CNC Lathe Machinist

2 weeks ago

Fullerton, United States Motive Companies Full time

Details:

Position summary:

Prepares and sets up the CNC Lathes within the department for the fabrication of a variety of hardware used in the aircraft industry.

  • Sets up and operates 2 axis, sub-spindle, and y-axis lathes machines to produce quality parts within the standards on the route sheet.
  • Selects the correct speed and feeds for various materials according to operations designated on the route sheet.
  • Holds close tolerances with the standards of each operation outlined on the route sheet.
  • MUST HAVE OWN TOOLS
  • Knows threads for both tapping and chasing of internal and external classes.
  • Holds close tolerances with the standards of each operation outlined on the route sheets.
  • Must be able to check own work using measuring instruments, prior to obtaining first article inspection.
  • Inspects dimensions and surface finish of products.
  • Performs daily PM (check fluid levels, lubricating levels) as assigned.
  • Provide technical support to personnel in lower classifications.
  • Advises supervisor of better and more economical ways of completing operations on Material Removal Rate (depth of cut, feeds, and speeds) and tooling/process improvements.


Job Requirements

Details:

Essential skills and experience:

Thorough understanding of setting tool offsets and live tools (milling cutters). Knowledge of setting up CNC lathe/mill operations for use with ferrous, bar, and extrusion in various alloys. Understands 3-4 controls and must be able to learn a new control without formal training. Intermediate knowledge in the use of calipers, micrometers, height gage, or any measuring instrument required to check part correctly. Must be able to follow written and verbal instructions as well as interpret blueprints, sketches, and engineering data to plan and layout complete sequence of operations, according to the route sheets provided. Must be able to problem solve, perform first-time setup with minimal assistance, run multiple machines at the same time, read CNC programs, deburr parts, and program CNC Screw Machines, if assigned. Certified Operator or ability to receive Certified Operator status upon filling position.

Education and Experience:

Three to five years' experience in set up and operation of CNC Lathe

Certified Operator or ability to receive Certified Operator status upon filling position.

Must have U.S. Person Status such as US Citizenship, or Permanent/Temporary Resident

(Work Permit Not Accepted due to FAA Regulations as we work on Government Parts)

$28-$30 per hour DOE

2nd Shift (3PM Start Time + OT)

For more information email: RLane@motivecompanies.com

#MCTA1

  • CNC Lathe Machinist

    2 weeks ago

    Fullerton, United States ResourceMFG Full time

    summary CNC Lathe Machinist III-Looking for a CNC Lathe Machinist, Milling exp is a plus: Temp-Hire 2nd shift,2:30 pm to 11:00 pm but must be willing to work OT as needed. Later star times would be 4:30 pm to 3:00 am. (May train on days to start). Experience: Must have machinist tools, must be able to read a prints.Experience with calipers, mics, and MOB's...

  • CNC Lathe/VTL Machinist

    1 month ago

    Fullerton, United States Marton Precision Manufacturing Full time

    Job DescriptionJob Description We are an aerospace/space manufacturing company located in Fullerton, CA looking for CNC Lathe/VTL Machinists. We have been fortunate to continue working through the COVID shutdowns and we have a lot of new work coming our way. We are in need of a CNC Lathe/VTL machinist.This position will be responsible for setting-up,...

  • CNC Swiss Lathe Machinist

    1 day ago

    Fullerton, United States OurStaff Full time

    Job Description CNC SWISS LATHE MACHINIST Fullerton, CA 2nd shift Pay rate: DOE Job Summary & Responsibilities We are looking for an CNC Swiss Lathe Machinist to work for a machine shop located in Fullerton, CA. The Swiss Lathe Machinist will be responsible to verify settings by measuring positions, first-run part, and sample work pieces; adhering to...

  • CNC Swiss Lathe Machinist

    1 week ago

    Fullerton, United States OurStaff, LLC Full time

    CNC SWISS LATHE MACHINIST Fullerton, CA2nd shiftPay rate: DOEJob Summary & ResponsibilitiesWe are looking for an CNC Swiss Lathe Machinist to work for a machine shop located in Fullerton, CA. The Swiss Lathe Machinist will be responsible to verify settings by measuring positions, first-run part, and sample work pieces; adhering to drawing and process control...

  • CNC Swiss Lathe Machinist

    3 weeks ago

    Fullerton, United States OurStaff Full time

    Job DescriptionCNC SWISS LATHE MACHINIST Fullerton, CA2nd shiftPay rate: DOEJob Summary & ResponsibilitiesWe are looking for an CNC Swiss Lathe Machinist to work for a machine shop located in Fullerton, CA. The Swiss Lathe Machinist will be responsible to verify settings by measuring positions, first-run part, and sample work pieces; adhering to drawing and...

  • CNC Swiss Lathe Machinist

    2 weeks ago

    Fullerton, United States OurStaff, LLC Full time

    Job DescriptionJob DescriptionCNC SWISS LATHE MACHINIST Fullerton, CA2nd shiftPay rate: DOEJob Summary & ResponsibilitiesWe are looking for an CNC Swiss Lathe Machinist to work for a machine shop located in Fullerton, CA. The Swiss Lathe Machinist will be responsible to verify settings by measuring positions, first-run part, and sample work pieces; adhering...

  • CNC General Machinist

    5 days ago

    Fullerton, California, United States Aerotek Full time

    Description:Large aerospace manufacturer in Fullerton. They have a diverse portfolio of products. Looking for a 2nd shift (3pm-1:30am) General Machinist, CNC lathe and Mill machinist who is capable of the following: Essential Functions:• Sets up and operates conventional lathe, knee and column mill, drill press, surface grinder, and honing machines.•...

  • CNC Machinist A

    4 days ago

    Fullerton, United States Hydraflow Full time

    EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. About the Organization Hydraflow provides fluid transfer solutions that...

  • CNC Swiss Machinist

    5 days ago

    Fullerton, United States Aerotek Full time

    GUARANTEED AND CONSISTENT OVERTIME!! AEROSPACE MANUFACTURING FACILITY!! COMPANY BONUSES INCLUDED! Description: Large aerospace manufacturer in Fullerton looking for a 2nd shift swiss screw machinist. Position summary: Set-up and operates one or more CNC Screw Machines to perform a series of machining operations, such as boring, threading, facing, grooving,...

  • CNC Machine Operator

    1 day ago

    Fullerton, United States OurStaff Full time

    Job Description CNC MACHINE OPERATOR/ MACHINIST Fullerton, CA 1st and 2nd shift Job Summary & Responsibilities We are looking for an CNC Lathe or Mill Operator/Machinist to work for a machine shop located in Fullerton, CA. The Operator/Machinist will be responsible to verify settings by measuring positions, first-run part, and sample work pieces; adhering to...

  • CNC Machine Operator

    3 days ago

    Fullerton, United States OurStaff Full time

    Job DescriptionCNC MACHINE OPERATOR/ MACHINISTFullerton, CA1st and 2nd shiftJob Summary & ResponsibilitiesWe are looking for an CNC Lathe or Mill Operator/Machinist to work for a machine shop located in Fullerton, CA. The Operator/Machinist will be responsible to verify settings by measuring positions, first-run part, and sample work pieces; adhering to...

  • CNC Machine Operator

    1 week ago

    Fullerton, United States OurStaff, LLC Full time

    Job DescriptionJob DescriptionCNC MACHINE OPERATOR/ MACHINISTFullerton, CA1st and 2nd shiftJob Summary & ResponsibilitiesWe are looking for an CNC Lathe or Mill Operator/Machinist to work for a machine shop located in Fullerton, CA. The Operator/Machinist will be responsible to verify settings by measuring positions, first-run part, and sample work pieces;...

  • CNC Mill Machinist

    1 day ago

    Fullerton, United States Motive Companies Full time

    Details: Position summary:Prepares and sets up the CNC Mills within the department for the fabrication of a variety of hardware used in the aircraft industry.Sets up and operates 3, 4, and 5 axis CNC Mills to produce quality parts within the standards on the route sheet.Uses rotary table, index head, and various tooling used in CNC Mill Operations.Holds...

  • Machinist A

    4 days ago

    Fullerton, United States Hydraflow Full time

    EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. About the Organization Hydraflow provides fluid transfer solutions that...

  • CNC Screw Machinist

    4 weeks ago

    Fullerton, United States Amtec Contract Full time

    Job DescriptionJob DescriptionPosition summary:Set-up and operates one or more CNC Screw Machines to perform a series of machining operations, such as boring, threading, facing, grooving, drilling, and turning.Essential Functions:Works from routers and standard work orders to produce parts to specifications.Loads bar feeders and monitors overall machine...