Die Setter
4 weeks ago
Job Type Full-timeDescriptionESSENTIAL DUTIES AND RESPONSIBILITIESOther duties may be assigned.Demonstrate ability to recognize and explain the function (including controls, mechanical devices, tooling components and auxiliaries) of the type of presses found in the facility.Demonstrate an expert working knowledge of material/part conformance standards and basis SPC recording techniques.Demonstrate leadership qualities and communication skills.Foster an environment of continuous learning and process improvement.Understand basic principles of machining, electricity/electronics, mechanical technology, metallurgy, material handling, and/or power systems.Demonstrate ability to maintain a clean and orderly work area in compliance with facility housekeeping policies.Demonstrate ability to use prints, charts, technical drawings, and/or schematics.Perform basic corrective or preventive maintenance.Must be able to recognize equipment problems and adverse material conditions.Demonstrate an expert understanding of metal stamping processes and auxiliaries such as coil-fed, manual feed, coining operations, embossing, forming, blanking, piercing, and/or drawing.Show familiarity in the use of calipers, micrometers, scales/tape measure, verniers, squares, speciality gages, protractor, sight gages, attribute and fixture gages.Be able to inspect and prepare work station.Prepare die for installation.Set-up press and install die. Request and verify raw material/stock.Prepair and adjust uncoiler (coil fed only).Prepare and adjust straightener (coil fed only).Prepare and adjust feeder.Start, stop and restart equipment.Make a quality piece part.Produce parts (operate equipment).Be familiar with all safety features and requirements for the safe operation of equipment/machinery.Understands and enforces all safety rules and environmental procedures in plant. RequirementsQUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.CERTIFICATES, LICENSES, REGISTRATIONS Fork Lift operators license.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, and risk of electrical shock. The noise level in the work environment is usually loud. Salary Description $23-$24/hour depending on experience
We have other current jobs related to this field that you can find below
-
Die Setter 1st Shift
1 month ago
Auburn Hills, United States US Farathane Full timeUS Farathane is seeking an experienced Die Setter. The Die Setter is directly responsible for the machine set-ups including primary and secondary equipment both scheduled and unscheduled. This role is on 1st shift which runs 7:00am - 3:00pm US Farathane has been a leading source of plastics manufacturing, supplying the automotive industry for over...
-
Die Setter 1st Shift
3 weeks ago
Auburn Hills, United States US Farathane Full timeUS Farathane is seeking an experienced Die Setter. The Die Setter is directly responsible for the machine set-ups including primary and secondary equipment both scheduled and unscheduled. This role is on 1st shift which runs 7:00am - 3:00pm US Farathane has been a leading source of plastics manufacturing, supplying the automotive industry for over...
-
Die Setter
4 weeks ago
Auburn Hills, United States Branex Group Full timeJob DescriptionJob DescriptionEssential Functions:· Include the following. Must be able to do full rotation. Other duties may be assigned.· Change molds in presses for production or sample requirements in a safe, neat, efficient manner (including proper PPE when required). · Must be able to change 6 molds part to part within 8-hour shift.· Prior to...
-
Die Setter
3 weeks ago
Auburn Hills, United States Branex Group Full timeJob DescriptionJob DescriptionEssential Functions:· Include the following. Must be able to do full rotation. Other duties may be assigned.· Change molds in presses for production or sample requirements in a safe, neat, efficient manner (including proper PPE when required). · Must be able to change 6 molds part to part within 8-hour shift.· Prior to...
-
2nd shift Die Setter
4 days ago
Auburn Hills, United States Venteon Full timeWe are currently searching for a 2nd Shift Die Setter for a contract-to-direct opportunity in Auburn Hills, MI. This is a 2nd Shift position Monday-Friday with some Saturday's required depending upon the workload. Responsibilities and Job Duties: Perform setup of the injection molding machines, including dies, settings, chiller, Thermolators, hot...
-
Die Setter
2 weeks ago
Auburn, United States Autokiniton Full time**Die Setter - 3**rd** Shift (10p-630a)** **We are AUTOKINITON (pronounced auto-ken-i-**_TAHN_**)** AUTOKINITON delivers operational excellence, high-quality execution, and customer service. We offer 100% vertical integration capabilities such as end-to-end engineering, manufacturing, and in-house logistics. We’re proud of our Tier 1 supplier legacy for...
-
Mold Setter
2 months ago
Rochester Hills, United States Spark Talent Inc Full timeJob DescriptionJob DescriptionJob Title: Mold Setter (Direct Hire)About the job: Responsible for performing set ups of multi-cavity and multi-shot injection molds. When necessary, assists other team members on the production floor with machine startups.Roles and responsibilities Comply with all internal and OSHA required safety procedures and regulations....
-
Mold Setter
3 weeks ago
Rochester Hills, United States Spark Talent Inc Full timeJob DescriptionJob DescriptionJob Title: Mold Setter (Direct Hire)About the job: Responsible for performing set ups of multi-cavity and multi-shot injection molds. When necessary, assists other team members on the production floor with machine startups.Roles and responsibilities Comply with all internal and OSHA required safety procedures and regulations....
-
Process Technician-2nd Shift
7 days ago
Auburn Hills, Michigan, United States US Farathane Full timeUS Farathane is seeking an experienced Process Technician for 2nd shift at our Auburn Hills facility . This position is directly responsible for ensuring that all machines are running and all processes are in control and running to standard at all times. US Farathane has been a leading source of plastics manufacturing, supplying the automotive industry for...
-
Process Technician-2nd Shift
1 week ago
Auburn Hills, United States US Farathane Full timeUS Farathane is seeking an experienced Process Technician for 2nd shift at our Auburn Hills facility . This position is directly responsible for ensuring that all machines are running and all processes are in control and running to standard at all times. US Farathane has been a leading source of plastics manufacturing, supplying the automotive...
