Manufacturing Engineer

3 weeks ago

Bethel, United States Resonetics Full time

Overview:

Introducing and establishing new systems and technology to facilitate the Production and Manufacturing of Nitinol Tube/Wire for Resonetics. Systems will pertain to Drawing, Heat Treating, Finishing, and other manufacturing processes. The Manufacturing Engineer will act as a technical liaison between Quality and Production.

This position will concentrate primarily on establishing and improving efficiencies in the manufacturing of Nitinol Tube/Wire. Additional areas of focus may include but are not limited to: setup reduction, operator training, statistical process control, tool design or selection, and performance metrics. Other daily responsibilities will include Router and Work Instruction generation, participation with quality in customer assistance, and designing continuous improvement plans for current production jobs. An important aspect of this position is the hands-on nature of this role. As improvements are identified, it will often be the responsibility of this individual to actually implement and re-qualify any changes.

Responsibilities:

Introduce and set-up manufacturing capacity for Nitinol Tube/Wire manufacturing.
Review existing process procedures for compliance to the designed process intent. Modify procedures as necessary and obtain approval from required cognizant engineers and change review board.
Develop and improve Production yields through the identification and implementation of new process controls and determine their effectiveness.
Work with manufacturing personnel to promote Lean Principles in the design and planning phase of the product.
Thoroughly document tasks including creation of required prints, work instructions, specifications, and Engineering studies and reports.
Troubleshoot manufacturing issues and develop a plan to contain, correct, and put preventive/corrective actions in place to reduce the possibility of reoccurrence.
Take ownership of manufacturing of products as they pass through the final stages of production readiness to ensure that quality awareness and product integrity are maintained into production. Assist with creation of Flow Charts, PFMEAs, and Control Plans for products transferring to production.
Develop understanding of key factors in Nitinol tube production (e.g. mechanical properties, dimensional control, etc) to become a subject matter expert.
Provide technical support for machine validation activities to insure a smooth transition into the production environment.
Constructively communicate with operators and other departments.
Serve as a leader and mentor in order to foster a culture of best Engineering and Safety practices.
For all work and development, the individual considers and appreciates Good Manufacturing Practices (GMP) as an evident part of all processes. The individual must also be a strong supporter of GMP and make it a personal goal to establish such a mind-set.
Determine job cost baselines and initiate cost reduction activities.
Provide assistance in job setup and process training for operators.
Weekly/monthly reporting of activities and chosen performance attributes.
Periodic Customer liaison for quality or continuation of engineering related issues. May assume project manager role for specific customer applications.
Apply statistical methods such as Design of Experiments, SPC, Capability Studies, etc

Qualifications:

BS or MS in Engineering with a minimum (2) years related experience, capable of working in a dynamic, fast paced environment.
Must be proficient with MS Office.
Must possess solid mechanical troubleshooting abilities.
Must demonstrate good oral and written communication skills.
Strong organizational, analytical, and planning skills with the ability to multi-task
Must be extremely flexible regarding priority changes.
Individual must be fluent in speaking, reading and writing English.
Must have the ability to read, analyze, and interpret procedures and/or safety manuals.

  • Manufacturing Engineering Co-op

    4 weeks ago

    Bethel, United States Resonetics Full time

    Overview: This position will support the Manufacturing Engineering group typically working as an assignee on smaller scale Manufacturing Engineering projects or tasks related to larger scale Manufacturing Engineering projects. The tasks/projects performed by this individual will typically be monitored or managed by a Manufacturing...

  • Manufacturing Engineering Co-Op

    3 weeks ago

    Bethel, United States Resonetics Full time

    Overview: This position will support the Manufacturing Engineering group typically working as an assignee on smaller scale Manufacturing Engineering projects or tasks related to larger scale Manufacturing Engineering projects. The tasks/projects performed by this individual will typically be monitored or managed by a Manufacturing Engineer....

  • Manufacturing Engineering Co-Op

    2 weeks ago

    Bethel, United States Resonetics Full time

    Overview: This position will support the Manufacturing Engineering group typically working as an assignee on smaller scale Manufacturing Engineering projects or tasks related to larger scale Manufacturing Engineering projects. The duration of this position will be from June thru August 2024. The primary focus for this position will be to complete remaining...

  • Manufacturing Engineering Co-Op

    2 weeks ago

    Bethel, United States Resonetics Full time

    Overview: This position will support the Manufacturing Engineering group typically working as an assignee on smaller scale Manufacturing Engineering projects or tasks related to larger scale Manufacturing Engineering projects. The duration of this position will be from June thru August 2024. The primary focus for this position will be to complete remaining...

  • Manufacturing Engineer

    2 days ago

    Bethel, United States William H Hunter Recruiting Full time

    Job DescriptionJob DescriptionThe Manufacturing Engineer at is responsible for providing engineering and production support to manufacturing facility in the areas of mold, fixture, automation design, as well as processing support and troubleshooting, and working with customers on a technical level. SPECIFIC RESPONSIBILITIES:  Designing production molds...

  • Electrical Engineer

    3 weeks ago

    Bethel, United States Konik Full time

    Job DescriptionJob DescriptionElectrical EngineerBethel, MN Area | Direct-hire | $80k - $110k | On-site 100%Konik is working with a manufacturing client in the North Metro to help identify an Electrical Engineer to join their team. The Electrical Engineer in this role will be focused on the design and development of circuit boards, equipment systems, and a...

  • Electrical Engineer

    2 weeks ago

    Bethel, United States Konik Full time

    Electrical EngineerBethel, MN Area | Direct-hire | $80k - $110k | On-site 100%Konik is working with a manufacturing client in the North Metro to help identify an Electrical Engineer to join their team. The Electrical Engineer in this role will be focused on the design and development of circuit boards, equipment systems, and a variety of...

  • Electrical Engineer

    2 weeks ago

    Bethel, United States Konik Full time

    Job DescriptionJob DescriptionElectrical EngineerBethel, MN Area | Direct-hire | $80k - $110k | On-site 100%Konik is working with a manufacturing client in the North Metro to help identify an Electrical Engineer to join their team. The Electrical Engineer in this role will be focused on the design and development of circuit boards, equipment systems, and a...

  • Electrical Engineer

    2 weeks ago

    Bethel, United States Konik Full time

    Job DescriptionJob DescriptionElectrical EngineerBethel, MN Area | Direct-hire | $80k - $110k | On-site 100%Konik is working with a manufacturing client in the North Metro to help identify an Electrical Engineer to join their team. The Electrical Engineer in this role will be focused on the design and development of circuit boards, equipment systems, and a...

  • Electrical Engineer

    4 days ago

    Bethel, United States Konik Full time

    Electrical EngineerBethel, MN Area | Direct-hire | $80k - $110k | On-site 100%Konik is working with a manufacturing client in the North Metro to help identify an Electrical Engineer to join their team. The Electrical Engineer in this role will be focused on the design and development of circuit boards, equipment systems, and a variety of...

  • New Product Introduction Engineer

    3 weeks ago

    Bethel, United States Resonetics Full time

    Overview: The Resonetics NPI (New Product Introduction) Engineer is a key member of the team ensuring Resonetics ability to document cutting edge medical device product manufacturing processes for transfer from development to large scale manufacturing. They work in unison as a core team member with the Product Development and Quality Engineering functions to...

  • New Product Introduction Engineer

    1 week ago

    Bethel, United States Resonetics Full time

    Overview: The Resonetics NPI (New Product Introduction) Engineer is a key member of the team ensuring Resonetics ability to document cutting edge medical device product manufacturing processes for transfer from development to large scale manufacturing. They work in unison as a core team member with the Product Development and Quality Engineering functions to...

  • Mechanical Design Engineer

    3 weeks ago

    Bethel, United States Belcan Full time

    Design Engineer for pressure transducer / sensors product design and evaluation. The primary function of the position is design work and project engineering support for both sustaining products and new product development. Product designs are evaluated with layouts, modeling, drawing creation using CAD (CATIA V5, Creo, AutoCAD) and the product release...

  • Design Engineer

    3 weeks ago

    Bethel, United States KolorBlue Solutions Full time

    Job Description Job Description Position Overview: Design Engineer for pressure transducer / sensors product design and evaluation. The primary function of the position is design work and project engineering support for both sustaining products and new product development. Product designs are evaluated with layouts, modeling, drawing creation using CAD...

  • Design Engineer

    4 weeks ago

    Bethel, United States KolorBlue Solutions Full time

    Job DescriptionJob DescriptionPosition Overview:Design Engineer for pressure transducer / sensors product design and evaluation. The primary function of the position is design work and project engineering support for both sustaining products and new product development.Product designs are evaluated with layouts, modeling, drawing creation using CAD (CATIA...

  • Design Engineer

    3 weeks ago

    Bethel, United States Belcan Full time

    Job Title: Design Engineer IIIContract: 12 Months, Belcan is a leading provider of professional IT, Engineering, Workforce Solutions and staffing in the United States, Canada, UK, Europe and India.A Design Engineer III Job in Bethel, CT is currently available through Belcan. In this role you will support product design activities of mechanical and electrical...

  • Design Engineer

    3 weeks ago

    Bethel, United States Belcan Full time

    Job Title: Design Engineer IIIContract: 12 Months, Belcan is a leading provider of professional IT, Engineering, Workforce Solutions and staffing in the United States, Canada, UK, Europe and India.A Design Engineer III Job in Bethel, CT is currently available through Belcan. In this role you will support product design activities of mechanical and electrical...

  • Design Engineer

    4 weeks ago

    Bethel, United States Belcan Full time

    Job Title: Design Engineer IIIContract: 12 Months, Belcan is a leading provider of professional IT, Engineering, Workforce Solutions and staffing in the United States, Canada, UK, Europe and India.A Design Engineer III Job in Bethel, CT is currently available through Belcan. In this role you will support product design activities of mechanical and electrical...

  • Mechanical Design Engineer

    4 weeks ago

    Bethel, United States Belcan Full time

    Design Engineer for pressure transducer / sensors product design and evaluation. The primary function of the position is design work and project engineering support for both sustaining products and new product development. Product designs are evaluated with layouts, modeling, drawing creation using CAD (CATIA V5, Creo, AutoCAD) and the product release...

  • Mechanical Design Engineer

    4 weeks ago

    Bethel, United States Belcan Full time

    Design Engineer for pressure transducer / sensors product design and evaluation. The primary function of the position is design work and project engineering support for both sustaining products and new product development.Product designs are evaluated with layouts, modeling, drawing creation using CAD (CATIA V5, Creo, AutoCAD) and the product release...