Controls Engineer

2 days ago


Calabasas, United States Wunderlich-Malec Full time

Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is:100% employee-owned with 40+ years of industry historyA Top 5 Systems Integrator GiantENR top 500 firm at #170We have a Controls Engineer position open in Calabasas, CA. This position is responsible for electrical/controls engineering on large-scale projects. Project requirements involve control system design from scratch (hardware/software/network), electrical panel design and power calculations, risk assessment, component selection and configuration, control system programming, and control system installation/commissioning.Major Responsibilities:Responsible for system design from blank sheet of paper to create concept of electrical/control components based on project requirements.Experience doing design via drafting software (AutoCAD preferred)Provide input, and system modification as needed, for system integration with other project disciplinesAble to interface with facility design to optimize panel location minimizing voltage drop and designing a more efficient system hardware layoutManage vendor scope to verify safety, functionality, and all contract requirements are satisfiedEnsures design complies with any local or government agency design/implementation codes in addition to client codes/standardsProject technical risk assessment document generation and mitigation implementationDesign and analysis for safety-critical parts within a control systemDesigning redundant mitigations in system to increase safety and reliabilityDesigning systems with complex motion and integration from automated systemsDevelops documents of system configuration and design. Documents include Description of operation, Detailed control system design description, panel assembly drawings and schematics, termination drawings, network layout, system implementation/acceptance test plans, system routine maintenance/job plansAble to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction/cancellation, power consumption, load flow, short circuit protection, protective relay/circuit design, ground fault monitoring, safety system implementation (SIL/PL rating knowledge is preferred)Knowledge of ride system design for attractions involving guests is preferredCapable of working "off" shifts as needed during installation/commissioning to support projectJob Requirements:Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters.Education - bachelor's degree in electrical engineering. (Bachelor's degrees in other disciplines may be acceptable if work experience is directly related to electrical engineering. Disciplines outside of the electrical/controls area will not be considered)Experience - 5+ years of experience covering most responsibilities listed above. Preferred experience in ASTM standards, attractions industry, and safety engineering.Key Competencies - Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving. Experience working with hardware/software from one of the major industrial manufacturers (i.e. Allen-Bradly, Siemens, etc.). Experience with ethernet-based distributed remote I/O systems.Skills - All employees are required to be proficient in the use of Microsoft Windows and Office environments.Travel - Ability to travel up to 30% worst case (10% worst case with last couple of years of projects).Physical Demands of Position Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pullingWorking Conditions Expected to be on client location 5 days a week, Standard office environment, On-site office environment, and diverse industrial/construction environments. Frequent PC usage, copy machines, phones.*Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job.They reflect principal job elements essential for performing the job and evaluating performanceExpected salary rate is approximately $135,000 per year depending on qualifications.#LI-DW1#LI-HybridEqual Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)


  • Controls Engineer

    5 days ago


    Calabasas, United States Wunderlich-Malec Full time

    Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is:100% employee-owned company with over 40 years of industry historyA Top 5 Systems Integrator GiantENR top 500 firm at #170We have a Controls Engineer...


  • Calabasas, United States Premier Group Recruitment Full time

    Job DescriptionJob DescriptionJOB – Control System Engineer LOCATION – Calabasas, CA TERM – Permanent SALARY – $120,000 - $135,000 + bonus My client - one of the nation’s largest and most established engineering firms, is seeking a skilled Control System Engineer to join their team on a permanent basis. The ideal candidate will be...


  • Calabasas, California, United States Wunderlich-Malec Full time

    Job Title: Electrical Controls EngineerWunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States.We are seeking a highly skilled Electrical Controls Engineer to join our team in Calabasas, CA. As a key member of our engineering team, you will be responsible for...


  • Calabasas, California, United States Wunderlich-Malec Engineering Full time

    Job Title: Controls EngineerWunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States.We are seeking a highly skilled Controls Engineer to join our team in Calabasas, CA. This position is responsible for electrical/controls engineering on large-scale...


  • Calabasas, United States Wunderlich-Malec Full time

    Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is:100% employee-owned company with over 40 years of industry historyA Top 5 Systems Integrator GiantENR top 500 firm at #170We have a Mid to Sr....


  • Calabasas, United States Wunderlich-Malec Full time

    Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is:100% employee-owned company with over 40 years of industry historyA Top 5 Systems Integrator GiantENR top 500 firm at #170We have a Mid to Sr....


  • Calabasas, United States Wunderlich-Malec Full time

    Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is:100% employee-owned with over 40+ years of industry historyA Top 5 Systems Integrator GiantENR top 500 firm at #170We have a Mid to Sr. Controls...


  • Calabasas, California, United States Wunderlich-Malec Engineering Full time

    Job Title: Controls EngineerWunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. As a Controls Engineer, you will become part of a company that is:100% employee-owned company with over 40 years of industry historyA Top 5 Systems Integrator GiantENR top 500...

  • Electrical Engineer

    3 weeks ago


    Calabasas, California, United States Wunderlich-Malec Engineering Full time

    Job Title: Controls EngineerWunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States.As a Controls Engineer at WM, you will be part of a company that values innovation, teamwork, and customer satisfaction.Key Responsibilities:Design and develop control systems...


  • Calabasas, California, United States Wunderlich-Malec Full time

    Wunderlich-Malec Engineering is a leading engineering company with over 40 years of experience in the industry. We are seeking a highly skilled Electrical Systems Engineer to join our team.This role is responsible for designing and implementing electrical and control systems for large-scale projects. The ideal candidate will have a strong background in...


  • Calabasas, California, United States Wunderlich-Malec Engineering Full time

    Job Title: Electrical Systems EngineerJob Summary:Wunderlich-Malec Engineering is a 100% employee-owned company with over 40 years of industry history. We are seeking an Electrical Systems Engineer to join our team. As an Electrical Systems Engineer, you will be responsible for designing and implementing electrical control systems for large-scale projects....

  • Automation Engineer

    1 month ago


    Calabasas, California, United States Trillium Staffing Full time

    Process Automation Engineer Job DescriptionTrillium Staffing is seeking a highly skilled Process Automation Engineer to join our team. As a key member of our engineering team, you will be responsible for designing, implementing, and maintaining process automation solutions for pharmaceutical process applications.Key Responsibilities:Design and implement...


  • Calabasas, California, United States Wunderlich-Malec Full time

    Job Title: Controls EngineerWunderlich-Malec Engineering is a 100% employee-owned company with a rich history of innovation and excellence. As a Controls Engineer, you will be part of a team that values collaboration, creativity, and technical expertise.Job SummaryWe are seeking a highly skilled Controls Engineer to join our team in Calabasas, CA. The...


  • Calabasas, California, United States Trillium Staffing Full time

    Process Automation EngineerTrillium Staffing is seeking a skilled Process Automation Engineer to join our team. This role involves designing, implementing, and maintaining process automation solutions for pharmaceutical process applications using Emerson DeltaV distributed control systems.Key Responsibilities:Design and implement process automation solutions...


  • Calabasas, California, United States HRL Laboratories LLC Full time

    Job SummaryWe are seeking a highly skilled Electrical Systems Engineer to join our team at HRL Laboratories LLC. As a key member of our team, you will contribute technical expertise and work collaboratively with scientists and engineers to develop next-generation RF/mmWave Subsystems.Key ResponsibilitiesDesign and implement high-performance electrical...


  • Calabasas, California, United States HRL Laboratories Full time

    Job Title: Analog/Mixed Signal IC Design EngineerHRL Laboratories is seeking a highly skilled Analog/Mixed Signal IC Design Engineer to join our team in Calabasas, California.Job Summary:We are looking for a talented IC design engineer to work on the design and testing of analog/mixed-signal integrated circuits, including data converters, signal generation...


  • Calabasas, California, United States HRL Laboratories LLC Full time

    HRL Laboratories LLC is seeking a highly skilled Analog/Mixed-Signal IC Design Engineer to join our team in Southern California. As a member of our Mixed Signal Solutions department, you will be part of a highly talented team of scientists and engineers working on cutting-edge research and development projects.Key Responsibilities:Design and test of...


  • Calabasas, California, United States HRL Laboratories LLC Full time

    About the RoleHRL Laboratories LLC is seeking an experienced Analog/Mixed-Signal IC Design Engineer to join our team in Southern California. As a key member of our Mixed Signal Solutions department, you will be responsible for designing and testing analog/mixed-signal integrated circuits for a range of diverse applications.Key ResponsibilitiesDesign and test...


  • Calabasas, California, United States HRL Laboratories LLC Full time

    Job SummaryHRL Laboratories LLC is seeking an experienced Analog/Mixed-Signal IC Design Engineer to join our team in Southern California. As a key member of our Mixed Signal Solutions department, you will be responsible for designing and testing analog/mixed-signal integrated circuits for a range of diverse applications.Key ResponsibilitiesDesign and test of...


  • Calabasas, California, United States PlanetArt Full time

    Job Title: Senior Application Security EngineerAbout the Role:PlanetArt is seeking a highly skilled Senior Application Security Engineer to join our Information Security department. As a key member of our team, you will play a vital role in developing and expanding our Application Security program. Your primary focus will be on ensuring the security and...