • Experienced user of AutoCAD or equivalent.
  • Able to interpret product drawings and to make tool and fixture drawings.
  • Excellent verbal and written communication as well as analytical skills.
  • PLC and HMI control system knowledge preferred.
  • Experience with CNC machine tool programming and/or Fanuc robot programming.
Required Skills:
Experience with CNC machine tool programming and/or Fanuc robot programming Desired Skills: Degree Requirements:
Bachelor's degree in Engineering, Engineering Technology, or a minimum 10 years experience in manufacturing engineering role required, or a combination of education and experience.

Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

  • Manufacturing Tooling Engineer

    1 month ago

    Winchester, Virginia, United States IWT Primary Manufacturing Plant Full time

    Overview Infiltrator Water Technologies (IWT) is a market leader within the onsite wastewater treatment industry, Infiltrator manufactures a variety of revolutionary products and innovative, environmentally friendly alternatives to traditional stone and pipe leachfield and concrete septic wastewater system components. IWT is a wholly owned subsidiary of...

  • Manufacturing Tooling Engineer

    4 weeks ago

    Winchester, Virginia, United States IWT Primary Manufacturing Plant Full time

    Overview Infiltrator Water Technologies (IWT) is a market leader within the onsite wastewater treatment industry, Infiltrator manufactures a variety of revolutionary products and innovative, environmentally friendly alternatives to traditional stone and pipe leachfield and concrete septic wastewater system components. IWT is a wholly owned subsidiary of...

  • Manufacturing Tooling Engineer

    4 weeks ago

    Winchester, United States Infiltrator Systems Full time

    Overview: Infiltrator Water Technologies (IWT) is a market leader within the onsite wastewater treatment industry, Infiltrator manufactures a variety of revolutionary products and innovative, environmentally friendly alternatives to traditional stone and pipe leachfield and concrete septic wastewater system components. IWT is a wholly owned subsidiary of...

  • Manufacturing Engineer

    1 week ago

    Winchester, United States PEAK Technical Staffing USA Full time

    Manufacturing Engineer Direct HireWinchester, KY 40391Hours: Monday - Friday, 8:00am - 4:30pmRequired experience:CNC machinePart Print and Tooling Jigs and Fixtures for CNC Machine SUMMARY:Supports Business and Department Action Plan objectives, focusing on production support activities, scrap reduction, part quality improvements, and cost...

  • Manufacturing Engineer Co-op

    2 weeks ago

    Winchester, United States Guardian Agriculture Full time

    About Us:Guardian Agriculture develops large multicopters for applying agricultural chemicals to high-value crops. Our systems radically improve precision and safety relative to existing plane- and helicopter-based crop spraying solutions, while reducing chemical use, reducing impact on pollinating insects, and minimizing opportunities for organisms to...

  • Manufacturing Engineer

    1 week ago

    Winchester, United States PEAK Technical Staffing USA Full time

    Manufacturing Engineer Direct Hire Winchester, KY 40391 Hours: Monday - Friday, 8:00am - 4:30pm Required experience: CNC machine Part Print and Tooling Jigs and Fixtures for CNC Machine SUMMARY: Supports Business and Department Action Plan objectives, focusing on production support activities, scrap reduction, part quality improvements, and cost reductions....

  • Manufacturing Engineer

    3 weeks ago

    Winchester, United States PEAK Technical Staffing USA Full time

    P-DPD-001 Manufacturing Engineer Direct Hire Winchester, KY 40391 Hours: Monday - Friday, 8:00am - 4:30pm Required experience: CNC machine Part Print and Tooling Jigs and Fixtures for CNC Machine SUMMARY: Supports Business and Department Action Plan objectives, focusing on production support activities, scrap reduction, part quality improvements, and cost...

  • Manufacturing Engineer Co-op

    3 weeks ago

    Winchester, United States Guardian Agriculture Full time

    About Us: Guardian Agriculture develops large multicopters for applying agricultural chemicals to high-value crops. Our systems radically improve precision and safety relative to existing plane- and helicopter-based crop spraying solutions, while reducing chemical use, reducing impact on pollinating insects, and minimizing opportunities for organisms to...

  • Manufacturing Engineer

    4 weeks ago

    Winchester, United States PEAK Technical Staffing USA Full time

    Hours: Monday - Friday, 8:00am - 4:30pm SUMMARY: Supports Business and Department Action Plan objectives, focusing on production support activities, scrap reduction, part quality improvements, and cost reductions. Responsible for implementing new and revised product/processes, introducing new technologies, and providing technical support. Promotes teamwork,...

  • Manufacturing Tooling Engineer

    4 weeks ago

    Winchester, United States Actalent Full time

    Description: - Lead mold maintenance and development for all product lines. - Continuous Improvement by researching new technology for improvements to product, molds, materials, and manufacturing. - Work with vendors to improve molds and mold maintenance. - Work with engineering to make sure new and existing product and tool designs are moldable. - Suggest...

  • Controls Engineer

    1 month ago

    Winchester, Virginia, United States IWT Primary Manufacturing Plant Full time

    Overview Infiltrator Water Technologies (IWT) is a market leader within the onsite wastewater treatment industry, Infiltrator manufactures a variety of revolutionary products and innovative, environmentally friendly alternatives to traditional stone and pipe leachfield and concrete septic wastewater system components. IWT is a wholly owned subsidiary of...

  • Controls Engineer

    4 weeks ago

    Winchester, Virginia, United States IWT Primary Manufacturing Plant Full time

    Overview Infiltrator Water Technologies (IWT) is a market leader within the onsite wastewater treatment industry, Infiltrator manufactures a variety of revolutionary products and innovative, environmentally friendly alternatives to traditional stone and pipe leachfield and concrete septic wastewater system components. IWT is a wholly owned subsidiary of...

  • Manufacturing Tech

    4 weeks ago

    Winchester, United States Augmentation Full time

    Job DescriptionJob Description3rd Shift Opening: 1045PM – 7AM S-Th (overtime & weekends as production needs)We require a high school diploma or equivalent – them to pass a drug screen (including THC) and a background check (all which you perform within our rate). All of our techs are manufacturing technicians – they will work on our production floor...

  • Manufacturing Tech

    1 month ago

    Winchester, United States Augmentation Full time

    Job DescriptionJob Description3rd Shift Opening: 1045PM – 7AM S-Th (overtime & weekends as production needs)We require a high school diploma or equivalent – them to pass a drug screen (including THC) and a background check (all which you perform within our rate). All of our techs are manufacturing technicians – they will work on our production floor...

  • Director of Manufacturing Automation

    2 weeks ago

    Winchester, United States American Woodmark Full time

    American Woodmark is one of the nation's largest cabinet manufacturers. By partnering with major home centers, builders, and dealers, we spark the imagination of homeowners and designer and bring their vision to life. Across our service and distribution centers, our corporate office and manufacturing facilities, you'll always find the same commitment to...

  • Plant Engineer

    4 days ago

    Winchester, United States 8th Ave Food & Provisions Full time

    Business Unit Description: 8th Avenue Food & Provisions is a growing organization made up of businesses that produce and sell quality products including pasta, peanut butter, granola, and fruit and nut trail mixes to retail, foodservice and ingredient customers. The company was formed in October 2018 through a combination of Post Holdings private brands...

  • Plant Engineer

    4 weeks ago

    Winchester, United States Thinksoft Technologies LLC Full time

    Job DescriptionJob DescriptionPosition Title: Plant EngineerLocation: Winchester, KYPosition Type: PermanentPay Rate: $104,850.00 per yr. on W2Must-Haves1.) Experience in running a manufacturing maintenance department.2.) Engineering degree; Mechanical; chemical or industrial engineering.3.) Experience & proven record of coming up with failure...

  • Plant Engineer

    1 month ago

    Winchester, United States Thinksoft Technologies LLC Full time

    Job DescriptionJob DescriptionPosition Title: Plant EngineerLocation: Winchester, KYPosition Type: PermanentPay Rate: $104,850.00 per yr. on W2Must-Haves1.) Experience in running a manufacturing maintenance department.2.) Engineering degree; Mechanical; chemical or industrial engineering.3.) Experience & proven record of coming up with failure...

  • Controls Engineer

    1 week ago

    Winchester, United States Trex Company Full time

    When you work at Trex, you're helping to grow and enhance a true original. You join a company that boldly launched an entire industry... and still leads the way.We are looking for a Controls Engineer to help us by providing design and support for instrumentation, PLC controls, and a variable frequency that drives all production lines. As a Trex Controls...

  • Engineering Intern

    2 weeks ago

    Winchester, Virginia, United States 8th Avenue Food & Provisions Full time

    Business Unit Overview8th Avenue Food & Provisions is a growing organization made up of businesses that produce and sell quality products including pasta, peanut butter, granola, and fruit and nut trail mixes to retail, foodservice and ingredient customers. The company was formed in October 2018 through a combination of Post Holdings' private brands...