Lathe Operator

3 weeks ago

Canton, United States Snelling Full time
THIS IS A DIRECT HIRE OPPORTUNITY

Summary Job Description:

Responsible for running lathe machines. This involves tasks related to set-up, machine
operation, and disposing of chips as required.

Tools and Equipment: lathes, variety of cutters and hand tools, chip pushers, steady rests, cranes, shovels, scale, tape
measure, and brooms. This list is not all inclusive.

Job Functions and Functional Job Task Elements

Task 1 : Lathe Operation
  • Responsible for turning necks, facing, centering, etc -finishing lathe-smaller finer cuts-customer centers, etc.
  • An overhead crane is used on these machines to set rolls and take out chip boxes.
  • The employee can hook up the chain for the chip box, by squatting to the level of the chain and not having to lift it to place it on the crane hook.
  • Finishing Lathe- the employee needs to make an average of 4 tools changes per shift on this machine. Based on the design of the machine, the tool change is made between knee and waist level, and some have easier leverage than others. They weigh between 10-40#s and are handled on an infrequent basis per hour.
  • Once set-up is completed, the employee runs the machine using automatic controls between waist and chest level with minimal coordination of bilateral hands.
  • When the machine is running, the employee is only required to supervise the operation and dislodge chips on an occasional to frequent basis per hour.
  • Chips are pushed by climbing on 2 steps and using a chip pusher to dislodge the chips while using a partial squatting motion in the standing position.
  • Chips can also be pushed from a vertical position at ground level and this mostly involves using bilateral arms.
  • Some lathes do not have hydraulics to move the rolls on the machine.
  • The rolls have to be locked or unlocked from their location by using a variety of cranks, wrenches, etc.
  • This involves increased use of bilateral upper extremities with twisting of the trunk. Need to be able to push and pull with at least 50#s of force to use the tools.
  • To apply drivers to roll may be required to lift up to 90# waist level to neck of roll several times each month.
  • Rough Lathe-needs to be able to lift a 50# tool without a jib crane and place it at 28 inches off the floor from the left side and make sure it fits in the slot for the tool.
  • There is only a space of 2 feet on the side of the insert, so that the employee would not be able to stand in front of it and perform this task.
  • Also need to be able to handle a chip pusher that is 10 feet and 8 inches long and weighs 15# on an occasional to frequent basis per hour.
  • Need to be able to push chips that are approximately 12 feet away.
  • Dual Compound -the cutters on this machine need to be mounted twice the number of times as a regular lathe as they cut from both ends.
  • The parts are mounted sideways from the right and the left.
  • On one side the part is mounted 25 inches off the floor from approximately 2 feet away and from 6 inches away on the other side.
  • Do not need to use a chip pusher on this machine as they move into the underground bin by themselves, but the employee needs to be able to use a broom to knock them down with minimal force on an infrequent to occasional basis per hour.

Shift: 8 hours regular shifts and 12 hours over-time shifts

Breaks: 30 minute lunch.

Flooring: Cement, wooden platforms, grates, rubber mats.

Environment: Machine shop environment. Need to be careful with other employees while moving overhead cranes in the
vicinity.

Safety Equipment: Hard hat, gloves, safety glasses, and steel-toe shoes.

Strength Range: Medium-Heavy strength range.

*Benefits include; 401K, Insurance plan w/ Drug, Vision, and Dental, Life Insurance, (11) paid Holidays, Vacation time after 720 hours of service, and more

LOCATION
Canton, Ohio
PAY
$25

  • CNC Operator

    4 weeks ago

    Canton, United States Spark Talent Inc Full time

    Job DescriptionJob DescriptionCNC Machine Operator About Spark Talent Acquisition:Spark Talent Acquisition is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying top talent can be challenging. For us to maximize successful...

  • Machinist Machine Operator

    3 months ago

    Canton, United States International Machine Tool & Full time

    Job DescriptionJob DescriptionTo perform machining center operations as assigned by supervisor.Responsibilities:Setup machineSetup and change toolingInspection of own workmanshipPerform preventative maintenance on machineClean machine and surrounding areaNotify immediate supervisor of machine problemsFilling out time cards correctlySkills:Must be able to...

  • Machinist Machine Operator

    4 weeks ago

    Canton, United States International Machine Tool & Full time

    Job DescriptionJob DescriptionTo perform machining center operations as assigned by supervisor.Responsibilities:Setup machineSetup and change toolingInspection of own workmanshipPerform preventative maintenance on machineClean machine and surrounding areaNotify immediate supervisor of machine problemsFilling out time cards correctlySkills:Must be able to...

  • Machinist Machine Operator

    4 weeks ago

    Canton, United States International Machine Tool & Full time

    Job DescriptionJob DescriptionTo perform machining center operations as assigned by supervisor.Responsibilities:Setup machineSetup and change toolingInspection of own workmanshipPerform preventative maintenance on machineClean machine and surrounding areaNotify immediate supervisor of machine problemsFilling out time cards correctlySkills:Must be able to...

  • Cnc Machinist

    4 weeks ago

    Canton, United States Aerotek Full time

    **Description:**CNC Machinist | 1st shift (7a-3p) | $25-$35/HR | Canton, OH+ Operate, Set up and Program CNC Machines to manufacture coponents+ Run 4-Axis mills and Manual Lathes: Use ProtoTrak equipment+ Machine various metals such as copper, brass and stainless+ Conversational Programming+ Use G&M code with CAM Software+ Read Blueprints+ Use Precision...

  • Cnc Machinist

    2 weeks ago

    Canton, United States Aerotek Full time

    Description:CNC Machinist | 1st shift (7a-3p) | $25-$35/HR | Canton, OH+ Operate, Set up and Program CNC Machines to manufacture coponents+ Run 4-Axis mills and Manual Lathes: Use ProtoTrak equipment+ Machine various metals such as copper, brass and stainless+ Conversational Programming+ Use G&M code with CAM Software+ Read Blueprints+ Use Precision...

  • Cnc Machinist

    1 month ago

    Canton, United States Aerotek Full time

    CNC Machinist | 1st shift (7a-3p) | $25-$35/HR | Canton, OH **Description:** - Operate, Set up and Program CNC Machines to manufacture coponents - Run 4-Axis mills and Manual Lathes: Use ProtoTrak equipment - Machine various metals such as copper, brass and stainless - Conversational Programming - Use G&M code with CAM Software - Read Blueprints - Use...

  • Cnc Machinist

    4 weeks ago

    Canton, United States Aerotek Full time

    CNC Machinist | 1st shift (7a-3p) | $25-$35/HR | Canton, OH **Description:** - Operate, Set up and Program CNC Machines to manufacture coponents - Run 4-Axis mills and Manual Lathes: Use ProtoTrak equipment - Machine various metals such as copper, brass and stainless - Conversational Programming - Use G&M code with CAM Software - Read Blueprints - Use...

  • Machinist

    2 months ago

    Canton, United States Ohio Gratings Full time

    SUMMARY: A CNC (Computer Numerical Control) machinist operates and programs machine tools such as lathes, mills, and grinders that are controlled by a computer to produce precision metal parts. The CNC Machinist will operate machine tools to fabricate and manufacture machine parts.This job description does not describe all activities, duties,...

  • CNC Machinist

    3 months ago

    Canton, United States Kuttler Machine Full time

    Job DescriptionJob DescriptionKuttler Machine, is a multi-faceted machine shop that serves several different industries has openings for experienced CNC machinists!Responsibilities: Programming and machining parts to tight tolerancesRequirements: Ability to comprehend complex prints, and work independently to completeprojects as required.3 years’...

  • CNC Machinist

    4 weeks ago

    Canton, United States Kuttler Machine Full time

    Job DescriptionJob DescriptionKuttler Machine, is a multi-faceted machine shop that serves several different industries has openings for experienced CNC machinists!Responsibilities: Programming and machining parts to tight tolerancesRequirements: Ability to comprehend complex prints, and work independently to completeprojects as required.3 years’...

  • Cnc Machinist

    3 weeks ago

    Canton, United States Aerotek Full time

    **Job Title: CNC Machinist expert level - 1st Shift** **Job Description** Seeking a skilled CNC Machinist to operate, set up, and program CNC Machines with live tooling to manufacture various metal components. This role involves leading and expanding the CNC machining department, operating 4-axis mills, and manual lathes using ProtoTrak equipment. The...

  • Machinist

    2 weeks ago

    Canton, United States Precision Component Industries LLC Full time

    Job DescriptionJob DescriptionSUMMARY: A CNC (Computer Numerical Control) machinist operates and programs machine tools such as lathes, mills, and grinders that are controlled by a computer to produce precision metal parts. The CNC Machinist will operate machine tools to fabricate and manufacture machine parts.This job description does not describe all...

  • Machinist

    4 weeks ago

    Canton, United States Precision Component Industries , LLC Full time

    SUMMARY: A CNC (Computer Numerical Control) machinist operates and programs machine tools such as lathes, mills, and grinders that are controlled by a computer to produce precision metal parts. The CNC Machinist will operate machine tools to fabricate and manufacture machine parts. This job description does not describe all activities, duties,...

  • Machinist

    4 weeks ago

    Canton, United States Precision Component Industries LLC Full time

    Job DescriptionJob DescriptionSUMMARY: A CNC (Computer Numerical Control) machinist operates and programs machine tools such as lathes, mills, and grinders that are controlled by a computer to produce precision metal parts. The CNC Machinist will operate machine tools to fabricate and manufacture machine parts.This job description does not describe all...

  • CNC Machinist

    2 weeks ago

    Canton, United States Ohio Gratings Inc. Full time

    Job DescriptionJob DescriptionSUMMARY: A CNC (Computer Numerical Control) machinist operates and programs machine tools such as lathes, mills, and grinders that are controlled by a computer to produce precision metal parts. The CNC Machinist will operate machine tools to fabricate and manufacture machine parts.This job description does not describe all...

  • CNC Machinist

    4 weeks ago

    Canton, United States Ohio Gratings Inc. Full time

    Job DescriptionJob DescriptionSUMMARY: A CNC (Computer Numerical Control) machinist operates and programs machine tools such as lathes, mills, and grinders that are controlled by a computer to produce precision metal parts. The CNC Machinist will operate machine tools to fabricate and manufacture machine parts.This job description does not describe all...

  • Manual Machinist

    2 weeks ago

    Canton, United States Gpac Full time

    POSITION: Manual MachinistPrimary Responsibilities:Perform repair and fabrication of components for ac/dc motors, generators, pumps, gearboxes, turbines, etc. using manual lathes, mills, shapers, drill presses, grinders as well as electroplating. Candidate must apply knowledge of machining procedures, mechanics, mathematics, metal properties and layout....

  • Manual Machinist

    10 hours ago

    Canton, United States gpac Full time

    POSITION: Manual Machinist Primary Responsibilities: Perform repair and fabrication of components for ac/dc motors, generators, pumps, gearboxes, turbines, etc. using manual lathes, mills, shapers, drill presses, grinders as well as electroplating. Candidate must apply knowledge of machining procedures, mechanics, mathematics, metal properties and layout....

  • Toolmaker

    2 months ago

    East Canton, United States Job Juncture Full time

    Title: Toolmaker Are you a skilled machinist with a passion for precision manufacturing? We are seeking an experienced and enthusiastic Toolmaker to join our team. As a Toolmaker, you will play a crucial role in fabricating tooling, fixtures, and complex assemblies with tight tolerances. If you have a strong background in machining and a keen eye for...