Quality Inspector

2 months ago

Memphis, United States Hyosung HICO, Ltd. Full time

The Quality Inspector will perform in-process inspections during the manufacturing process to determine the quality of parts, assemblies and sub-assemblies are meeting specifications. Professionally document nonconformances as they are found within manufacturing processes and products. Inspect incoming components, parts, and materials for conformance. Execute the calibration program and maintain compliance.

SUMMARY:

THE ESSENTIAL FUNCTIONS OF THE POSITION INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING:

•Understand applicable Quality Assurance and Manufacturing Department procedures, and analyze and interpret drawings, manuals or other information required to determine specifications, inspections procedures, adjustments and certification methods.
•Perform Inspection, test (chemical analysis), or measure materials, products for conformance to specifications.
•Handling to documented information made by quality department. (e.g. NCR, Inspection/test report, etc)
•Notify production supervisors and other personnel of production problems and assist in identifying and correcting the problems. Assist production personnel in solving minor problems and drawing interpretation as needed.
•Perform inspections using tools, equipment, and instruments. Compare results to specifications and complete the necessary documentation.
•Observe and monitor production operations and equipment to ensure process and product conformance to specifications and make or direct necessary adjustments.
•Practice 6S and adhere to all safety rules, guidelines and safe working practices.
•Safely operate material handling and lifting equipment such as overhead cranes, forklifts, pallet jacks, motorized scissors lifts and work platforms as required.
•Prepare and execute parts or transformer for inspection and prepare a "safe" environment for inspection
•Using available inspection/test procedures and data to set up, inspection/test and assist in the evaluation of the electrical and mechanical performance of each transformer unit.
•Perform calibration/repairs of equipment as required. Fabricate, install and test out equipment related to the inspection/testing operations. Keep inspection/test equipment, inspection/test areas and all related areas clean and orderly.
•Guide and assist in training other personnel as needed and where applicable.
•Support and make recommendations to improve Hyosung HICO's policies and procedures.
•Further the goals and positive, professional image of the Quality Department.
•Know Hyosung HICO's Quality and Environmental Policies. Be able to fully discuss the importance of these policies and how they impact work.

THE DESCRIPTION ABOVE REPRESENTS THE MOST SIGNIFICANT ESSENTIAL DUTIES OF THE JOB BUT DOES NOT EXCLUDE OTHER OCCASIONAL WORK ASSIGNMENTS NOT MENTIONED

THE NON-ESSENTIAL FUNCTIONS OF THE POSITION INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING:
•Perform other duties as assigned.
•Perform tool and inspection equipment calibration as required.
•Assist with on-the-job training.

REQUIREMENTS:

EDUCATION/SPECIAL SKILLS/EXPERIENCE/TRAINING:
•High school or GED; Trade or vocational school degree desired.
•Minimum three years previous work-related experience in the Quality Assurance field or equivalent education and experience.
•Basic knowledge of ISO 9001 standard and quality requirements
•Ability to read and understand mechanical and technical drawings.
•Developed computer skills for entering and retrieving data.
•Developed math and trigonometry skills.
•Developed verbal and written communications skills.
•Knowledge and use of basic industrial measuring tools needed.
•Experience using inspection tools, instruments and equipment required.

PHYSICAL/MENTAL CHARACTERISTICS OF THE POSITION AND ENVIRONMENTAL FACTORS OF THE WORKPLACE:•Ability to read, write, and follow instructions.
•Ability to relate well with co-workers.
•Ability to use independent judgment in evaluation of quality issues.
•Ability to use basic hand and power tools.
•Ability to work in confined spaces.
•Ability to work from heights, ladders, scaffolds, and elevated platforms.
•Ability to stand and walk 6-8 hours per day.
•Ability to climb ladders and/or stairs 10-15 times per day.
•Ability to squat, crawl, bend, stretch, and kneel.
•Ability to lift and carry up to 35 pounds frequently and up to 50 pounds occasionally.
•Ability to use basic hand and power tools.
•Ability to perform repetitive movements.

Hyosung HICO, Ltd., is an Equal Employment Opportunity (EEO) Employer. It has been and will continue to be a fundamental policy of Hyosung HICO, Ltd., not to discriminate on the basis of race, color, creed, religion, gender, gender identity, pregnancy, marital status, partnership status, domestic violence victim status, sexual orientation, age, national origin, alienage or citizenship status, veteran or military status, disability, medical condition, genetic information, caregiver status, unemployment status or any other characteristic prohibited by federal, state and/or local laws.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

  • Quality Control Inspector

    2 months ago

    Memphis, United States Owens Corning Full time

    Quality Control Inspector Location(s): Memphis, TN, US, 38107 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 63309 PURPOSE OF THE JOB The...

  • Quality Control Inspector

    2 months ago

    Memphis, United States Owens Corning Full time

    Quality Control Inspector Location(s): Memphis, TN, US, 38107 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 63309 PURPOSE OF THE JOB The...

  • Quality Control Inspector

    2 months ago

    Memphis, United States Owens Corning Full time

    PURPOSE OF THE JOBThe primary objective of the Quality Control Inspector position is to perform testing and recording to ensure quality standards are maintained in raw and finished product. Interfaces with appropriate plant employees to provide process and quality control information.JOB RESPONSIBILITIES Comply with all safety and plant requirements...

  • Quality Control Inspector

    2 months ago

    Memphis, United States Owens Corning Full time

    PURPOSE OF THE JOB The primary objective of the Quality Control Inspector position is to perform testing and recording to ensure quality standards are maintained in raw and finished product. Interfaces with appropriate plant employees to provide process and quality control information. JOB RESPONSIBILITIES Comply with all safety and plant requirements...

  • Quality Control Inspector

    2 months ago

    Memphis, United States Owens Corning Full time

    PURPOSE OF THE JOB The primary objective of the Quality Control Inspector position is to perform testing and recording to ensure quality standards are maintained in raw and finished product. Interfaces with appropriate plant employees to provide process and quality control information. JOB RESPONSIBILITIES Comply with all safety and plant requirements...

  • Inspector

    3 weeks ago

    Memphis, United States Allworld Project Management Full time

    Field and Housing Inspector; part-time position Allworld Project Management, LLC (AWPM) is an award-winning Engineering & Construction Project Management Firm on a mission to exceed client's expectations by delivering value added solutions one task at a time. AWPM is based in Downtown Memphis, TN, with offices in Houston, TX and Birmingham, AL. Benefits: ...

  • Inspector

    3 weeks ago

    Memphis, United States Disability Solutions Full time

    Field and Housing Inspector; part-time positionAllworld Project Management, LLC (AWPM) is an award-winning Engineering & Construction Project Management Firm on a mission to exceed client's expectations by delivering value added solutions one task at a time. AWPM is based in Downtown Memphis, TN, with offices in Houston, TX and Birmingham, AL.Benefits:Health...

  • Inspector

    4 weeks ago

    Memphis, United States ALLWORLD PROJECT MANAGEMENT LLC Part time

    Job DescriptionJob DescriptionField and Housing Inspector; part-time positionAllworld Project Management, LLC (AWPM) is an award-winning Engineering & Construction Project Management Firm on a mission “to exceed client's expectations by delivering value added solutions one task at a time. AWPM is based in Downtown Memphis, TN, with offices in Houston,...

  • Inspector of Residential Properties

    1 month ago

    Memphis, Tennessee, United States Allworld Project Management Full time

    Job Title: Field and Housing InspectorAt Allworld Project Management, we are seeking a highly skilled Field and Housing Inspector to join our team. As a Field and Housing Inspector, you will be responsible for evaluating and ensuring the quality, safety, and compliance of residential properties.Key Responsibilities:Conduct comprehensive inspections of...

  • Mechanical Inspector

    2 months ago

    Memphis, United States Verify Full time

    Overview: Industry: Aerospace/Defense Position: Mechanical Inspector Location: Memphis TN and surrounding areas Duration: On-going contract Frequency: approx 8-16/hrs per week - 1099 Job Description: The quality inspector - Mechanical, shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts,...

  • Mechanical Inspector

    2 months ago

    Memphis, United States Verify Full time

    Overview: Industry: Aerospace/Defense Position: Mechanical Inspector Location: Memphis TN and surrounding areas Duration: On-going contract Frequency: approx 8-16/hrs per week - 1099 Job Description: The quality inspector - Mechanical, shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts,...

  • Room Inspector

    5 months ago

    Memphis, United States Charlestowne Hotels Full time

    Rooms InspectorThe Rooms Inspector is responsible for assisting in the successful operation and administration of the housekeeping department, such as staff training, coaching, counseling and enforcing the hotels standard operating procedures. The Rooms Inspector must ensure that the housekeeping department is continually balanced, while focusing on...

  • Quality Inspector

    2 months ago

    Memphis, United States Hyosung HICO, Ltd. Full time

    The Quality Inspector will perform in-process inspections during the manufacturing process to determine the quality of parts, assemblies and sub-assemblies are meeting specifications. Professionally document nonconformances as they are found within manufacturing processes and products. Inspect incoming components, parts, and materials for conformance....

  • Quality Inspector-1st Shift

    2 months ago

    Memphis, United States Hyosung HICO, Ltd. Full time

    The Quality Inspector will perform in-process inspections during the manufacturing process to determine the quality of parts, assemblies and sub-assemblies are meeting specifications. Professionally document nonconformances as they are found within manufacturing processes and products. Inspect incoming components, parts, and materials for conformance....

  • Quality Inspector-1st Shift

    2 months ago

    Memphis, United States Hyosung HICO, Ltd. Full time

    The Quality Inspector will perform in-process inspections during the manufacturing process to determine the quality of parts, assemblies and sub-assemblies are meeting specifications. Professionally document nonconformances as they are found within manufacturing processes and products. Inspect incoming components, parts, and materials for conformance....

  • Quality Inspector

    2 months ago

    Memphis, United States Hyosung HICO, Ltd. Full time

    The Quality Inspector will perform in-process inspections during the manufacturing process to determine the quality of parts, assemblies and sub-assemblies are meeting specifications. Professionally document nonconformances as they are found within manufacturing processes and products. Inspect incoming components, parts, and materials for conformance....

  • Automotive Mechanical Inspector

    2 months ago

    Memphis, United States Alacrity Solutions Full time

    Alacrity Solutions Independent Contractor Automotive Mechanical InspectorAbout Alacrity Solutions Alacrity Solutions is a full end-to-end provider delivering streamlined insurance claims, repair, and recovery solutions. As one of the largest independent providers of insurance claims services in North America, we provide property, auto, heavy equipment, and...

  • Housing Inspector Position

    4 weeks ago

    Memphis, Tennessee, United States Allworld Project Management Full time

    Job Summary: We are seeking a skilled Housing Inspector to join our team at Allworld Project Management. As a Housing Inspector, you will be responsible for evaluating and ensuring the quality, safety, and compliance of residential properties. This role involves inspecting homes and apartments to confirm adherence to building codes, health and safety...

  • Automotive Mechanical Inspector

    2 months ago

    Memphis, United States Alacrity Solutions Full time

    Alacrity SolutionsIndependent ContractorAutomotive Mechanical InspectorAbout Alacrity SolutionsAlacrity Solutions is a full end-to-end provider delivering streamlined insurance claims, repair, and recovery solutions. As one of the largest independent providers of insurance claims services in North America, we provide property, auto, heavy equipment, and...

  • Quality Control Inspector

    4 days ago

    Memphis, United States uLab Systems Inc Full time

    Job Type Full-timeDescriptionThe Quality Inspector performs inspections, checks, tests, sampling procedures, and lot release of incoming materials, subassemblies, finished goods, parts, and components used in the manufacture of dental aligner medical devices. RequirementsRESPONSIBILITIES:•Performs inspections of purchased parts according to material...