Welder-Fabricator

1 day ago

Palatka, United States TPG Pressure Inc Full time
Description

Position at TPG Pressure Inc

What We Offer
  • Top-tier Medical, Dental, and Vision Benefits
  • Life and Supplement Life
  • Company Matched 401K Retirement Plan
  • Paid Holidays
  • Fun Events
  • Training and Development
  • Employee Discounts
  • Career Opportunity
Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous.

Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country. Please visit our website at www.thompsonpipegroup.com

Thompson Pipe Group is currently looking for a 3G Flux Core Welder $22.00 to $28.00 per hour based on experience. Work hours are 6am to 2:30.

This person will be responsible for the interior and exterior of every spirally welded cylinder that enters their designated station for welding defects, base metal defects, and dimensional tolerances and repairs those cylinders to meet specification requirements.

Responsibilities
  • Follow all safety rules, policies, and procedures.
  • Inspect the entire interior and exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA C200 and additional job specifications as required.
  • Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch.
  • Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed.
  • Performs minor maintenance and repairs to welding equipment and tools.
  • Must properly use tools and care for equipment provided by the company to complete job tasks.
  • Maintain workstation by keeping it clean, organized, free from clutter and trip hazards.
  • Work under general supervision; will report to a crew leader and/or supervisor.
Essential Job Functions:
  • Must pass 3G with the back gouge and back weld with FCAW process
  • Must be able to maintain a 92% acceptance rate with ASME section 8 UW-51 (100% RT X-Ray)
  • This position frequently requires standing, sitting, kneeling, stooping, crawling, climbing, use of hands to handle objects, operate controls, and tools.
  • No limits of a range of motion.
  • Able to carry out instructions furnished in written, oral, and verbal form.
  • Must be experienced in flux-core welding, SMAW, SAW a plus.
  • Must be familiar with standard concepts, practices, and procedures within the welding field.
  • Utilize the flux-core welding process, cutting torch, hand-held grinders, and whatever other tools necessary to complete these repairs.
Competencies

To perform the job successfully an individual should demonstrate the following competencies.
  • Problem Solving and Innovation
  • Works well alone and in groups to identify and resolve problems in a timely manner
  • Meets challenges with resourcefulness and generates suggestions for improving work
  • Exhibits sound and accurate judgment.
  • Organizational Support: Follows all policies and procedures
  • Supports organization's goals and values
  • Communication: Listens and gets clarification Response well to questions
  • Writes clearly and informatively
  • Reads and interprets written information effectively
  • Presents numerical data effectively.
  • Dependability/Flexibility
  • The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock
  • Exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.)
Physical Demands
  • While performing the duties of this job, the employee is regularly required to stand, walk, reach with hands and arms, balance, stoop, kneel, or crouch.
  • The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds.
  • Regularly swings a 10-pound hammer.
  • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
Must be able to pass a pre-employment screening, which includes a physical and drug and alcohol testing.

Work Hours
  • Monday-Friday (Mandatory OT Saturdays based on business needs)
  • (Holidays are off)

  • Highly Skilled Fabrication Welder Wanted

    4 weeks ago

    Palatka, Florida, United States Veritas Steel LLC Full time

    Job OverviewWe are seeking a highly skilled Fabrication Welder to join our team at Veritas Steel LLC. As a key member of our production team, you will be responsible for ensuring the highest quality workmanship and meeting our stringent production demands.

  • Welder 2nd Shift Fabricator

    3 weeks ago

    Palatka, Florida, United States Veritas Steel LLC Full time

    Job SummaryA challenging opportunity has arisen for a skilled Welder to join the team at Veritas Steel LLC. This position involves performing high-quality welds in accordance with industry codes and standards, working safely, and adhering to company policies.Compensation PackageThe hourly wage for this role is $20-$24 per hour, depending on experience.About...

  • Industrial Steel Fabrication Welder

    4 weeks ago

    Palatka, Florida, United States Veritas Steel LLC Full time

    We are seeking an experienced Welder to join our team at Veritas Steel LLC in Palatka. As a key member of our fabrication department, you will be responsible for performing FCAW & SMAW processes to codes and standards.The ideal candidate will have experience with welding tools, codes, and procedures. You will work closely with our shop supervisor and other...

  • Welder-Fabricator

    2 days ago

    Palatka, United States TPG Pressure Inc Full time

    Description Position at TPG Pressure Inc What We Offer Top-tier Medical, Dental, and Vision Benefits Life and Supplement Life Company Matched 401K Retirement Plan Paid Holidays Fun Events Training and Development Employee Discounts Career Opportunity! Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers...

  • Substation Aluminum Welder and Construction Specialist

    1 month ago

    Palatka, Florida, United States Wanzek Construction Full time

    Job Summary: We are seeking a skilled Substation Welder and Aluminum Fabricator to join our team at Wanzek Construction. The successful candidate will be responsible for performing welding and cutting operations on aluminum bus and jumpers, as well as collaborating with other team members to ensure seamless workflow and project completion.Key...

  • Welder 2nd Shift

    1 month ago

    Palatka, United States Disability Solutions Full time

    2nd Shift starting at $18.00!53 Hour Work WeekMonday- Thursday 4:30pm - 4:30amFriday 2:30pm-9:30pmDouble Time After 50 hrs. Worked!*Train on 1st Shift (5am-4:30pm) At Veritas Steel, were leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best...

  • Welder 2nd Shift

    4 weeks ago

    Palatka, United States Veritas Steel LLC Full time

    Job DescriptionJob Description2nd Shift starting at $18.00!53 Hour Work WeekMonday- Thursday 4:30pm - 4:30amFriday 2:30pm-9:30pmDouble Time After 50 hrs. Worked!*Train on 1st Shift (5am-4:30pm)At Veritas Steel, we’re leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by...

  • Welder 2nd Shift

    1 month ago

    Palatka, United States Veritas Steel LLC Full time

    Job DescriptionJob Description2nd Shift starting at $18.00!53 Hour Work WeekMonday- Thursday 4:30pm - 4:30amFriday 2:30pm-9:30pmDouble Time After 50 hrs. Worked!*Train on 1st Shift (5am-4:30pm)At Veritas Steel, we’re leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by...

  • Welder 2nd Shift

    2 weeks ago

    Palatka, United States Veritas Steel LLC Full time

    Job DescriptionJob Description2nd Shift starting at $18.00!53 Hour Work WeekMonday- Thursday 4:30pm - 4:30amFriday 2:30pm-9:30pmDouble Time After 50 hrs. Worked!*Train on 1st Shift (5am-4:30pm)At Veritas Steel, we’re leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by...

  • Welder 2nd Shift

    4 days ago

    Palatka, United States Veritas Steel LLC Full time

    Job DescriptionJob Description2nd Shift starting at $18.00!53 Hour Work WeekMonday- Thursday 4:30pm - 4:30amFriday 2:30pm-9:30pmDouble Time After 50 hrs. Worked!*Train on 1st Shift (5am-4:30pm)At Veritas Steel, we’re leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by...

  • Welder 2nd Shift

    4 days ago

    East Palatka, United States Disability Solutions Full time

    2nd Shift starting at $18.00!53 Hour Work WeekMonday- Thursday 4:30pm - 4:30amFriday 2:30pm-9:30pmDouble Time After 50 hrs. Worked!*Train on 1st Shift (5am-4:30pm) At Veritas Steel, were leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best...

  • Fabricator 2nd Shift

    1 week ago

    Palatka, Florida, United States Veritas Steel LLC Full time

    Job Title: Fabricator 2nd ShiftWe are seeking a skilled and safety-conscious fabricator to join our production team at Veritas Steel LLC. As a key member of the team, you will be responsible for performing high-quality welds using FCAW and SMAW processes.The estimated salary for this position is $18.00 per hour (2nd Shift), making it an excellent opportunity...

  • Fabrication Specialist

    1 month ago

    Palatka, Florida, United States Disability Solutions Full time

    About UsAt Veritas Steel, we are leading the way in the bridge fabrication industry and aim to build a talented team.

  • Fabrication Department Head

    7 days ago

    Palatka, Florida, United States Veritas Steel LLC Full time

    Department Head Job DescriptionWe seek a seasoned Fabrication Department Head to oversee our production activities at Veritas Steel LLC's Palatka location. This position requires exceptional leadership skills, a deep understanding of organizational effectiveness, and a proven track record of driving business growth through operational excellence.The...

  • Experienced Metal Fabricator Wanted

    2 weeks ago

    Palatka, Florida, United States Tradesmen International Full time

    We are seeking a skilled Sheet Metal Installer to join our team at Tradesmen International in Palatka, FL. This first-shift opportunity offers up to $30/hour based on experience and skill level.Key Responsibilities:Install sheet metal duct workPrefabricate metal componentsRead and interpret blueprintsLay out and fabricate metal structuresRequirements:Must...

  • Senior Operations Manager for Fabrication and Production

    2 weeks ago

    Palatka, Florida, United States Veritas Steel LLC Full time

    Job OverviewThe Senior Operations Manager for Fabrication and Production at Veritas Steel LLC is responsible for overseeing the safe and efficient operation of multiple areas/departments across shifts. This role requires a strategic mindset, operational excellence, and continuous improvement to drive throughput and efficiency.Key Responsibilities:Safely...

  • Steel Fabrication Specialist 2nd Shift

    1 month ago

    Palatka, Florida, United States Veritas Steel LLC Full time

    Job OverviewWe are seeking a skilled Steel Fabrication Specialist to join our team at Veritas Steel LLC, working on the 2nd shift.Salary and BenefitsThe successful candidate will be rewarded with an estimated hourly wage of $19.50 - $23.16 per hour, depending on experience.Job ResponsibilitiesThis role involves performing FCAW & SMAW processes to codes and...

  • Machine Production Specialist

    4 weeks ago

    Palatka, Florida, United States thompsonpipegroup Full time

    Company OverviewThompson Pipe Group is a leading provider of drainage, sanitary, pressure and trench-less pipe solutions. With manufacturing locations across the country and serving North America, our company has grown from humble beginnings to become the largest and most diverse in its field.About the RoleWe are seeking a skilled Machine Operator to join...

  • Maintenance Technician

    2 weeks ago

    Palatka, United States The Judge Group Full time

    Job Description: Maintenance Technician - Food Manufacturing*OVERTIME PAY AS WELL*Job Duties:Ensure food safety and legality.Perform preventative maintenance and troubleshoot machinery.Identify and fix electrical issues using DMM.Follow and write lockout/tagout procedures.Inform production of maintenance schedules and perform necessary repairs.Check...

  • Maintenance Technician

    2 months ago

    Palatka, United States The Judge Group Full time

    Job Description: Maintenance Technician - Food ManufacturingJob Duties:Ensure food safety and legality.Perform preventative maintenance and troubleshoot machinery.Identify and fix electrical issues using DMM.Follow and write lockout/tagout procedures.Inform production of maintenance schedules and perform necessary repairs.Check inventory and report needed...